[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x12 to 0x21 [...] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (3503.65-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16580878336 (15812 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 5 7 4 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0a) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7520000-0xf752ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579V> port 0xf040-0xf05f mem 0xf7500000-0xf751ffff,0xf7539000-0xf7539fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.15-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7538000-0xf75383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xf7530000-0xf7533fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xf7410000-0xf74101ff irq 17 at device 0.0 on pci3 [...] ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahci0: quirks=0x1000000<IOMMU_BUSWIDE> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <serial bus, FireWire> at device 1.0 (no driver attached) [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8161 PCIe Gigabit Ethernet> port 0xb000-0xb07f mem 0xf7200000-0xf723ffff irq 18 at device 0.0 on pci6 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSIX message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <Marvell 88SE9172 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xf7110000-0xf71101ff irq 19 at device 0.0 on pci7 [...] ahci1: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahci1: quirks=0x1000000<IOMMU_BUSWIDE> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7537000-0xf75373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Panther Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7536000-0xf75367ff irq 19 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> on ahci2 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1751722570 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0040) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0040) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALC899 (Onboard Digital)> at nid 17 on hdaa1 [...] pcm7: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] ada0 at ahcich5 bus 0 scbus4 target 0 lun 0 [...] ada0: <OCZ-AGILITY3 2.22> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus4 target 0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] WARNING: / was not properly dismounted [...] WARNING: /: mount pending error: blocks 408 files 284 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_STALLED, port 7, addr 2 (ignored) [...] ugen0.2: <VIA Labs, Inc. 4-Port USB 3.0 Hub> at usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Dell Dell USB Keyboard Hub> at usbus1 [...] uhub5 on uhub4 [...] uhub5: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus1 [...] uhub5: 3 ports with 2 removable, bus powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] ugen1.4: <Dell Dell USB Keyboard Hub> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.5: <vendor 0x2109 USB2.0 Hub> at usbus1 [...] uhub6 on uhub4 [...] uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/42.47, addr 5> on usbus1 [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_STALLED, port 8, addr 3 (ignored) [...] ugen0.3: <VIA Labs, Inc. 4-Port USB 3.0 Hub> at usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] ugen1.6: <vendor 0x2109 USB2.0 Hub> at usbus1 [...] uhub7 on uhub4 [...] uhub7: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/42.47, addr 6> on usbus1 [...] uhub7: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7535000-0xf75350ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] uhid0 on uhub5 [...] uhid0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] alc0: link state changed to DOWN [...] alc0: link state changed to UP [...] tap9993: Ethernet address: ... [...] tap9993: changing name to 'zt72qjdvseumka4' [...] zt72qjdvseumka4: link state changed to UP [...] em0: promiscuous mode enabled [...] alc0: promiscuous mode enabled [...] pid 61120 (ntopng), jid 0, uid 288: exited on signal 11 (no core dump - bad address) [...] em0: promiscuous mode disabled [...] alc0: promiscuous mode disabled [...] pid 92787 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 73342 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 76452 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 36439 (python3.11), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] [...] [...] Fatal trap 12: page fault while in kernel mode [...] cpuid = 3; apic id = 03 [...] fault virtual address = 0xfffffa0050b1cb70 [...] fault code = supervisor write data, page not present [...] instruction pointer = 0x20:0xffffffff80f797e3 [...] stack pointer = 0x28:0xffffffff82cb5580 [...] frame pointer = 0x28:0xffffffff82cb5af0 [...] code segment = base 0x0, limit 0xfffff, type 0x1b [...] = DPL 0, pres 1, long 1, def32 0, gran 1 [...] processor eflags = interrupt enabled, resume, IOPL = 0 [...] current process = 9 (dom0) [...] rdi: fffffe0018291828 rsi: 0000000000000000 rdx: 0000000000000033 [...] rcx: 0000000000000001 r8: 0000000000000000 r9: 0000000000000000 [...] rax: 0000000000000001 rbx: fffffa0050b1cb58 rbp: ffffffff82cb5af0 [...] r10: 0000000000000100 r11: 000000000000003e r12: fffffe0018291890 [...] r13: 0000000000000000 r14: ffffffff81c1ac00 r15: fffff8000604b740 [...] trap number = 12 [...] panic: page fault [...] cpuid = 3 [...] time = 1745586124 [...] KDB: stack backtrace: [...] db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff82cb5270 [...] vpanic() at vpanic+0x131/frame 0xffffffff82cb53a0 [...] panic() at panic+0x43/frame 0xffffffff82cb5400 [...] trap_fatal() at trap_fatal+0x40b/frame 0xffffffff82cb5460 [...] trap_pfault() at trap_pfault+0x46/frame 0xffffffff82cb54b0 [...] calltrap() at calltrap+0x8/frame 0xffffffff82cb54b0 [...] --- trap 0xc, rip = 0xffffffff80f797e3, rsp = 0xffffffff82cb5580, rbp = 0xffffffff82cb5af0 --- [...] vm_pageout_scan_inactive() at vm_pageout_scan_inactive+0x353/frame 0xffffffff82cb5af0 [...] vm_pageout_worker() at vm_pageout_worker+0x574/frame 0xffffffff82cb5eb0 [...] vm_pageout() at vm_pageout+0x1d7/frame 0xffffffff82cb5ef0 [...] fork_exit() at fork_exit+0x7f/frame 0xffffffff82cb5f30 [...] fork_trampoline() at fork_trampoline+0xe/frame 0xffffffff82cb5f30 [...] --- trap 0, rip = 0, rsp = 0, rbp = 0 --- [...] KDB: enter: panic [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x12 to 0x21 [...] CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (3503.58-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16580886528 (15812 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 5 7 4 6 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0a) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7520000-0xf752ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579V> port 0xf040-0xf05f mem 0xf7500000-0xf751ffff,0xf7539000-0xf7539fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.15-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7538000-0xf75383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xf7530000-0xf7533fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xf7410000-0xf74101ff irq 17 at device 0.0 on pci3 [...] ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahci0: quirks=0x1000000<IOMMU_BUSWIDE> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <serial bus, FireWire> at device 1.0 (no driver attached) [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8161 PCIe Gigabit Ethernet> port 0xb000-0xb07f mem 0xf7200000-0xf723ffff irq 18 at device 0.0 on pci6 [...] alc0: 11776 Tx FIFO, 12032 Rx FIFO [...] alc0: Using 1 MSIX message(s). [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci1: <Marvell 88SE9172 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xf7110000-0xf71101ff irq 19 at device 0.0 on pci7 [...] ahci1: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahci1: quirks=0x1000000<IOMMU_BUSWIDE> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7537000-0xf75373ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci2: <Intel Panther Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7536000-0xf75367ff irq 19 at device 31.2 on pci0 [...] ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] ahciem0: <AHCI enclosure management bridge> on ahci2 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1751723060 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0040) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0040) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC899 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC899 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC899 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALC899 (Onboard Digital)> at nid 17 on hdaa1 [...] pcm7: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa1 [...] ada0 at ahcich5 bus 0 scbus4 target 0 lun 0 [...] ada0: <OCZ-AGILITY3 2.22> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus4 target 0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] WARNING: / was not properly dismounted [...] WARNING: /: mount pending error: blocks 48 files 0 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_STALLED, port 7, addr 2 (ignored) [...] ugen0.2: <VIA Labs, Inc. 4-Port USB 3.0 Hub> at usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Dell Dell USB Keyboard Hub> at usbus1 [...] uhub5 on uhub4 [...] uhub5: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus1 [...] uhub5: 3 ports with 2 removable, bus powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored)