[...] 854.275159 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 854.282640 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan3: link state changed to DOWN [...] igb3_vlan4: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan3: link state changed to DOWN [...] igb3_vlan4: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] wg0: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 3h46m58s [...] cdce0: detached [...] umass0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8163831808 (7785 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1596077634 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7300000-0xf73fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7200000-0xf72fffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7100000-0xf71fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7000000-0xf70fffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 17 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7800000-0xf780ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7814000-0xf7815fff,0xf7818000-0xf78180ff,0xf7817000-0xf78177ff irq 18 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7704000-0xf7704fff,0xf7700000-0xf7703fff irq 16 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA DT01ACA050 MS1OA7S0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 20 ports with 20 removable, self powered [...] ugen0.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] cdce0 on uhub0 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus0 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] vlan0: changing name to 'igb3_vlan102' [...] vlan1: changing name to 'igb3_vlan200' [...] vlan2: changing name to 'igb3_vlan300' [...] vlan3: changing name to 'igb3_vlan500' [...] vlan4: changing name to 'igb3_vlan3' [...] vlan5: changing name to 'igb3_vlan4' [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe1' [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ovpns1: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump flowset buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] 512.086091 [1130] generic_netmap_attach Emulated adapter for pppoe1 created (prev was NULL) [...] 512.094396 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe1 destroyed [...] pppoe1: permanently promiscuous mode enabled [...] 512.107431 [1130] generic_netmap_attach Emulated adapter for pppoe1 created (prev was NULL) [...] 512.165369 [ 320] generic_netmap_register Emulated adapter for pppoe1 activated [...] 782.493352 [ 295] generic_netmap_unregister Emulated adapter for pppoe1 deactivated [...] 782.500886 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe1 destroyed [...] wg0: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 20h9m14s [...] cdce0: detached [...] umass0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8163831808 (7785 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1596077840 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7300000-0xf73fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7200000-0xf72fffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7100000-0xf71fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7000000-0xf70fffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 17 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7800000-0xf780ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7814000-0xf7815fff,0xf7818000-0xf78180ff,0xf7817000-0xf78177ff irq 18 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7704000-0xf7704fff,0xf7700000-0xf7703fff irq 16 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA DT01ACA050 MS1OA7S0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 20 ports with 20 removable, self powered [...] ugen0.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:4:0: Attached to scbus4 [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] cdce0 on uhub0 [...] cdce0: <CDC Ethernet Control Model (ECM)> on usbus0 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] vlan0: changing name to 'igb3_vlan102' [...] vlan1: changing name to 'igb3_vlan200' [...] vlan2: changing name to 'igb3_vlan300' [...] vlan3: changing name to 'igb3_vlan500' [...] vlan4: changing name to 'igb3_vlan3' [...] vlan5: changing name to 'igb3_vlan4' [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe1' [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ovpns1: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump flowset buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] 996.053766 [1130] generic_netmap_attach Emulated adapter for pppoe1 created (prev was NULL) [...] 996.062054 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe1 destroyed [...] pppoe1: permanently promiscuous mode enabled [...] 996.075069 [1130] generic_netmap_attach Emulated adapter for pppoe1 created (prev was NULL) [...] 996.132682 [ 320] generic_netmap_register Emulated adapter for pppoe1 activated [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] ng0: changing name to 'pppoe1' [...] 336.826953 [ 295] generic_netmap_unregister Emulated adapter for pppoe1 deactivated [...] 336.834548 [1035] generic_netmap_dtor Emulated netmap adapter for pppoe1 destroyed [...] ugen0.2: <HUAWEIMOBILE HUAWEIMOBILE> at usbus0 (disconnected) [...] cdce0: at uhub0, port 5, addr 1 (disconnected) [...] cdce0: detached [...] umass0: at uhub0, port 5, addr 1 (disconnected) [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] igb3: promiscuous mode enabled [...] igb3: promiscuous mode disabled [...] igb3: promiscuous mode enabled [...] arp: packet with unknown hardware format 0x06 received on igb3_vlan102 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan3: link state changed to DOWN [...] igb3_vlan4: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] ng0: changing name to 'pppoe1' [...] re0: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] igb3: link state changed to DOWN [...] igb3_vlan3: link state changed to DOWN [...] igb3_vlan4: link state changed to DOWN [...] vlan0: changing name to 'igb3_vlan102' [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] vlan1: changing name to 'igb3_vlan200' [...] vlan2: changing name to 'igb3_vlan300' [...] vlan3: changing name to 'igb3_vlan500' [...] vlan4: changing name to 'igb3_vlan3' [...] vlan5: changing name to 'igb3_vlan4' [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan3: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] igb3: promiscuous mode disabled [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump flowset buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] igb3: promiscuous mode enabled [...] ng0: changing name to 'pppoe0' [...] ng0: changing name to 'pppoe1' [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb2: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan4: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan4: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb3: promiscuous mode disabled [...] wg0: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 2 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] All buffers synced. [...] Uptime: 4d1h9m0s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8163831808 (7785 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1596077110 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7300000-0xf73fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7200000-0xf72fffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7100000-0xf71fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7000000-0xf70fffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 17 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7800000-0xf780ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7814000-0xf7815fff,0xf7818000-0xf78180ff,0xf7817000-0xf78177ff irq 18 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7704000-0xf7704fff,0xf7700000-0xf7703fff irq 16 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA DT01ACA050 MS1OA7S0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 20 ports with 20 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] vlan0: changing name to 'igb3_vlan102' [...] vlan1: changing name to 'igb3_vlan200' [...] vlan2: changing name to 'igb3_vlan300' [...] vlan3: changing name to 'igb3_vlan500' [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] re0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe1' [...] nd6_dad_timer: called with non-tentative address fe80:XXXX::XXX:XXX:XXX:XXX(pppoe1) [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ovpns1: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump flowset buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] igb3: promiscuous mode enabled [...] igb3: promiscuous mode disabled [...] 735.656653 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb2: permanently promiscuous mode enabled [...] 735.719865 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb2: link state changed to DOWN [...] 735.823364 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: permanently promiscuous mode enabled [...] 735.837389 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 735.975445 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: permanently promiscuous mode enabled [...] 736.087317 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] 737.319068 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb1: permanently promiscuous mode enabled [...] 737.330319 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb1: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] 665.786412 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 665.793911 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb2: link state changed to DOWN [...] 665.897276 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 666.004145 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] ng0: changing name to 'pppoe1' [...] nd6_dad_timer: called with non-tentative address fe80:XXXX::XXX:XXX:XXX:XXX(pppoe1) [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb3, outif pppoe1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb3, outif pppoe1 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] 186.456211 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 186.463697 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 186.471220 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb2: link state changed to DOWN [...] 186.576009 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] 799.485250 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 799.492728 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb2: link state changed to DOWN [...] 799.598413 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 799.606065 [ 853] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to DOWN [...] igb3_vlan102: link state changed to DOWN [...] igb3_vlan200: link state changed to DOWN [...] igb3_vlan500: link state changed to DOWN [...] igb3_vlan300: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb2: link state changed to UP [...] wg0: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb3, outif pppoe1 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 8h3m28s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8163831808 (7785 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1596077531 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xf7300000-0xf73fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xf7200000-0xf72fffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xf7100000-0xf71fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xf7000000-0xf70fffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 17 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7800000-0xf780ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7814000-0xf7815fff,0xf7818000-0xf78180ff,0xf7817000-0xf78177ff irq 18 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7704000-0xf7704fff,0xf7700000-0xf7703fff irq 16 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TOSHIBA DT01ACA050 MS1OA7S0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 20 ports with 20 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb3: link state changed to DOWN [...] vlan0: changing name to 'igb3_vlan102' [...] vlan1: changing name to 'igb3_vlan200' [...] vlan2: changing name to 'igb3_vlan300' [...] vlan3: changing name to 'igb3_vlan500' [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] re0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe1' [...] nd6_dad_timer: called with non-tentative address fe80:XXXX::XXX:XXX:XXX:XXX(pppoe1) [...] igb3: link state changed to UP [...] igb3_vlan102: link state changed to UP [...] igb3_vlan200: link state changed to UP [...] igb3_vlan500: link state changed to UP [...] igb3_vlan300: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ovpns1: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump sched buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] Bump flowset buckets to 256 (was 0) [...] config_aqm Unable to configure flowset, flowset busy! [...] ovpns1: link state changed to DOWN [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb3, outif pppoe1 [...] ng0: changing name to 'pppoe1' [...] nd6_dad_timer: called with non-tentative address fe80:XXXX::XXX:XXX:XXX:XXX(pppoe1)