[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) W-3245 CPU @ 3.20GHz (3200.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50657 Family=0x6 Model=0x55 Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x808<PKU,AVX512VNNI> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 103076069376 (98301 MB) [...] avail memory = 99909750784 (95281 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs [...] FreeBSD/SMP: 1 package(s) x 16 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-31 [...] ioapic2 <Version 2.0> irqs 32-39 [...] ioapic3 <Version 2.0> irqs 40-47 [...] ioapic4 <Version 2.0> irqs 48-55 [...] ioapic5 <Version 2.0> irqs 56-63 [...] Launching APs: 1 20 17 27 19 23 2 26 7 18 25 28 16 3 13 31 24 5 22 21 12 30 4 6 15 11 14 9 8 29 10 [...] Timecounter "TSC-low" frequency 1600047114 Hz quality 1000 [...] KTLS: Initialized 32 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000086 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <SUPERM SUPERM> [...] acpi0: Power Button (fixed) [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pci0: <dasp, performance counters> at device 8.1 (no driver attached) [...] pci0: <unknown> at device 17.0 (no driver attached) [...] pci0: <unknown> at device 17.1 (no driver attached) [...] xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xa5c80000-0xa5c8ffff irq 16 at device 20.0 numa-domain 0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <Intel Lewisburg AHCI SATA controller> port 0x840-0x847,0x850-0x853,0x860-0x87f mem 0xa5c94000-0xa5c95fff,0xa5c96000-0xa5c960ff,0xa5c00000-0xa5c7ffff irq 16 at device 23.0 numa-domain 0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xa5b00000-0xa5b07fff irq 16 at device 0.0 numa-domain 0 on pci1 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 numa-domain 0 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xa5a00000-0xa5a07fff irq 18 at device 0.0 numa-domain 0 on pci2 [...] xhci2: 32 bytes context size, 64-bit DMA [...] usbus2 numa-domain 0 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 numa-domain 0 on pci3 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa4000000-0xa4ffffff,0xa5000000-0xa501ffff irq 17 at device 0.0 numa-domain 0 on pci4 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0xa5900000-0xa597ffff,0xa5980000-0xa5983fff irq 18 at device 0.0 numa-domain 0 on pci5 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci6: <network, ethernet> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel (0xa1f0) HDA Controller> mem 0x383ffff10000-0x383ffff13fff,0x383ffff00000-0x383ffff0ffff irq 16 at device 31.3 numa-domain 0 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 39 at device 0.0 numa-domain 0 on pci7 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> mem 0xbb600000-0xbb63ffff irq 32 at device 0.0 numa-domain 0 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> irq 32 at device 8.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xbb500000-0xbb501fff irq 32 at device 0.0 numa-domain 0 on pci10 [...] xhci3: 64 bytes context size, 32-bit DMA [...] usbus3 numa-domain 0 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <PCI-PCI bridge> irq 36 at device 9.0 numa-domain 0 on pci9 [...] pcib12: <PCI-PCI bridge> irq 32 at device 16.0 numa-domain 0 on pci9 [...] pci11: <PCI bus> numa-domain 0 on pcib12 [...] pcib13: <PCI-PCI bridge> irq 36 at device 17.0 numa-domain 0 on pci9 [...] pci12: <PCI bus> numa-domain 0 on pcib13 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x6020-0x603f mem 0xbb200000-0xbb2fffff,0xbb404000-0xbb407fff irq 36 at device 0.0 numa-domain 0 on pci12 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x6000-0x601f mem 0xbb100000-0xbb1fffff,0xbb400000-0xbb403fff irq 37 at device 0.1 numa-domain 0 on pci12 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib14: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib14 [...] pcib15: <ACPI PCI-PCI bridge> irq 47 at device 0.0 numa-domain 0 on pci13 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib15 [...] vgapci1: <VGA-compatible display> port 0x9000-0x907f mem 0xcf000000-0xcfffffff,0x38bfe0000000-0x38bfefffffff,0x38bff0000000-0x38bff1ffffff irq 40 at device 0.0 numa-domain 0 on pci14 [...] hdac1: <NVIDIA (0x0fb9) HDA Controller> mem 0xd0080000-0xd0083fff irq 44 at device 0.1 numa-domain 0 on pci14 [...] pcib16: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 0 on pcib16 [...] pcib17: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci15 [...] pci16: <ACPI PCI bus> numa-domain 0 on pcib17 [...] nvme0: <Generic NVMe Device> mem 0xe6620000-0xe6623fff irq 48 at device 0.0 numa-domain 0 on pci16 [...] pcib18: <ACPI PCI-PCI bridge> irq 55 at device 1.0 numa-domain 0 on pci15 [...] pci17: <ACPI PCI bus> numa-domain 0 on pcib18 [...] nvme1: <Generic NVMe Device> mem 0xe6520000-0xe6523fff irq 49 at device 0.0 numa-domain 0 on pci17 [...] pcib19: <ACPI PCI-PCI bridge> irq 55 at device 2.0 numa-domain 0 on pci15 [...] pci18: <ACPI PCI bus> numa-domain 0 on pcib19 [...] nvme2: <Generic NVMe Device> mem 0xe6410000-0xe6413fff irq 50 at device 0.0 numa-domain 0 on pci18 [...] pcib20: <ACPI PCI-PCI bridge> irq 55 at device 3.0 numa-domain 0 on pci15 [...] pci19: <ACPI PCI bus> numa-domain 0 on pcib20 [...] nvme3: <Generic NVMe Device> mem 0xe6310000-0xe6313fff irq 51 at device 0.0 numa-domain 0 on pci19 [...] pci15: <dasp, performance counters> at device 14.0 (no driver attached) [...] pci15: <dasp, performance counters> at device 15.0 (no driver attached) [...] pci15: <dasp, performance counters> at device 16.0 (no driver attached) [...] pci15: <dasp, performance counters> at device 18.0 (no driver attached) [...] pci15: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 18.4 (no driver attached) [...] pci15: <dasp, performance counters> at device 18.5 (no driver attached) [...] pci15: <dasp, performance counters> at device 21.