[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD EPYC 7601 32-Core Processor (2195.99-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f12 Family=0x17 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 137438953472 (131072 MB) [...] avail memory = 133420855296 (127240 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 128 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 groups x 2 cache groups x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0: MADT APIC ID 128 != hw id 0 [...] ioapic1: MADT APIC ID 129 != hw id 0 [...] ioapic2: MADT APIC ID 130 != hw id 0 [...] ioapic3: MADT APIC ID 131 != hw id 0 [...] ioapic4: MADT APIC ID 132 != hw id 0 [...] ioapic5: MADT APIC ID 133 != hw id 0 [...] ioapic6: MADT APIC ID 134 != hw id 0 [...] ioapic7: MADT APIC ID 135 != hw id 0 [...] ioapic8: MADT APIC ID 136 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] ioapic2 <Version 2.1> irqs 56-87 [...] ioapic3 <Version 2.1> irqs 88-119 [...] ioapic4 <Version 2.1> irqs 120-151 [...] ioapic5 <Version 2.1> irqs 152-183 [...] ioapic6 <Version 2.1> irqs 184-215 [...] ioapic7 <Version 2.1> irqs 216-247 [...] ioapic8 <Version 2.1> irqs 248-279 [...] Launching APs: 29 27 28 24 26 25 31 8 10 12 11 13 9 14 6 15 2 5 3 4 1 7 30 19 16 21 18 20 22 17 23 53 48 51 49 52 54 50 55 61 58 56 59 60 63 57 62 33 36 32 35 37 38 34 39 46 41 47 44 40 43 45 42 101 98 97 100 96 99 102 104 108 106 109 105 110 107 111 103 125 121 124 120 122 126 123 127 116 113 114 112 115 119 117 118 90 92 89 91 93 88 95 87 83 80 86 82 81 84 94 85 75 73 76 72 77 79 74 78 67 69 64 66 65 68 71 70 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed001ff on acpi0 [...] hpet0: memory region width 512 too small [...] device_attach: hpet0 attach returned 6 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfa100000-0xfa1fffff,0xfa20c000-0xfa20ffff at device 0.0 numa-domain 0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V20-b5-p13 eTrack 0x80001103 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfa000000-0xfa0fffff,0xfa208000-0xfa20bfff at device 0.1 numa-domain 0 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V20-b5-p13 eTrack 0x80001103 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf9f00000-0xf9ffffff,0xfa204000-0xfa207fff at device 0.2 numa-domain 0 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V20-b5-p13 eTrack 0x80001103 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf9e00000-0xf9efffff,0xfa200000-0xfa203fff at device 0.3 numa-domain 0 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V20-b5-p13 eTrack 0x80001103 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2 [...] pci3: <PCI bus> numa-domain 0 on pcib3 [...] vgapci0: <VGA-compatible display> mem 0xeb000000-0xebffffff,0xf9808000-0xf980bfff,0xf9000000-0xf97fffff at device 0.0 numa-domain 0 on pci3 [...] vgapci0: Boot video device [...] pcib4: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pci4: <unknown> at device 0.0 (no driver attached) [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf9b00000-0xf9bfffff at device 0.3 numa-domain 0 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] pci5: <encrypt/decrypt> at device 0.1 (no driver attached) [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xf9a02000-0xf9a02fff at device 0.2 numa-domain 0 on pci5 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] isab0: <PCI-ISA bridge> at device 20.3 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pcib6: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci6: <ACPI PCI bus> numa-domain 1 on pcib6 [...] pci6: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci6 [...] pci7: <ACPI PCI bus> numa-domain 1 on pcib7 [...] pci7: <network, ethernet> at device 0.0 (no driver attached) [...] pci7: <network, ethernet> at device 0.1 (no driver attached) [...] pcib8: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 1 on