[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.50-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33271107584 (31729 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3e000-0xf7e3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3d000-0xf7e3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e3c000-0xf7e3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe020-0xe03f mem 0xf7da0000-0xf7dbffff,0xf7d80000-0xf7d9ffff irq 19 at device 0.0 on pci4 [...] em1: EEPROM V5.12-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em2: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe000-0xe01f mem 0xf7d40000-0xf7d5ffff,0xf7d20000-0xf7d3ffff irq 18 at device 0.1 on pci4 [...] em2: EEPROM V5.12-2 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] em3: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd020-0xd03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci5 [...] em3: EEPROM V5.12-2 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em4: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd000-0xd01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 16 at device 0.1 on pci5 [...] em4: EEPROM V5.12-2 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e3b000-0xf7e3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1646188663 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1 [...] pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7LM240HMHQ-00005 GXT5204Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub0: 21 ports with 21 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] ugen0.2: <USB IO Module> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Kb> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 [...] em0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff80001b85000), ignoring. [...] em4: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em4 (ifp 0xfffff80001b87000), ignoring. [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7e39000-0xf7e390ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <USB IO Module, class 0/0, rev 1.10/1.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em4: link state changed to DOWN [...] em4: link state changed to UP [...] em4: link state changed to DOWN [...] em4: link state changed to UP [...] em1: link state changed to UP [...] em4: link state changed to DOWN [...] em4: link state changed to UP [...] em4: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] All buffers synced. [...] Uptime: 20m47s [...] uhub3: detached [...] uhub1: detached [...] uhub4: detached [...] uhub2: detached [...] ukbd0: detached [...] ums0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.59-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33271107584 (31729 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7e34000-0xf7e37fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3e000-0xf7e3efff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) I217-LM LPT> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e3d000-0xf7e3dfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e3c000-0xf7e3c3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 2.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe020-0xe03f mem 0xf7da0000-0xf7dbffff,0xf7d80000-0xf7d9ffff irq 19 at device 0.0 on pci4 [...] em1: EEPROM V5.12-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em2: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xe000-0xe01f mem 0xf7d40000-0xf7d5ffff,0xf7d20000-0xf7d3ffff irq 18 at device 0.1 on pci4 [...] em2: EEPROM V5.12-2 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib5: <PCI-PCI bridge> at device 4.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] em3: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd020-0xd03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci5 [...] em3: EEPROM V5.12-2 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using an MSI interrupt [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em4: <Intel(R) PRO/1000 PT 82571EB/82571GB (Quad Copper)> port 0xd000-0xd01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 16 at device 0.1 on pci5 [...] em4: EEPROM V5.12-2 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using an MSI interrupt [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e3b000-0xf7e3b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e3a000-0xf7e3a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1646189459 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1 [...] pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7LM240HMHQ-00005 GXT5204Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub1: 21 ports with 21 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <USB IO Module> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Kb> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 [...] uhub3: 8 ports with 8 removable, self powered