[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-STABLE GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD E1-2500 APU with Radeon(TM) HD Graphics (1400.03-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3484602368 (3323 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-03 > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1400029843 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14254080 bytes at 0xffffffff82e47840 [...] 000.000130 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff811ae750, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <LENOVO TC-03> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfeb00000-0xfeb3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x9840) HDA Controller> mem 0xfeb64000-0xfeb67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0xd0804000-0xd0804fff,0xd0800000-0xd0803fff irq 36 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x40800000 [...] re0: MAC rev. 0x00400000 [...] miibus0: <MII bus> on re0 [...] rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 24 at device 2.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] rtwn0: <Realtek RTL8188EE> port 0xd000-0xd0ff mem 0xfea00000-0xfea03fff irq 40 at device 0.0 on pci2 [...] rtwn0: MAC/BB RTL8188EE, RF 6052 1T1R [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6e000-0xfeb6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb6b000-0xfeb6bfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6a000-0xfeb6a0ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,26 on hdaa1 [...] pcm2: <Realtek ALC662 rev3 (Front Analog Mic)> at nid 25 on hdaa1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <AMD OHCI root HUB> at usbus1 [...] uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen4.1: <AMD EHCI root HUB> at usbus4 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen3.1: <AMD OHCI root HUB> at usbus3 [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: CAM [...] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD5000AAVS-00ZTB0 01.01B01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] uhub0: 4 ports with 4 removable, self powered [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <TSSTcorp DVD-ROM SH-116BB LB01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ugen0.2: <vendor 0x046d product 0x081b> at usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <vendor 0x046d product 0x081b, class 239/2, rev 2.00/0.10, addr 1> on usbus0 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhub3: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <PixArt USB Optical Mouse> at usbus0 [...] ugen2.2: <SMI Corporation USB DISK> at usbus2 [...] umass0 on uhub1 [...] umass0: <SMI Corporation USB DISK, class 0/0, rev 2.10/11.00, addr 2> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <SMI USB DISK 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14800MB (30310400 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] ugen3.2: <Lenovo Lenovo Black Silk USB Keyboard> at usbus3 [...] ukbd0 on uhub4 [...] ukbd0: <Lenovo Lenovo Black Silk USB Keyboard, class 0/0, rev 2.00/1.30, addr 2> on usbus3 [...] kbd2 at ukbd0 [...] uhid0 on uhub4 [...] uhid0: <Lenovo Lenovo Black Silk USB Keyboard, class 0/0, rev 2.00/1.30, addr 2> on usbus3 [...] GEOM: iso9660/GHOSTBSD: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/GHOSTBSD: using the primary only -- recovery suggested. [...] ugen2.3: <Generic USB2.0-CRW> at usbus2 [...] ugen0.3: <PixArt USB Optical Mouse> at usbus0 (disconnected) [...] ugen0.3: <PixArt USB Optical Mouse> at usbus0 [...] Trying to mount root from zfs:livecd []... [...] ums0 on uhub0 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Cuse v0.1.36 @ /dev/cuse [...] random: unblocking device. [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (KABINI 0x1002:0x9838 0x17AA:0x3678 0x00). [...] [drm] register mmio base: 0xFEB00000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] probing mlw for device 1002:9838 = 0 [...] [drm] BIOS signature incorrect 0 0 [...] ATOM BIOS: 113-C53500-104 [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: VRAM: 512M 0x0000000F00000000 - 0x0000000F1FFFFFFF (512M used) [...] drmn0: GTT: 1024M 0x0000001000000000 - 0x000000103FFFFFFF [...] Successfully added WC MTRR for [0xa0000000-0xbfffffff]: 0; [...] [drm] Detected VRAM RAM=512M, BAR=512M [...] [drm] RAM width 64bits UNKNOWN [...] [TTM] Zone kernel: Available graphics memory: 1776056 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 512M of VRAM memory ready [...] [drm] amdgpu: 2601M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] PCIE GART of 1024M enabled (table at 0x0000000F00040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Internal thermal controller without fan control [...] [drm] amdgpu: dpm initialized [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] HDMI-A-1 [...] [drm] HPD2 [...] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953 [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY [...] [drm] Connector 1: [...] [drm] VGA-1 [...] [drm] DDC: 0x1970 0x1970 0x1971 0x1971 0x1972 0x1972 0x1973 0x1973 [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] radeon/kabini_pfp.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_pfp.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_pfp_bin [...] radeon/kabini_me.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_me.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_me_bin [...] radeon/kabini_ce.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_ce.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_ce_bin [...] radeon/kabini_mec.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_mec.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_mec_bin [...] radeon/kabini_rlc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_rlc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_rlc_bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] radeon/kabini_sdma.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_sdma.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_sdma_bin [...] radeon/kabini_sdma1.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_sdma1.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_sdma1_bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] radeon/kabini_uvd.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_uvd.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_uvd_bin [...] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [...] i_size_write unimplemented [...] radeon/kabini_vce.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/kabini_vce.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_kabini_vce_bin [...] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] [drm] UVD initialized successfully. [...] [drm] VCE initialized successfully. [...] [drm] fb mappable at 0xA0428000 [...] [drm] vram apper at 0xA0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xa0428000 vbase=0xfffff800a0428000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] i_size_write unimplemented [...] [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 [...] in6_purgeaddr: err=65, destination address delete failed [...] in_scrubprefix: err=65, prefix delete failed [...] lo0: link state changed to DOWN [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] in_scrubprefix: err=65, prefix delete failed [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP