[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU microcode: updated from 0x8a to 0xf0 [...] [1] CPU: Intel(R) Celeron(R) CPU G3900 @ 2.80GHz (2800.00-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x2942607<FSGSBASE,TSCADJ,SGX,ERMS,INVPCID,NFPUSG,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] [1] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0xc04<RSBA> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8134373376 (7757 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] vtvga0: <VT VGA driver> [...] [1] smbios0: <System Management BIOS> at iomem 0xf0600-0xf0617 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] [1] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdfc10000-0xdfc1ffff irq 16 at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0: waiting for BIOS to give up control [...] [1] xhci_interrupt: host controller halted [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdfc28000-0xdfc29fff,0xdfc2c000-0xdfc2c0ff,0xdfc2b000-0xdfc2b7ff irq 16 at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] [1] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb23fff irq 16 at device 0.0 on pci2 [...] [1] igb0: NVM V0.6 imgtype2 [...] [1] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb0: Using 2 RX queues 2 TX queues [...] [1] igb0: Using MSI-X interrupts with 3 vectors [...] [1] igb0: Ethernet address: ... [...] [1] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 17 at device 0.0 on pci3 [...] [1] igb1: NVM V0.6 imgtype2 [...] [1] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb1: Using 2 RX queues 2 TX queues [...] [1] igb1: Using MSI-X interrupts with 3 vectors [...] [1] igb1: Ethernet address: ... [...] [1] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 18 at device 0.0 on pci4 [...] [1] igb2: NVM V0.6 imgtype2 [...] [1] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb2: Using 2 RX queues 2 TX queues [...] [1] igb2: Using MSI-X interrupts with 3 vectors [...] [1] igb2: Ethernet address: ... [...] [1] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf800000-0xdf81ffff,0xdf820000-0xdf823fff irq 19 at device 0.0 on pci5 [...] [1] igb3: NVM V0.6 imgtype2 [...] [1] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb3: Using 2 RX queues 2 TX queues [...] [1] igb3: Using MSI-X interrupts with 3 vectors [...] [1] igb3: Ethernet address: ... [...] [1] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 16 at device 0.0 on pci6 [...] [1] igb4: NVM V0.6 imgtype2 [...] [1] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb4: Using 2 RX queues 2 TX queues [...] [1] igb4: Using MSI-X interrupts with 3 vectors [...] [1] igb4: Ethernet address: ... [...] [1] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] [1] pci7: <ACPI PCI bus> on pcib7 [...] [1] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] [1] pci8: <ACPI PCI bus> on pcib8 [...] [1] pcib9: <PCI-PCI bridge> at device 1.0 on pci8 [...] [1] pci9: <PCI bus> on pcib9 [...] [1] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 18 at device 0.0 on pci9 [...] [1] igb5: NVM V0.6 imgtype2 [...] [1] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb5: Using 2 RX queues 2 TX queues [...] [1] igb5: Using MSI-X interrupts with 3 vectors [...] [1] igb5: Ethernet address: ... [...] [1] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] [1] pci10: <PCI bus> on pcib10 [...] [1] igb6: <Intel(R) I210 (Fiber)> port 0x8000-0x801f mem 0xdf400000-0xdf4fffff,0xdf500000-0xdf503fff irq 19 at device 0.0 on pci10 [...] [1] igb6: EEPROM V3.25-0 eTrack 0x800005d5 [...] [1] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb6: Using 2 RX queues 2 TX queues [...] [1] igb6: Using MSI-X interrupts with 3 vectors [...] [1] igb6: Ethernet address: ... [...] [1] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] pcib11: <PCI-PCI bridge> at device 3.0 on pci8 [...] [1] pci11: <PCI bus> on pcib11 [...] [1] igb7: <Intel(R) I210 (Fiber)> port 0x7000-0x701f mem 0xdf100000-0xdf1fffff,0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] [1] igb7: EEPROM V3.25-0 eTrack 0x800005d5 [...] [1] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igb7: Using 2 RX queues 2 TX queues [...] [1] igb7: Using MSI-X interrupts with 3 vectors [...] [1] igb7: Ethernet address: ... [...] [1] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] pci0: <memory> at device 31.2 (no driver attached) [...] [1] hdac0: <Intel Sunrise Point HDA Controller> mem 0xdfc20000-0xdfc23fff,0xdfc00000-0xdfc0ffff irq 16 at device 31.3 on pci0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_tz1: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] Timecounter "TSC-low" frequency 1403997199 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] hdacc0: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] [1] hdaa0: <Intel Skylake Audio Function Group> at nid 1 on hdacc0 [...] [1] pcm0: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] [1] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ASU800SS-128GT R0821A1S> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] uhub0: 20 ports with 20 removable, self powered [...] [3] Root mount waiting for: usbus0 [...] [3] ugen0.2: <American Power Conversion Back-UPS XS 1500G FW:866.L8 .D USB FW:L8> at usbus0