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 22.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 22.5 (no driver attached) [...] pci15: <dasp, performance counters> at device 23.1 (no driver attached) [...] pcib21: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci20: <ACPI PCI bus> numa-domain 0 on pcib21 [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart1: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC888 (Rear Analog 5.1/2.0)> at nid 20,22,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC888 (Internal Digital)> at nid 17 on hdaa0 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] pcm5: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm6: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm7: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen3.1: <0x1912 XHCI root HUB> at usbus3 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] uhub0 numa-domain 0 on usbus2 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 numa-domain 0 on usbus3 [...] uhub1: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub2 numa-domain 0 on usbus1 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub3 numa-domain 0 on usbus0 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Micron_7300_MTFDHBA400TDG> NVMe namespace [...] nvd0: 381554MB (781422768 512 byte sectors) [...] nvd1: <Micron_7300_MTFDHBA400TDG> NVMe namespace [...] nvd1: 381554MB (781422768 512 byte sectors) [...] nvd2: <SAMSUNG MZ1LB1T9HALS-00007> NVMe namespace [...] GEOM: nvd2: the primary GPT table is corrupt or invalid. [...] nvd2: 1831420MB (3750748848 512 byte sectors) [...] GEOM: nvd2: using the secondary instead -- recovery strongly advised. [...] nvd3: <SAMSUNG MZ1LB1T9HALS-00007> NVMe namespace [...] GEOM: nvd3: the primary GPT table is corrupt or invalid. [...] nvd3: 1831420MB (3750748848 512 byte sectors) [...] GEOM: nvd3: using the secondary instead -- recovery strongly advised. [...] ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 11444224MB (23437770752 512 byte sectors) [...] ses0: pass1 in 'Slot 03', SATA Slot: scbus3 target 0 [...] ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada1: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 11444224MB (23437770752 512 byte sectors) [...] Trying to mount root from zfs:zoroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub3: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/43.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd1 numa-domain 0 on uhub3 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.4: <vendor 0x0a12 product 0x0001> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <vendor 0x046d HD Webcam C525> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <EATON Eaton 9E> at usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.7: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 6> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 3 removable, self powered [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd2 numa-domain 0 on uhub4 [...] ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 7> on usbus0 [...] kbd4 at ukbd2 [...] Dual Console: Serial Primary, Video Secondary [...] ioat0: <SKX IOAT> mem 0x383ffff30000-0x383ffff33fff irq 26 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat1: <SKX IOAT> mem 0x383ffff2c000-0x383ffff2ffff irq 27 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat2: <SKX IOAT> mem 0x383ffff28000-0x383ffff2bfff irq 26 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat3: <SKX IOAT> mem 0x383ffff24000-0x383ffff27fff irq 27 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat4: <SKX IOAT> mem 0x383ffff20000-0x383ffff23fff irq 26 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat5: <SKX IOAT> mem 0x383ffff1c000-0x383ffff1ffff irq 27 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat6: <SKX IOAT> mem 0x383ffff18000-0x383ffff1bfff irq 26 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ioat7: <SKX IOAT> mem 0x383ffff14000-0x383ffff17fff irq 27 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break> [...] ichsmb0: <Intel Lewisburg SMBus controller> port 0x780-0x79f irq 16 at device 31.4 numa-domain 0 on pci0 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] nvidia1: <Quadro P620> numa-domain 0 on vgapci1 [...] vgapci1: child nvidia1 requested pci_enable_io [...] vgapci1: child nvidia1 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.74 Tue Sep 14 00:47:44 UTC 2021 [...] Cuse v0.1.36 @ /dev/cuse [...] tap0: Ethernet address: ... [...] igb0: changing name to 'if_inside' [...] igb1: changing name to 'if_outside' [...] igb2: changing name to 'if_redundant' [...] lo0: link state changed to UP [...] if_outside: link state changed to UP [...] if_inside: link state changed to UP [...] ums0 numa-domain 0 on uhub3 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/43.01, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 numa-domain 0 on uhub3 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/43.01, addr 1> on usbus0 [...] ums1 numa-domain 0 on uhub3 [...] ums1: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums1: 18 buttons and [XYZT] coordinates ID=2 [...] ums2 numa-domain 0 on uhub4 [...] ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 7> on usbus0 [...] ums2: 3 buttons and [Z] coordinates ID=0 [...] ubt0 numa-domain 0 on uhub3 [...] ubt0: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/88.91, addr 3> on usbus0 [...] uaudio0 numa-domain 0 on uhub3 [...] uaudio0: <vendor 0x046d HD Webcam C525, class 239/2, rev 2.00/0.10, addr 4> on usbus0 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm8: <USB audio> numa-domain 0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Limiting icmp unreach response from 277 to 200 packets/sec [...] Limiting icmp unreach response from 204 to 200 packets/sec [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <Mass Storage> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:9:0: Attached to scbus9 [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 (disconnected) [...] umass0: at uhub1, port 8, addr 1 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] pid 2742 (bsdisks), jid 0, uid 0: exited on signal 11 (core dumped) [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <Mass Storage> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:9:0: Attached to scbus9 [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 (disconnected) [...] umass0: at uhub1, port 8, addr 1 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Limiting icmp unreach response from 281 to 200 packets/sec [...] Limiting icmp unreach response from 260 to 200 packets/sec [...] tap0: link state changed to UP [...] tap0: link state changed to DOWN [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <Mass Storage> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:9:0: Attached to scbus9 [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 (disconnected) [...] umass0: at uhub1, port 8, addr 1 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <Mass Storage> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:9:0: Attached to scbus9 [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 (disconnected) [...] umass0: at uhub1, port 8, addr 1 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Limiting icmp unreach response from 278 to 200 packets/sec [...] Limiting icmp unreach response from 290 to 200 packets/sec [...] Limiting icmp unreach response from 211 to 200 packets/sec [...] Limiting icmp unreach response from 287 to 200 packets/sec [...] Limiting icmp unreach response from 263 to 200 packets/sec [...] tap0: link state changed to UP [...] tap0: link state changed to DOWN [...] ugen3.2: <HUAWEI JKM-LX2> at usbus3 [...] umass0 numa-domain 0 on uhub1 [...] umass0: <Mass Storage> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:9:0: Attached to scbus9 [...] cd0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Limiting icmp unreach response from 280 to 200 packets/sec [...] Limiting icmp unreach response from 236 to 200 packets/sec [...] ugen0.7: <vendor 0x0557 product 0x7000> at usbus0 (disconnected) [...] uhub4: at uhub3, port 14, addr 6 (disconnected) [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) [...] ukbd2: at uhub4, port 1, addr 7 (disconnected) [...] ukbd2: detached [...] ums2: at uhub4, port 1, addr 7 (disconnected) [...] ums2: detached [...] uhub4: detached [...] usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_SHORT_XFER [...] ugen0.7: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 8> on usbus0 [...] uhub4: 4 ports with 3 removable, self powered [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd2 numa-domain 0 on uhub4 [...] ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 9> on usbus0 [...] kbd4 at ukbd2 [...] ums2 numa-domain 0 on uhub4 [...] ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 9> on usbus0 [...] ums2: 3 buttons and [XYZ] coordinates ID=0 [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) [...] ukbd2: at uhub4, port 1, addr 9 (disconnected) [...] ukbd2: detached [...] ums2: at uhub4, port 1, addr 9 (disconnected) [...] ums2: detached [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd2 numa-domain 0 on uhub4 [...] ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 10> on usbus0 [...] kbd4 at ukbd2 [...] ums2 numa-domain 0 on uhub4 [...] ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 10> on usbus0 [...] ums2: 3 buttons and [Z] coordinates ID=0 [...] ugen0.7: <vendor 0x0557 product 0x7000> at usbus0 (disconnected) [...] uhub4: at uhub3, port 14, addr 8 (disconnected) [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) [...] ukbd2: at uhub4, port 1, addr 10 (disconnected) [...] ukbd2: detached [...] ums2: at uhub4, port 1, addr 10 (disconnected) [...] ums2: detached [...] uhub4: detached [...] usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_SHORT_XFER [...] ugen0.7: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 11> on usbus0 [...] uhub4: 4 ports with 3 removable, self powered [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd2 numa-domain 0 on uhub4 [...] ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 12> on usbus0 [...] kbd4 at ukbd2 [...] ums2 numa-domain 0 on uhub4 [...] ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 12> on usbus0 [...] ums2: 3 buttons and [XYZ] coordinates ID=0 [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) [...] ukbd2: at uhub4, port 1, addr 12 (disconnected) [...] ukbd2: detached [...] ums2: at uhub4, port 1, addr 12 (disconnected) [...] ums2: detached [...] ugen0.8: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd2 numa-domain 0 on uhub4 [...] ukbd2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 13> on usbus0 [...] kbd4 at ukbd2 [...] ums2 numa-domain 0 on uhub4 [...] ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 13> on usbus0 [...] ums2: 3 buttons and [Z] coordinates ID=0