pci6 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pci8: <unknown> at device 0.0 (no driver attached) [...] pci8: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xe8200000-0xe82fffff at device 0.3 numa-domain 1 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 numa-domain 1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib9: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 1 on pci6 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] pci9: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib10: <ACPI Host-PCI bridge> numa-domain 2 on acpi0 [...] pci10: <ACPI PCI bus> numa-domain 2 on pcib10 [...] pci10: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 2 on pci10 [...] pci11: <ACPI PCI bus> numa-domain 2 on pcib11 [...] pci11: <network, ethernet> at device 0.0 (no driver attached) [...] pci11: <network, ethernet> at device 0.1 (no driver attached) [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 2 on pci10 [...] pci12: <ACPI PCI bus> numa-domain 2 on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pci12: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 2 on pci10 [...] pci13: <ACPI PCI bus> numa-domain 2 on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] pci13: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib14: <ACPI Host-PCI bridge> numa-domain 3 on acpi0 [...] pci14: <ACPI PCI bus> numa-domain 3 on pcib14 [...] pci14: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib15: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 3 on pci14 [...] pci15: <ACPI PCI bus> numa-domain 3 on pcib15 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mrsas0: <AVAGO Harpoon SAS Controller> port 0x6000-0x60ff mem 0xc9000000-0xc90fffff,0xc9100000-0xc91fffff,0xce400000-0xce4fffff at device 0.0 numa-domain 3 on pci15 [...] mrsas0: FW now in Ready state [...] mrsas0: Using MSI-X with 128 number of vectors [...] mrsas0: FW supports <128> MSIX vector,Online CPU 128 Current MSIX <128> [...] mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1fe0,sc->request_alloc_sz 0x7f60, sc->reply_alloc_sz 0xff00,sc->io_frames_alloc_sz 0xfee00 [...] mrsas0: max sge: 0x106, max chain frame size: 0x1000, max fw cmd: 0xfec sc->chain_frames_alloc_sz: 0xfec000 [...] mrsas0: Issuing IOC INIT command to FW. [...] mrsas0: IOC INIT response received from FW. [...] mrsas0: NVME page size : (4096) [...] mrsas0: FW supports JBOD Map [...] mrsas0: FW supports JBOD Map Ext [...] mrsas0: Jbod map is supported [...] mrsas0: VD created target ID: 0x0 [...] mrsas0: FW supports: UnevenSpanSupport=1 [...] [...] mrsas0: max_fw_cmds: 4076 max_scsi_cmds: 4060 [...] mrsas0: MSI-x interrupts setup success [...] mrsas0: mrsas_ocr_thread [...] pcib16: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 3 on pci14 [...] pci16: <ACPI PCI bus> numa-domain 3 on pcib16 [...] pci16: <network, ethernet> at device 0.0 (no driver attached) [...] pci16: <network, ethernet> at device 0.1 (no driver attached) [...] pcib17: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 3 on pci14 [...] pci17: <ACPI PCI bus> numa-domain 3 on pcib17 [...] pci17: <unknown> at device 0.0 (no driver attached) [...] pci17: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib18: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 3 on pci14 [...] pci18: <ACPI PCI bus> numa-domain 3 on pcib18 [...] pci18: <unknown> at device 0.0 (no driver attached) [...] pci18: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib19: <ACPI Host-PCI bridge> numa-domain 4 on acpi0 [...] pci19: <ACPI PCI bus> numa-domain 4 on pcib19 [...] pci19: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib20: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 4 on pci19 [...] pci20: <ACPI PCI bus> numa-domain 4 on pcib20 [...] ice0: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 0.28.1-k> mem 0xba000000-0xbbffffff,0xbe010000-0xbe01ffff