[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz (3600.18-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12176859136 (11612 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 5 7 3 4 6 [...] Timecounter "TSC-low" frequency 1800089457 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1300000-0xd13fffff,0xd160c000-0xd160ffff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1200000-0xd12fffff,0xd1608000-0xd160bfff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1100000-0xd11fffff,0xd1604000-0xd1607fff at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1000000-0xd10fffff,0xd1600000-0xd1603fff at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd1910000-0xd191ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xd1928000-0xd1929fff,0xd192c000-0xd192c0ff,0xd192b000-0xd192b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xd1804000-0xd1804fff,0xd1800000-0xd1803fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel (0xa3f0) HDA Controller> mem 0xd1920000-0xd1923fff,0xd1900000-0xd190ffff at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC256 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418AS CC37> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 24 ports with 24 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0a2a> at usbus0 [...] ugen0.3: <LiteOn Lenovo Calliope USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x192f USB Optical Mouse> at usbus0 [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xd1700000-0xd1701fff at device 0.0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0a2a, class 224/1, rev 2.00/0.01, addr 1> on usbus0 [...] uhid0 on uhub0 [...] uhid0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZT] coordinates ID=0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb2: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] All buffers synced. [...] Uptime: 19m22s [...] ubt0: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz (3600.18-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12176859136 (11612 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 5 7 3 4 6 [...] Timecounter "TSC-low" frequency 1800089279 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1300000-0xd13fffff,0xd160c000-0xd160ffff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1200000-0xd12fffff,0xd1608000-0xd160bfff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1100000-0xd11fffff,0xd1604000-0xd1607fff at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1000000-0xd10fffff,0xd1600000-0xd1603fff at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd1910000-0xd191ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xd1928000-0xd1929fff,0xd192c000-0xd192c0ff,0xd192b000-0xd192b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xd1804000-0xd1804fff,0xd1800000-0xd1803fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel (0xa3f0) HDA Controller> mem 0xd1920000-0xd1923fff,0xd1900000-0xd190ffff at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC256 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418AS CC37> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 24 ports with 24 removable, self powered [...] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] ugen0.2: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.2: <LiteOn Lenovo Calliope USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <vendor 0x192f USB Optical Mouse> at usbus0 [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xd1700000-0xd1701fff at device 0.0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] uhid0 on uhub0 [...] uhid0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZT] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb2: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb3: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb3: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] igb3: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb3: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] All buffers synced. [...] Uptime: 57m16s [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p15-HBSD #0 5ee0fd2f334(stable/21.1)-dirty: Fri Mar 26 08:58:41 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz (3600.18-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12176859136 (11612 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 5 7 3 2 4 6 [...] Timecounter "TSC-low" frequency 1800088695 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000058 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1300000-0xd13fffff,0xd160c000-0xd160ffff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1200000-0xd12fffff,0xd1608000-0xd160bfff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1100000-0xd11fffff,0xd1604000-0xd1607fff at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd1000000-0xd10fffff,0xd1600000-0xd1603fff at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd1910000-0xd191ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xd1928000-0xd1929fff,0xd192c000-0xd192c0ff,0xd192b000-0xd192b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0x3000-0x30ff mem 0xd1804000-0xd1804fff,0xd1800000-0xd1803fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel (0xa3f0) HDA Controller> mem 0xd1920000-0xd1923fff,0xd1900000-0xd190ffff at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC256 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418AS CC37> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 24 ports with 24 removable, self powered [...] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT [...] ugen0.2: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.2: <LiteOn Lenovo Calliope USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <vendor 0x192f USB Optical Mouse> at usbus0 [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xd1700000-0xd1701fff at device 0.0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] uhid0 on uhub0 [...] uhid0: <LiteOn Lenovo Calliope USB Keyboard, class 0/0, rev 2.00/1.14, addr 2> on usbus0 [...] ums0 on uhub0 [...] ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0 [...] ums0: 3 buttons and [XYZT] coordinates ID=0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb2: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] igb3: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb3: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb2