[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): text 80x25 [...] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (3014.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x40f33 Family=0xf Model=0x43 Stepping=3 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> [...] SVM: NAsids=64 [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8277798912 (7894 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Nvidia NVDAACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <Nvidia NVDAACPI> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] attimer0: Can't map interrupt. [...] atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 4 range: 81 vs 7f [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 1.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 1.2 (no driver attached) [...] ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xbc00-0xbcff mem 0xfdfff000-0xfdfff0ff irq 17 at device 6.0 on pci1 [...] re0: Chip rev. 0x10000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pci1: <serial bus, FireWire> at device 9.0 (no driver attached) [...] hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfe024000-0xfe027fff irq 23 at device 5.0 on pci0 [...] atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 20 at device 7.0 on pci0 [...] miibus1: <MII bus> on nfe0 [...] rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] nfe0: Ethernet address: ... [...] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 21 at device 8.0 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 22 at device 8.1 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci2 [...] ata5: <ATA channel> at channel 1 on atapci2 [...] pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xfb000000-0xfbffffff,0xd8000000-0xdfffffff,0xe6000000-0xe7ffffff irq 16 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac1: <NVIDIA GT108 HDA Controller> mem 0xfcffc000-0xfcffffff irq 16 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/16 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] powernow0: <PowerNow! K8> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1200 (Analog 5.1/2.0)> at nid 20,21,22 and 24,26,28 on hdaa0 [...] pcm1: <Realtek ALC1200 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1200 (Rear Digital)> at nid 30 and 31 on hdaa0 [...] hdacc1: <NVIDIA GT440 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA GT440 HDA CODEC> at cad 1 on hdac1 [...] hdaa2: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc2 [...] pcm4: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA GT440 HDA CODEC> at cad 2 on hdac1 [...] hdaa3: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc3 [...] pcm5: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] hdacc4: <NVIDIA GT440 HDA CODEC> at cad 3 on hdac1 [...] hdaa4: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc4 [...] pcm6: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa4 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] uhub0: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] ada0 at ata2 bus 0 scbus2 target 0 lun 0 [...] ada0: <ST9320423AS 0002SDM1> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 305245MB (625142448 512 byte sectors) [...] cd0 at ata5 bus 0 scbus5 target 0 lun 0 [...] cd0: <HL-DT-ST DVDRRW GSA-H30L S755> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub1: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <Generic USB2.0-CRW> at usbus1 [...] umass0 on uhub1 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus6 target 0 lun 1 [...] da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus6 target 0 lun 2 [...] da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus6 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] atrtc0: WARNING: Battery failure indication [...] Warning: bad time from time-of-day clock, system time will not be set accurately [...] nvidia0: <GeForce GT 430> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.144 Wed Jun 2 22:57:39 UTC 2021 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] nfe0: link state changed to DOWN [...] re0: link state changed to UP