[...] Copyright (c) FE77-8477 The DragonFly Project. [...] Copyright (c) AC00-C18A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] DragonFly vXXX.XXX.XXX.XXX.g4781f-RELEASE #1: Sun Mar 8 23:53:34 MSK 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] acpi_hpet: frequency 19200000 [...] TSC crystal clock: 19200000 Hz, TSC/crystal ratio: 234/3 [...] TSC invariant clock: 1497600000 Hz [...] CPU: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (1497.60-MHz K8-class CPU) [...] Origin = "GenuineIntel" Id = 0x506c9 Stepping = 9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x47f8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,RDRND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,RDSEED,SMAP> [...] Thermal and PM Features=0x57<SENSOR,TURBO,ARAT,PLN,PTM> [...] MONITOR/MWAIT Features=0x3<CST,INTBRK> [...] CPU Special Features Installed: SMAP SMEP [...] real memory = 8227143680 (7846 MB) [...] avail memory = 7849615360 (7485 MB) [...] LAPIC: enter X2APIC mode [...] madt_lapic_probe: lapic_count=4 x2apic_count=0 [...] ACPI CPUS = 4 [...] lapic: TSC Deadline Mode: shift 0, frequency 1497600000 Hz [...] CPU Topology: cores_per_chip: 4; threads_per_core: 1; chips_per_package: 1; [...] srat_probe: can't locate SRAT [...] Initialize MI interrupts for 4 cpus [...] TSC testing MP synchronization ... [...] TSC MPSYNC TEST 442 4 -> 110 (10uS=14976) [...] TSC is MP synchronized [...] TSC: cputimer freq 93600000, shift 4 [...] Spectre: support=( IBRS STIBP IBPB ) req=0000 operating=( none ) [...] MDS: support=( none ) req=ffff operating=( none ) [...] VMM: available, disabled by default [...] machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug [...] system call performance will be impacted [...] interrupt uses mplock: swi_taskq [...] wdog: In-kernel automatic watchdog reset enabled [...] md0: Malloc disk [...] evdev device loaded. [...] kbd1 at kbdmux0 [...] ACPI: RSDP 0x000000006D9C4000 000024 (v02 ALASKA) [...] ACPI: XSDT 0x000000006D9C40C0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: FACP 0x000000006D9CD210 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: DSDT 0x000000006D9C4250 008FB3 (v02 ALASKA A M I 01072009 INTL 20120913) [...] ACPI: FACS 0x000000006D9E2080 000040 [...] ACPI: FPDT 0x000000006D9CD330 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: FIDT 0x000000006D9CD380 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: MCFG 0x000000006D9CD420 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [...] ACPI: DBG2 0x000000006D9CD460 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: DBGP 0x000000006D9CD4E0 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: HPET 0x000000006D9CD520 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: LPIT 0x000000006D9CD560 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: APIC 0x000000006D9CD5C0 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: NPKT 0x000000006D9CD650 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: PRAM 0x000000006D9CD6C0 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: WSMT 0x000000006D9CD6F0 000028 (v00 INTEL EDK2 00000003 BRXT 0100000D) [...] ACPI: SSDT 0x000000006D9CD720 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [...] ACPI: SSDT 0x000000006D9CE280 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913) [...] ACPI: AAFT 0x000000006D9CF970 0002DA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [...] ACPI: SSDT 0x000000006D9CFC50 000442 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [...] ACPI: SSDT 0x000000006D9D00A0 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [...] ACPI: SSDT 0x000000006D9D07D0 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913) [...] ACPI: SSDT 0x000000006D9D0B00 00017C (v02 PmRef ApTst 00003000 INTL 20120913) [...] ACPI: SSDT 0x000000006D9D0C80 002760 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [...] ACPI: UEFI 0x000000006D9D33E0 000042 (v01 ALASKA A M I 00000000 00000000) [...] ACPI: BGRT 0x000000006D9D3430 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: WDAT 0x000000006D9D3470 000104 (v01 00000000 00000000) [...] ACPI: NHLT 0x000000006D9D3580 001A50 (v00 INTEL EDK2 00000002 01000013) [...] sc0: <System console> on motherboard [...] sc0: EFI_FB <16 virtual consoles, flags=0x700> [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] ACPI: 8 ACPI AML tables successfully acquired and loaded [...] ACPI FADT: SCI testing interrupt mode ... [...] ACPI FADT: SCI select level/low [...] can't fetch resources for \_SB_.PCI0.SDIO.BRC2 - AE_AML_INVALID_RESOURCE_TYPE [...] