[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250200-b5f29f8a713 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (2400.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16486211584 (15722 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 4 9 7 2 8 3 11 10 5 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7af0a000-0x7af0a01e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x2000-0x20ff mem 0x97100000-0x9710ffff,0x97000000-0x970fffff at device 0.0 numa-domain 0 on pci2 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 2296 (708950864s/0x0020/info) - Shutdown command received from host [...] mfi0: 2297 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f47/1028) [...] mfi0: 2298 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 2299 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 2300 (boot + 11s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 2301 (boot + 11s/0x0020/info) - Board Revision A08 [...] mfi0: 2302 (boot + 15s/0x0008/info) - Battery temperature is normal [...] mfi0: 2303 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 2304 (boot + 27s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 2305 (boot + 27s/0x0002/info) - Inserted: Encl PD 20 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0x96e00000-0x96efffff,0x96f0c000-0x96f0ffff at device 0.0 numa-domain 0 on pci3 [...] igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0x96d00000-0x96dfffff,0x96f08000-0x96f0bfff at device 0.1 numa-domain 0 on pci3 [...] igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0x96c00000-0x96cfffff,0x96f04000-0x96f07fff at device 0.2 numa-domain 0 on pci3 [...] igb2: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0x96b00000-0x96bfffff,0x96f00000-0x96f03fff at device 0.3 numa-domain 0 on pci3 [...] igb3: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fb7 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x93000000-0x93ffffff,0x94018000-0x9401ffff at device 0.0 numa-domain 0 on pci4 [...] ixl0: fw 7.83.59945 api 1.9 nvm 7.10 etid 800075e5 oem 19.4864.12 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 6 RX queues 6 TX queues [...] ixl0: Using MSI-X interrupts with 7 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: Failed to initialize SR-IOV (error=2) [...] ixl0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x92000000-0x92ffffff,0x94010000-0x94017fff at device 0.1 numa-domain 0 on pci4 [...] ixl1: fw 7.83.59945 api 1.9 nvm 7.10 etid 800075e5 oem 19.4864.12 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 6 RX queues 6 TX queues [...] ixl1: Using MSI-X interrupts with 7 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: Failed to initialize SR-IOV (error=2) [...] ixl1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x91000000-0x91ffffff,0x94008000-0x9400ffff at device 0.2 numa-domain 0 on pci4 [...] ixl2: fw 7.83.59945 api 1.9 nvm 7.10 etid 800075e5 oem 19.4864.12 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 6 RX queues 6 TX queues [...] ixl2: Using MSI-X interrupts with 7 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: Failed to initialize SR-IOV (error=2) [...] ixl2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x90000000-0x90ffffff,0x94000000-0x94007fff at device 0.3 numa-domain 0 on pci4 [...] ixl3: fw 7.83.59945 api 1.9 nvm 7.10 etid 800075e5 oem 19.4864.12 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 6 RX queues 6 TX queues [...] ixl3: Using MSI-X interrupts with 7 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 8 queues for PF LAN VSI; 6 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: Failed to initialize SR-IOV (error=2) [...] ixl3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci1 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci1: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x97211000-0x972117ff at device 17.4 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x97200000-0x9720ffff at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] pci1: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x97213000-0x972133ff at device 26.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1 [...] pci6: <PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci1 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 [...] pci8: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] vgapci0: <VGA-compatible display> mem 0x95000000-0x95ffffff,0x96800000-0x96803fff,0x96000000-0x967fffff at device 0.0 numa-domain 0 on pci10 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x97212000-0x972123ff at device 29.0 numa-domain 0 on pci1 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x97210000-0x972107ff at device 31.2 numa-domain 0 on pci1 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a6100001800 [...] device_attach: est11 attach returned 6 [...] Timecounter "TSC-low" frequency 1199997865 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mfisyspd0 numa-domain 0 on mfi0 [...] mfisyspd0: 114473MB (234441648 sectors) SYSPD volume (deviceid: 0) [...] mfisyspd0: SYSPD volume attached [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] mfisyspd1 numa-domain 0 on mfi0 [...] mfisyspd1: 114473MB (234441648 sectors) SYSPD volume (deviceid: 1) [...] mfisyspd1: SYSPD volume attached [...] mfi0: 2306 (boot + 27s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e0940602b051uhub0200,0000000000000000 [...] mfi0: 2307 (boot + 27s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 numa-domain 0 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] mfi0: 2308 (boot + 27s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221104000000,0000000000000000 [...] mfi0: 2309 (boot + 27s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] mfi0: 2310 (boot + 27s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 2311 (boot + 27s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 2312 (boot + 27s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 2313 (boot + 27s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] mfi0: 2314 (708950896s/0x0020/info) - Time established as 06/19/22 10:48:16; (27 seconds since power on) [...] mfi0: 2315 (708950941s/0x0020/info) - Host driver is loaded and operational [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl0: link state changed to UP [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl1: link state changed to UP [...] ixl2: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl2: link state changed to UP [...] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] ixl3: link state changed to UP [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <Quectel EM12-G> at usbus0 [...] u3g0 numa-domain 0 on uhub0 [...] u3g0: <Quectel EM12-G, class 0/2, rev 2.00/3.18, addr 1> on usbus0 [...] u3g0: Found 5 ports. [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub5 numa-domain 0 on uhub0 [...] uhub5: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] Dual Console: Serial Primary, Video Secondary