[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] Setting sysctl net.isr.dispatch failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8059105280 (7685 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1a10000-0xa1a13fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1a14000-0xa1a15fff,0xa1a1e000-0xa1a1e0ff,0xa1a1d000-0xa1a1d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa170c000-0xa170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1708000-0xa170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1704000-0xa1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1700000-0xa1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1904000-0xa1904fff,0xa1900000-0xa1903fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1804000-0xa1804fff,0xa1800000-0xa1803fff at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1a18000-0xa1a18fff,0xa1a17000-0xa1a17fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601113 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC hA8aP> 0.1 SN ... MFG 02/2020 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 17MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Intenso SSD U0820A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: / was not properly dismounted [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa1a1c000-0xa1a1cfff,0xa1a1b000-0xa1a1bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa1a1a000-0xa1a1afff,0xa1a19000-0xa1a19fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1a16000-0xa1a160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] vlan0: changing name to 'vlan0.102' [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] pf: dropping packet with ip options [...] pf: dropping packet with ip options [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=16544767 high=16609995 win=65535 modulator=0] [lo=1245272492 high=1245338027 win=65228 modulator=0] 4:2 SA seq=1052328414 (1052328414) ack=16544767 len=0 ackskew=0 pkts=2:1 dir=out,rev [...] pf: State failure on: 2 | 6 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=16544767 high=16609995 win=65535 modulator=0] [lo=1245272492 high=1245338027 win=65228 modulator=0] 4:2 SA seq=1052328414 (1052328414) ack=16544767 len=0 ackskew=0 pkts=3:1 dir=out,rev [...] pf: State failure on: 2 | 6 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=16544767 high=16609995 win=65535 modulator=0] [lo=1245272492 high=1245338027 win=65228 modulator=0] 4:2 SA seq=1052328414 (1052328414) ack=16544767 len=0 ackskew=0 pkts=4:1 dir=out,rev [...] pf: State failure on: 2 | 6 [...] pf: dropping packet with ip options [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=10067940 high=10133168 win=65535 modulator=0] [lo=1883745937 high=1883811472 win=65228 modulator=0] 4:2 SA seq=3684532538 (3684532538) ack=10067940 len=0 ackskew=0 pkts=2:1 dir=out,rev [...] pf: State failure on: 1 | 5 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=10067940 high=10133168 win=65535 modulator=0] [lo=1883745937 high=1883811472 win=65228 modulator=0] 4:2 SA seq=3684532538 (3684532538) ack=10067940 len=0 ackskew=0 pkts=3:1 dir=out,rev [...] pf: State failure on: 1 | 5 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=10067940 high=10133168 win=65535 modulator=0] [lo=1883745937 high=1883811472 win=65228 modulator=0] 4:2 SA seq=3684532538 (3684532538) ack=10067940 len=0 ackskew=0 pkts=4:1 dir=out,rev [...] pf: State failure on: 1 | 5 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=11991750 high=12056978 win=65535 modulator=0] [lo=2836808265 high=2836873800 win=65228 modulator=0] 4:2 SA seq=1470630839 (1470630839) ack=11991750 len=0 ackskew=0 pkts=3:2 dir=out,rev [...] pf: State failure on: 2 | 6 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=11991750 high=12056978 win=65535 modulator=0] [lo=2836808265 high=2836873800 win=65228 modulator=0] 4:2 SA seq=1470630839 (1470630839) ack=11991750 len=0 ackskew=0 pkts=4:2 dir=out,rev [...] pf: State failure on: 2 | 6 [...] pf: dropping packet with ip options [...] pf: dropping packet with ip options [...] pf: dropping packet with ip options [...] pf: dropping packet with ip options [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=1836289119 high=1836289120 win=64240 modulator=0] [lo=0 high=64240 win=1 modulator=0] 2:0 S seq=1841203665 (1841203665) ack=0 len=0 ackskew=0 pkts=5:0 dir=in,fwd [...] pf: State failure on: 1 | 5 [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=2143137242 high=2143137243 win=64240 modulator=0] [lo=0 high=64240 win=1 modulator=0] 2:0 S seq=2148087474 (2148087474) ack=0 len=0 ackskew=0 pkts=5:0 dir=in,fwd [...] pf: State failure on: 1 | 5 [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=159139288 high=159139289 win=64240 modulator=0] [lo=0 high=64240 win=1 modulator=0] 2:0 S seq=164882385 (164882385) ack=0 len=0 ackskew=0 pkts=5:0 dir=in,fwd [...] pf: State failure on: 1 | 5 [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf: dropping packet with ip options [...] pf: BAD state: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=270619984 high=270619985 win=64240 modulator=0] [lo=0 high=64240 win=1 modulator=0] 2:0 S seq=275838771 (275838771) ack=0 len=0 ackskew=0 pkts=5:0 dir=in,fwd [...] pf: State failure on: 1 | 5 [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pf_map_addr: selected address XXX.XXX.XXX.XXX [...] pid 16651 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 3 2 0 0 0 done [...] All buffers synced. [...] Uptime: 9m24s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] Setting sysctl net.isr.dispatch failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8059105280 (7685 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1a10000-0xa1a13fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1a14000-0xa1a15fff,0xa1a1e000-0xa1a1e0ff,0xa1a1d000-0xa1a1d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa170c000-0xa170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1708000-0xa170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1704000-0xa1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1700000-0xa1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1904000-0xa1904fff,0xa1900000-0xa1903fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1804000-0xa1804fff,0xa1800000-0xa1803fff at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1a18000-0xa1a18fff,0xa1a17000-0xa1a17fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601124 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC hA8aP> 0.1 SN ... MFG 02/2020 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 17MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Intenso SSD U0820A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa1a1c000-0xa1a1cfff,0xa1a1b000-0xa1a1bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa1a1a000-0xa1a1afff,0xa1a19000-0xa1a19fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1a16000-0xa1a160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] vlan0: changing name to 'vlan0.102' [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] pid 94393 (sh), jid 0, uid 0: exited on signal 10 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 fsync: giving up on dirty (error = 35) 0xfffff80002f5a000: type VCHR [...] usecount 1, writecount 0, refcount 545 seqc users 0 rdev 0xfffff800017fc800 [...] hold count flags () [...] flags () [...] v_object 0xfffff8000310de70 ref 0 pages 10347 cleanbuf 542 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe0092a26020 (pid 22, syncer, tid 100099) [...] 