[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 stable/25.1-n269632-cc316253c68 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16591437824 (15822 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfcab0-0xfcace [...] smbios0: Version: 2.6, BCD Revision: 2.6 [...] aesni0: No AES or SHA support. [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xfcc0-0xfcdf mem 0xdf180000-0xdf19ffff,0xdf1a0000-0xdf1bffff irq 16 at device 0.0 on pci1 [...] em0: EEPROM V5.6-2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xfce0-0xfcff mem 0xdf1c0000-0xdf1dffff,0xdf1e0000-0xdf1fffff irq 17 at device 0.1 on pci1 [...] em1: EEPROM V5.6-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf0fa000-0xdf0fa3ff irq 22 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci2 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092008); [...] bce0: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci2 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092008); [...] bce1: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf0fc000-0xdf0fc3ff irq 22 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci3 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xecd0-0xecd7,0xecc8-0xeccb,0xecd8-0xecdf,0xeccc-0xeccf,0xece0-0xecff mem 0xdf0fe000-0xdf0fe7ff irq 20 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1196992512 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <INTEL SSDSC2BW480H6 RG20> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 457861MB (937700975 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Avocent USB Composite Device-0> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Avocent USB Composite Device-0, class 0/0, rev 1.10/0.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.3: <PixArt HP USB Optical Mouse> at usbus1 [...] ugen1.4: <SIGMACHIP HP Wired Keyboard> at usbus1 [...] ukbd1 on uhub3 [...] ukbd1: <SIGMACHIP HP Wired Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x0424 product 0x2514> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 5> on usbus1 [...] uhub4: MTT enabled [...] uhub4: 4 ports with 4 removable, self powered