at device 0.0 numa-domain 4 on pci20 [...] ice0: Loading the iflib ice driver [...] ice0: The DDP package module (ice_ddp) failed to load or could not be found. Entering Safe Mode. [...] ice0: The DDP package module cannot be automatically loaded while booting. You may want to specify ice_ddp_load="YES" in your loader.conf [...] ice0: fw 5.5.6 api 1.7 nvm 2.50 etid 800077a6 netlist 2.50.2000-3.1d.0.8d99cfcd oem 1.2960.0 [...] ice0: Using 1 Tx and Rx queues [...] ice0: Using MSI-X interrupts with 2 vectors [...] ice0: Using 1024 TX descriptors and 1024 RX descriptors [...] ice0: Ethernet address: ... [...] ice0: PCI Express Bus: Speed 8.0GT/s Width x16 [...] ice0: Firmware LLDP agent disabled [...] ice0: link state changed to UP [...] ice0: Link is up, 100 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None [...] ice0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ice1: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 0.28.1-k> mem 0xb8000000-0xb9ffffff,0xbe000000-0xbe00ffff at device 0.1 numa-domain 4 on pci20 [...] ice1: Loading the iflib ice driver [...] ice1: The DDP package module (ice_ddp) failed to load or could not be found. Entering Safe Mode. [...] ice1: The DDP package module cannot be automatically loaded while booting. You may want to specify ice_ddp_load="YES" in your loader.conf [...] ice1: fw 5.5.6 api 1.7 nvm 2.50 etid 800077a6 netlist 2.50.2000-3.1d.0.8d99cfcd oem 1.2960.0 [...] ice1: Using 1 Tx and Rx queues [...] ice1: Using MSI-X interrupts with 2 vectors [...] ice1: Using 1024 TX descriptors and 1024 RX descriptors [...] ice1: Ethernet address: ... [...] ice1: PCI Express Bus: Speed 8.0GT/s Width x16 [...] ice1: Firmware LLDP agent disabled [...] ice1: link state changed to UP [...] ice1: Link is up, 100 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None [...] ice1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ice1: link state changed to DOWN [...] pcib21: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 4 on pci19 [...] pci21: <ACPI PCI bus> numa-domain 4 on pcib21 [...] pci21: <unknown> at device 0.0 (no driver attached) [...] pci21: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib22: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 4 on pci19 [...] pci22: <ACPI PCI bus> numa-domain 4 on pcib22 [...] pci22: <unknown> at device 0.0 (no driver attached) [...] pci22: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib23: <ACPI Host-PCI bridge> numa-domain 5 on acpi0 [...] pci23: <ACPI PCI bus> numa-domain 5 on pcib23 [...] pci23: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib24: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 5 on pci23 [...] pci24: <ACPI PCI bus> numa-domain 5 on pcib24 [...] ice2: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 0.28.1-k> mem 0xac000000-0xadffffff,0xb0010000-0xb001ffff at device 0.0 numa-domain 5 on pci24 [...] ice2: Loading the iflib ice driver [...] ice2: The DDP package module (ice_ddp) failed to load or could not be found. Entering Safe Mode. [...] ice1: link state changed to UP [...] ice1: Link is up, 100 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None [...] ice2: The DDP package module cannot be automatically loaded while booting. You may want to specify ice_ddp_load="YES" in your loader.conf [...] ice2: fw 5.5.6 api 1.7 nvm 2.50 etid 800077a6 netlist 2.50.2000-3.1d.0.8d99cfcd oem 1.2960.0 [...] ice2: Using 1 Tx and Rx queues [...] ice2: Using MSI-X interrupts with 2 vectors [...] ice2: Using 1024 TX descriptors and 1024 RX descriptors [...] ice2: Ethernet address: ... [...] ice2: PCI Express Bus: Speed 8.0GT/s Width x16 [...] ice2: Firmware LLDP agent disabled [...] ice2: link state changed to UP [...] ice2: Link is up, 100 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None [...] ice2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ice3: <Intel(R) Ethernet