[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (2394.63-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179511296 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c13000-0xf7c133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci4 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 19 at device 0.0 on pci5 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em4: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci6 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xf7600000-0xf761ffff,0xf7620000-0xf7623fff irq 17 at device 0.0 on pci7 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xf7500000-0xf751ffff,0xf7520000-0xf7523fff irq 18 at device 0.0 on pci8 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] em7: <Intel(R) Gigabit CT 82574L> port 0x7000-0x701f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 19 at device 0.0 on pci9 [...] em7: EEPROM V2.1-0 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c12000-0xf7c123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Panther Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8a00001300 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8a00001300 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b6100001300 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8a00001300 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1197280050 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] ugen0.5: <SMI Corporation USB DISK> at usbus0 [...] umass0 on uhub0 [...] umass0: <SMI Corporation USB DISK, class 0/0, rev 3.10/11.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:4:0: Attached to scbus4 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <IND-S3MP/256G SBFCBBT3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 244198MB (500118192 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <SMI USB DISK 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 30000MB (61440000 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7c11000-0xf7c110ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub3 [...] uhid0: <USB Keyboard> on usbus0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (2394.64-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179494912 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c13000-0xf7c133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci4 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 19 at device 0.0 on pci5 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em4: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci6 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xf7600000-0xf761ffff,0xf7620000-0xf7623fff irq 17 at device 0.0 on pci7 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xf7500000-0xf751ffff,0xf7520000-0xf7523fff irq 18 at device 0.0 on pci8 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] em7: <Intel(R) Gigabit CT 82574L> port 0x7000-0x701f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 19 at device 0.0 on pci9 [...] em7: EEPROM V2.1-0 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c12000-0xf7c123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Panther Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b0f00001300 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1197280052 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: 8 ports with 8 removable, self powered [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <IND-S3MP/256G SBFCBBT3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 244198MB (500118192 512 byte sectors) [...] Root mount waiting for: ada [...] em0: link state changed to UP [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7c11000-0xf7c110ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub3 [...] uhid0: <USB Keyboard> on usbus0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (2394.68-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179494912 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f13000-0xf7f133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 17 at device 0.0 on pci3 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 18 at device 0.0 on pci4 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 19 at device 0.0 on pci5 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 16 at device 0.0 on pci6 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em4: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 17 at device 0.0 on pci7 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci8 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 19 at device 0.0 on pci9 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f12000-0xf7f123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Panther Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b0f00001300 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1197280149 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 8 ports with 8 removable, self powered [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <IND-S3MP/256G SBFCBBT3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 244198MB (500118192 512 byte sectors) [...] Root mount waiting for: ada [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7f11000-0xf7f110ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub3 [...] uhid0: <USB Keyboard> on usbus0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (2394.71-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179494912 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c13000-0xf7c133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci4 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 19 at device 0.0 on pci5 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em4: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci6 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xf7600000-0xf761ffff,0xf7620000-0xf7623fff irq 17 at device 0.0 on pci7 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xf7500000-0xf751ffff,0xf7520000-0xf7523fff irq 18 at device 0.0 on pci8 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] em7: <Intel(R) Gigabit CT 82574L> port 0x7000-0x701f mem 0xf7400000-0xf741ffff,0xf7420000-0xf7423fff irq 19 at device 0.0 on pci9 [...] em7: EEPROM V2.1-0 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c12000-0xf7c123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Panther Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ae600001300 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1197279990 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <IND-S3MP/256G SBFCBBT3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 244198MB (500118192 512 byte sectors) [...] Root mount waiting for: ada [...] em0: link state changed to UP [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7c11000-0xf7c110ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub3 [...] uhid0: <USB Keyboard> on usbus0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 42 42 fsync: giving up on dirty (error = 35) 0xfffff800025aed58: type VCHR [...] usecount 1, writecount 0, refcount 243 seqc users 0 rdev 0xfffff800025c4400 [...] hold count flags () [...] flags () [...] v_object 0xfffff800016e4c60 ref 0 pages 15467 cleanbuf 240 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe008d9893a0 (pid 19, syncer, tid 100107) [...] 41 2 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (2394.66-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179494912 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7f13000-0xf7f133ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 17 at device 0.0 on pci3 [...] em0: EEPROM V2.1-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 18 at device 0.0 on pci4 [...] em1: EEPROM V2.1-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 19 at device 0.0 on pci5 [...] em2: EEPROM V2.1-0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 16 at device 0.0 on pci6 [...] em3: EEPROM V2.1-0 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em4: <Intel(R) Gigabit CT 82574L> port 0xa000-0xa01f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 17 at device 0.0 on pci7 [...] em4: EEPROM V2.1-0 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] em5: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 18 at device 0.0 on pci8 [...] em5: EEPROM V2.1-0 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] em6: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 19 at device 0.0 on pci9 [...] em6: EEPROM V2.1-0 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7f12000-0xf7f123ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Panther Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1abd00001300 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a9400001300 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1abd00001300 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1a9400001300 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1197280554 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 8 ports with 8 removable, self powered [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.3: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <IND-S3MP/256G SBFCBBT3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 244198MB (500118192 512 byte sectors) [...] Root mount waiting for: ada