[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC i386 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.04-MHz 686-class CPU) [...] Origin="GenuineIntel" Id=0x106c2 Family=0x6 Model=0x1c Stepping=2 [...] Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 2147483648 (2048 MB) [...] avail memory = 2059153408 (1963 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <QUANTA WTW8 > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: MADT APIC ID 4 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1596036024 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0x14c87f0, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <QUANTA WTW8> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20200430/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x40c0-0x40c7 mem 0x94280000-0x942fffff,0x80000000-0x8fffffff,0x94300000-0x9433ffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel 945GME SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 7932k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0x94200000-0x9427ffff at device 2.1 on pci0 [...] hdac0: <Intel 82801G HDA Controller> mem 0x94340000-0x94343fff irq 16 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20200430/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pcib1: failed to allocate initial prefetch window: 0x90000000-0x90ffffff [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20200430/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 810xE PCIe 10/100baseTX> port 0x1000-0x10ff mem 0x91010000-0x91010fff,0x91000000-0x9100ffff irq 17 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x24800000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x4080-0x409f irq 16 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x4060-0x407f irq 17 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x4040-0x405f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x4020-0x403f irq 19 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x94344400-0x943447ff irq 16 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40a0-0x40af irq 17 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] ppc0: parallel port not found. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC268 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC268 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC268 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0 [...] pcm1: <Realtek ALC268 (Left Analog Mic)> at nid 24 on hdaa0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] ada0 at ata0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST9250315AS 0001SDM1> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 238475MB (488397168 512 byte sectors) [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub3: 8 ports with 8 removable, self powered [...] usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER [...] Root mount waiting for: usbus4 [...] ugen4.2: <JMicron USB to ATA/ATAPI Bridge> at usbus4 [...] umass0 on uhub3 [...] umass0: <MSC Bulk-Only Transfer> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] Root mount waiting for: usbus4 CAM [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <ST1000LM 024 HN-M101MBB > Fixed Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 953869MB (1953525168 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen4.3: <SuYin USB 2.0 Camera> at usbus4 [...] Root mount waiting for: usbus4 [...] ugen4.4: <ManufacturerRealtek RTL8187BWLANAdapter> at usbus4 [...] mountroot: waiting for device /dev/ada0s1a... [...] WARNING: /mnt/XXXXX was not properly dismounted [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] urtw0 on uhub3 [...] urtw0: <RTL8187BWLANAdapter> on usbus4 [...] urtw0: rtl8187b rf rtl8225z2 hwrev e [...] wlan0: Ethernet address: ... [...] ugen4.2: <JMicron USB to ATA/ATAPI Bridge> at usbus4 (disconnected) [...] umass0: at uhub3, port 1, addr 2 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <ST1000LM 024 HN-M101MBB > s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER [...] ugen4.2: <JMicron USB to ATA/ATAPI Bridge> at usbus4 [...] umass0 on uhub3 [...] umass0: <MSC Bulk-Only Transfer> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <ST1000LM 024 HN-M101MBB > Fixed Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 953869MB (1953525168 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] WARNING: /mnt/XXXXX was not properly dismounted [...] WARNING: /mnt/XXXXX was not properly dismounted [...] re0: link state changed to DOWN [...] re0: link state changed to UP