3 1 0 0 0 done [...] All buffers synced. [...] Uptime: 33m18s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254761-4b4f06e3731 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] Setting sysctl net.isr.dispatch failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8059105280 (7685 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1a10000-0xa1a13fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1a14000-0xa1a15fff,0xa1a1e000-0xa1a1e0ff,0xa1a1d000-0xa1a1d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa170c000-0xa170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1708000-0xa170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1704000-0xa1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1700000-0xa1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1904000-0xa1904fff,0xa1900000-0xa1903fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1804000-0xa1804fff,0xa1800000-0xa1803fff at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1a18000-0xa1a18fff,0xa1a17000-0xa1a17fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601548 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC hA8aP> 0.1 SN ... MFG 02/2020 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 17MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Intenso SSD U0820A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa1a1c000-0xa1a1cfff,0xa1a1b000-0xa1a1bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa1a1a000-0xa1a1afff,0xa1a19000-0xa1a19fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1a16000-0xa1a160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] vlan0: changing name to 'vlan0.102' [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] [zone: pf states] PF states limit reached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 4 0 0 0 done [...] All buffers synced. [...] Uptime: 9h15m24s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254761-4b4f06e3731 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] Setting sysctl net.isr.dispatch failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8059109376 (7685 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1a10000-0xa1a13fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1a14000-0xa1a15fff,0xa1a1e000-0xa1a1e0ff,0xa1a1d000-0xa1a1d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa170c000-0xa170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1708000-0xa170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1704000-0xa1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1700000-0xa1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1904000-0xa1904fff,0xa1900000-0xa1903fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1804000-0xa1804fff,0xa1800000-0xa1803fff at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1a18000-0xa1a18fff,0xa1a17000-0xa1a17fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497600839 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC hA8aP> 0.1 SN ... MFG 02/2020 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 17MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Intenso SSD U0820A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 2> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.4: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.5: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ig4iic0: <Intel Gemini Lake I2C Controller-4> mem 0xa1a1c000-0xa1a1cfff,0xa1a1b000-0xa1a1bfff irq 31 at device 23.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Gemini Lake I2C Controller-7> mem 0xa1a1a000-0xa1a1afff,0xa1a19000-0xa1a19fff irq 34 at device 23.3 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1a16000-0xa1a160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] vlan0: changing name to 'vlan0.102' [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] re1: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] re1: link state changed to UP [...] vlan0.102: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] [zone: pf states] PF states limit reached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 60 60 48 1 1 1 0 0 0 done [...] All buffers synced. [...] Uptime: 31d17h31m43s [...] uhub1: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p3 stable/23.7-n254799-01e2d59d337 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] Setting sysctl net.isr.dispatch failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8059105280 (7685 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1a10000-0xa1a13fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1a14000-0xa1a15fff,0xa1a1e000-0xa1a1e0ff,0xa1a1d000-0xa1a1d7ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xa1400000-0xa14fffff,0xa170c000-0xa170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xa1300000-0xa13fffff,0xa1708000-0xa170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1704000-0xa1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1700000-0xa1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000ae6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1904000-0xa1904fff,0xa1900000-0xa1903fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> at device 20.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xa1804000-0xa1804fff,0xa1800000-0xa1803fff at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa1a18000-0xa1a18fff,0xa1a17000-0xa1a17fff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1497601200 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Front Analog Headphones)> at nid 33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 16GB <MMCHC hA8aP> 0.1 SN ... MFG 02/2020 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 17MB partition 3 at mmcsd0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Intenso SSD U0820A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...