Network Adapter E810-C-Q2 - 0.28.1-k> mem 0xaa000000-0xabffffff,0xb0000000-0xb000ffff at device 0.1 numa-domain 5 on pci24 [...] ice3: Loading the iflib ice driver [...] ice3: The DDP package module (ice_ddp) failed to load or could not be found. Entering Safe Mode. [...] ice3: The DDP package module cannot be automatically loaded while booting. You may want to specify ice_ddp_load="YES" in your loader.conf [...] ice3: fw 5.5.6 api 1.7 nvm 2.50 etid 800077a6 netlist 2.50.2000-3.1d.0.8d99cfcd oem 1.2960.0 [...] ice3: Using 1 Tx and Rx queues [...] ice3: Using MSI-X interrupts with 2 vectors [...] ice3: Using 1024 TX descriptors and 1024 RX descriptors [...] ice3: Ethernet address: ... [...] ice3: PCI Express Bus: Speed 8.0GT/s Width x16 [...] ice3: Firmware LLDP agent disabled [...] ice3: link state changed to UP [...] ice3: Link is up, 100 Gbps Full Duplex, Requested FEC: RS-FEC, Negotiated FEC: RS-FEC, Autoneg: False, Flow Control: None [...] ice3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib25: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 5 on pci23 [...] pci25: <ACPI PCI bus> numa-domain 5 on pcib25 [...] pci25: <unknown> at device 0.0 (no driver attached) [...] pci25: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib26: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 5 on pci23 [...] pci26: <ACPI PCI bus> numa-domain 5 on pcib26 [...] pci26: <unknown> at device 0.0 (no driver attached) [...] pci26: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib27: <ACPI Host-PCI bridge> numa-domain 6 on acpi0 [...] pci27: <ACPI PCI bus> numa-domain 6 on pcib27 [...] pci27: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib28: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 6 on pci27 [...] pci28: <ACPI PCI bus> numa-domain 6 on pcib28 [...] ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xc028-0xc02f,0xc034-0xc037,0xc020-0xc027,0xc030-0xc033,0xc000-0xc01f mem 0xa7400000-0xa74007ff at device 0.0 numa-domain 6 on pci28 [...] ahci1: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported [...] ahci1: quirks=0x1000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE> [...] ahcich1: <AHCI channel> at channel 0 on ahci1 [...] ahcich2: <AHCI channel> at channel 1 on ahci1 [...] ahcich3: <AHCI channel> at channel 2 on ahci1 [...] pcib29: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 6 on pci27 [...] pci29: <ACPI PCI bus> numa-domain 6 on pcib29 [...] pci29: <unknown> at device 0.0 (no driver attached) [...] pci29: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib30: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 6 on pci27 [...] pci30: <ACPI PCI bus> numa-domain 6 on pcib30 [...] pci30: <unknown> at device 0.0 (no driver attached) [...] pci30: <encrypt/decrypt> at device 0.1 (no driver attached) [...] pcib31: <ACPI Host-PCI bridge> numa-domain 7 on acpi0 [...] pci31: <ACPI PCI bus> numa-domain 7 on pcib31 [...] pci31: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib32: <ACPI PCI-PCI bridge> at device 7.1 numa-domain 7 on pci31 [...] pci32: <ACPI PCI bus> numa-domain 7 on pcib32 [...] pci32: <unknown> at device 0.0 (no driver attached) [...] pci32: <encrypt/decrypt> at device 0.2 (no driver attached) [...] pcib33: <ACPI PCI-PCI bridge> at device 8.1 numa-domain 7 on pci31 [...] pci33: <ACPI PCI bus> numa-domain 7 on pcib33 [...] pci33: <unknown> at device 0.0 (no driver attached) [...] pci33: <encrypt/decrypt> at device 0.1 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff pnpid PNP0900 on isa0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1097938432 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] mrsas0: Disestablish mrsas intr hook [...] mlx5_core0: <mlx5_core> mem 0xe0000000-0xe1ffffff at device 0.0 numa-domain 1 on pci7 [...] mlx5: Mellanox Core driver 3.7.0 (July 2021)uhub0 numa-domain 0 on usbus0 [...] uhub1 numa-domain 1 on usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] mlx5_core0: INFO: mlx5_port_module_event:711:(pid 12): Module 0, status: unplugged [...] ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] ahcich1: stopping AHCI engine failed [...] ahcich1: stopping AHCI engine failed [...] uhub2: 4 ports with 4 removable, self powered [...] mlx5_core: INFO: (mlx5_core0): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core1: <mlx5_core> mem 0xde000000-0xdfffffff at device 0.1 numa-domain 1 on pci7 [...] ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub3 numa-domain 0 on uhub2 [...] uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] mlx5_core1: INFO: mlx5_port_module_event:711:(pid 12): Module 1, status: unplugged [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.4: <Dell(TM) iDRAC Virtual NIC USB Device> at usbus0 [...] mlx5_core: INFO: (mlx5_core1): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core2: <mlx5_core> mem 0xd4000000-0xd5ffffff at device 0.0 numa-domain 2 on pci11 [...] ugen0.5: <vendor 0x1604 product 0x10c0> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] ahcich1: stopping AHCI engine failed [...] mlx5_core2: INFO: mlx5_port_module_event:706:(pid 12): Module 0, status: plugged and enabled [...] ahcich3: stopping AHCI engine failed [...] ahcich3: stopping AHCI engine failed [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.6: <Microchip Tech USB2734> at usbus0 [...] uhub5 numa-domain 0 on uhub0 [...] uhub5: <Microchip Tech USB2734, class 9/0, rev 2.10/1.21, addr 5> on usbus0 [...] uhub5: MTT enabled [...] mlx5_core: INFO: (mlx5_core2): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core3: <mlx5_core> mem 0xd2000000-0xd3ffffff at device 0.1 numa-domain 2 on pci11 [...] uhub5: 4 ports with 4 removable, self powered [...] mlx5_core3: INFO: mlx5_port_module_event:711:(pid 12): Module 1, status: unplugged [...] ugen0.7: <Microchip Tech USB5734> at usbus0 [...] uhub6 numa-domain 0 on uhub0 [...] uhub6: <Microchip Tech USB5734, class 9/0, rev 3.00/1.21, addr 6> on usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] ahcich3: stopping AHCI engine failed [...] ada0 at ahcich1 bus 0 scbus3 target 0 lun 0 [...] ada0: <DELLBOSS VD MV.R00-0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228872MB (468731008 512 byte sectors) [...] pass2 at ahcich3 bus 0 scbus5 target 0 lun 0 [...] pass2: <Marvell Console 1.01> Removable Processor SCSI device [...] pass2: Serial Number... [...] pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] da0 at mrsas0 bus 0 scbus1 target 0 lun 0 [...] da0: <DELL PERC H740P Adp 5.16> Fixed Direct Access SPC-3 SCSI device [...] da0: Serial Number... [...] da0: 150.000MB/s transfers [...] da0: 228352MB (467664896 512 byte sectors) [...] mlx5_core: INFO: (mlx5_core3): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core4: <mlx5_core> mem 0xc6000000-0xc7ffffff at device 0.0 numa-domain 3 on pci16 [...] mlx5_core4: INFO: mlx5_port_module_event:706:(pid 12): Module 0, status: plugged and enabled [...] mlx5_core: INFO: (mlx5_core4): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core5: <mlx5_core> mem 0xc4000000-0xc5ffffff at device 0.1 numa-domain 3 on pci16 [...] mlx5_core5: INFO: mlx5_port_module_event:711:(pid 12): Module 1, status: unplugged [...] mlx5_core: INFO: (mlx5_core5): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mce0: Ethernet address: ... [...] mce0: link state changed to DOWN [...] mce1: Ethernet address: ... [...] mce1: link state changed to DOWN [...] mce2: Ethernet address: ... [...] mce2: link state changed to DOWN [...] mce3: Ethernet address: ... [...] mce3: link state changed to DOWN [...] mce4: Ethernet address: ... [...] mce4: link state changed to DOWN [...] mce5: Ethernet address: ... [...] mce5: link state changed to DOWN [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...