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] acpi_timer0 on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF8005EB18180 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [...] cpu_cst0: <ACPI CPU C-State> on cpu0 [...] cpu_pst0: <ACPI CPU P-State> on cpu0 [...] clockmod0: <CPU clock modulation> on cpu0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] cpu1: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF8005EB40D00 00015F (v02 PmRef ApIst 00003000 INTL 20120913) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF8005EA68C70 00008D (v02 PmRef ApCst 00003000 INTL 20120913) [...] cpu_cst1: <ACPI CPU C-State> on cpu1 [...] cpu_pst1: <ACPI CPU P-State> on cpu1 [...] clockmod1: <CPU clock modulation> on cpu1 [...] coretemp1: <CPU On-Die Thermal Sensors> on cpu1 [...] cpu2: <ACPI CPU> on acpi0 [...] cpu_cst2: <ACPI CPU C-State> on cpu2 [...] cpu_pst2: <ACPI CPU P-State> on cpu2 [...] clockmod2: <CPU clock modulation> on cpu2 [...] coretemp2: <CPU On-Die Thermal Sensors> on cpu2 [...] cpu3: <ACPI CPU> on acpi0 [...] cpu_cst3: <ACPI CPU C-State> on cpu3 [...] cpu_pst3: <ACPI CPU P-State> on cpu3 [...] clockmod3: <CPU clock modulation> on cpu3 [...] coretemp3: <CPU On-Die Thermal Sensors> on cpu3 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x70-0x77 on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x8fffffff,0x90000000-0x90ffffff irq 19 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <multimedia, HDA> (vendor 0x8086, dev 0x5a98) at device 14.0 irq 25 [...] pci0: <simple comms> (vendor 0x8086, dev 0x5a9a) at device 15.0 irq 20 [...] ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097 mem 0x91317000-0x913177ff,0x91318000-0x913180ff,0x91314000-0x91315fff irq 19 at device 18.0 on pci0 [...] ahci0: AE did not auto-clear! [...] ahci0: Intel hocus pocus [...] ahci0: AHCI 1.3.1 cap 0xe136ff01<S64A,NCQ,SSNTF,SCLO,SAM,SPM,PMD,SSC,PSC> cap2 0x3c<DESO,SADM,SDS,APST>, 2 ports, 32 tags/port, gen 3 (6Gbps) [...] ahci0.1: PMPROBE(1) No Port Multiplier was found. [...] ahci0.1: PMPROBE(1) No Port Multiplier was found. [...] ahci0.0: PMPROBE(2) No Port Multiplier was found. [...] ahci0.1: PHY offline [...] ahci0.0: PMPROBE(2) No Port Multiplier was found. [...] ahci0.0: Found DISK "ST1000DM003-1CH162 CC44" serial=... [...] ahci0.0: tags=32/32 satacap=850e satacap2=0006 satafea=004c NCQ=YES capacity=953869.71MB [...] ahci0.0: f85=3469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen [...] pcib1: <ACPI PCI-PCI bridge> irq 22 at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91200000-0x91203fff,0x91204000-0x91204fff irq 22 at device 0.0 on pci1 [...] re0: MAC version 0x4c000000, MACFG 56, support MSI [...] re0: bus speed 125MHz [...] re0: MAC address: XXX [...] pcib2: <ACPI PCI-PCI bridge> irq 23 at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 20 at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ahci1: <AHCI-PCI-SATA> port 0xd000-0xd01f,0xd020-0xd023,0xd030-0xd037,0xd040-0xd043,0xd050-0xd057 mem 0x91100000-0x911001ff irq 20 at device 0.0 on pci3 [...] ahci1: AHCI 1.2 cap 0xeb32ff81<S64A,NCQ,SSNTF,SSS,SAL,SCLO,SPM,PMD,SSC,PSC,CCCS>, 2 ports, 32 tags/port, gen 3 (6Gbps) [...] ahci1.0: PMPROBE PM Signature not detected [...] ahci1.0: Found SSD "KingDian S400 120GB Q0526A" serial=... [...] ahci1.0: tags=32/32 satacap=850e satacap2=0086 satafea=0144 NCQ=YES capacity=114473.46MB [...] ahci1.0: f85=7469 f86=bc01 f87=4063 WC=enabled RA=enabled SEC=frozen [...] ahci1.1: No device detected [...] pcib4: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ugen0.1: <0x8086> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x5ad4) at device 31.1 [...] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 [...] sio0: type 16550A [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] aesni0: <AES-CBC,AES-XTS> on motherboard [...] padlock0: No ACE support. [...] rdrand0: <RdRand RNG> on motherboard [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] uhub0: 15 ports with 15 removable, self powered [...] lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0 [...] sio2: can't drain, serial port might not exist, disabling [...] hpt27xx: no controller detected. [...] CAM: Configuring 4 busses [...] CAM: finished configuring all busses [...] da0 at ahci0 bus 0 target 0 lun 0 [...] da0: <SATA ST1000DM003-1CH1 CC44> Fixed Direct Access SCSI-4 device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) [...] da1 at ahci1 bus 0 target 0 lun 0 [...] da1: <SATA KingDian S400 12 Q052> Fixed Direct Access SCSI-4 device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) [...] da1: supports TRIM [...] Mounting root from hammer2:serno/XXXXXXXXXXXXXXXXXX [...] hammer2_mount: root 'serno/XXXXXXXXXXXXXXXXXX' [...] hammer2_mount: dev="serno/XXXXXXXXXXXXXXXXXX" label="ROOT" rdonly=1 [...] hammer2: using volume header #2 [...] hammer2_mount hmp=0xfffff800e32c0000 pmp=0xfffff800e11e8600 [...] DMA space used: 6148k, remaining available: 131072k [...] Mounting devfs [...] hammer2_mount: '/dev/serno/XXXXXXXXXXXXXXXXXXXXXXX' [...] hammer2_mount: dev="/dev/serno/XXXXXXXXXXXXXXXXXX" label="ROOT" rdonly=1 [...] hammer2 mount "serno/XXXXXXXXXXXXXXXXXX": no recovery needed [...] swap low/high-water marks set to 20968/31453