[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2667 v2 @ 3.30GHz (3300.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33301757952 (31759 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 9 2 3 11 13 7 6 5 8 12 4 15 14 10 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xfb410000-0xfb41ffff,0xfb400000-0xfb40ffff irq 26 at device 0.0 on pci1 [...] bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfb600000-0xfb6fffff,0xfb784000-0xfb787fff irq 40 at device 0.0 on pci3 [...] igb0: EEPROM V0.93-0 eTrack 0x800005fd [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfb500000-0xfb5fffff,0xfb780000-0xfb783fff irq 44 at device 0.1 on pci3 [...] igb1: EEPROM V0.93-0 eTrack 0x800005fd [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfbf07000-0xfbf073ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Patsburg HDA Controller> mem 0xfbf00000-0xfbf03fff irq 22 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbd00000-0xfbd0ffff,0xfbd10000-0xfbd11fff irq 17 at device 0.0 on pci6 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfbc00000-0xfbc07fff irq 18 at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] bge1: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xfb310000-0xfb31ffff,0xfb300000-0xfb30ffff irq 19 at device 0.0 on pci8 [...] bge1: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM57765 1000BASE-T media interface> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <serial bus, FireWire> at device 0.0 (no driver attached) [...] pcib10: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfb900000-0xfb9001ff irq 18 at device 0.0 on pci10 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfb800000-0xfb8001ff irq 19 at device 0.0 on pci11 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfbf06000-0xfbf063ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Patsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbf05000-0xfbf057ff irq 19 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahcich6: <AHCI channel> at channel 2 on ahci2 [...] ahcich7: <AHCI channel> at channel 3 on ahci2 [...] ahcich8: <AHCI channel> at channel 4 on ahci2 [...] ahcich9: <AHCI channel> at channel 5 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> on ahci2 [...] pcib13: <ACPI Host-PCI bridge> on acpi0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 254f00002400 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 254f00002400 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 254f00002400 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 252600002400 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 254f00002400 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 254f00002400 [...] device_attach: est13 attach returned 6 [...] Timecounter "TSC-low" frequency 1649929130 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Creative CA0132 HDA CODEC> at cad 1 on hdac0 [...] hdaa0: <Creative CA0132 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Creative CA0132 (Analog)> at nid 11 and 17 on hdaa0 [...] pcm1: <Creative CA0132 (Rear Digital)> at nid 12 on hdaa0 [...] pcm2: <Creative CA0132 (Front Analog)> at nid 16 and 18 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM usbus3 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen1.1: <0x104c XHCI root HUB> at usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <0x104c XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub3 on usbus3 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ses0 at ahciem0 bus 0 scbus10 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 500GB RVT02B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 03', SATA Slot: scbus7 target 0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus3 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus3 [...] uhub5: 8 ports with 8 removable, self powered [...] ugen3.3: <Realtek 802.11n WLAN Adapter> at usbus3