[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p6 GENERIC i386 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.59-MHz 686-class CPU) [...] Origin="GenuineIntel" Id=0x6d6 Family=0x6 Model=0xd Stepping=6 [...] Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> [...] Features2=0x180<EST,TM2> [...] real memory = 1610612736 (1536 MB) [...] avail memory = 1543454720 (1471 MB) [...] random: unblocking device. [...] Timecounter "TSC" frequency 1698591961 Hz quality 800 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0x14da050, 0) error 19 [...] [ath_dfs] loaded [...] [ath_rate] loaded [...] [ar9300] loaded [...] [ar5212] loaded [...] [ar5416] loaded [...] [ar5211] loaded [...] [ar5210] loaded [...] [ath] loaded [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181213/tbfadt-748) [...] Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20181213/tbfadt-796) [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <IBM TP-1R> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] agp0: <Intel 82855 host to AGP bridge> on hostb0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 [...] usbus0 on uhci0 [...] uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 [...] usbus1 on uhci1 [...] uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 [...] usbus2 on uhci2 [...] ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] cbb0: <PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 [...] cardbus0: <CardBus bus> on cbb0 [...] pccard0: <16-bit PCCard bus> on cbb0 [...] cbb1: <PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 [...] cardbus1: <CardBus bus> on cbb1 [...] pccard1: <16-bit PCCard bus> on cbb1 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x8000-0x803f mem 0xc0240000-0xc025ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Ethernet address: ... [...] ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 [...] ath0: AR5212 mac 5.6 RF5111 phy 4.1 [...] ath0: 2GHz radio: 0x0023; 5GHz radio: 0x0017 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0 [...] pcm0: <Analog Devices AD1981B AC97 Codec> [...] pci0: <simple comms, generic modem> at device 31.6 (no driver attached) [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 drq 3 on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] usbus0: 12Mbps Full Speed USB v1.0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ada0 at ata0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CHN-mSATAQ3-120 Q0707A> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes) [...] ada0: 114473MB (234441648 512 byte sectors) [...] cd0 at ata1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVDRAM GSA-U10N 1.05> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] info: [drm] Initialized drm 1.1.0 20060810 [...] uhub3: 6 ports with 6 removable, self powered [...] drmn0: ======================================================= [...] drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: ======================================================= [...] drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: <ATI Radeon LW RV200 Mobility 7500 M7> on vgapci0 [...] info: [drm] RADEON_IS_AGP [...] info: [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0530). [...] info: [drm] register mmio base: 0xC0100000 [...] info: [drm] register mmio size: 65536 [...] info: [drm] radeon_atrm_get_bios: ===> Try ATRM... [...] info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=4c57 [...] info: [drm] radeon_atrm_get_bios: Get ACPI device handle [...] info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM" [...] info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND [...] info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... [...] info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table [...] info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND [...] info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... [...] info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000 [...] info: [drm] igp_read_bios_from_vram: Map address: 0x18722000 (262144 bytes) [...] info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000 [...] info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... [...] info: [drm] radeon_read_bios: Map address: 0x4c0000 (131072 bytes) [...] drmn0: info: GTT: 256M 0xD0000000 - 0xDFFFFFFF [...] drmn0: info: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (32M used) [...] info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [...] info: [drm] Driver supports precise vblank timestamp query. [...] info: [drm] radeon: irq initialized. [...] info: [drm] Detected VRAM RAM=128M, BAR=128M [...] info: [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 771496 kiB [...] [TTM] Initializing pool allocator [...] info: [drm] radeon: 32M of VRAM memory ready [...] info: [drm] radeon: 256M of GTT memory ready. [...] drmn0: info: WB disabled [...] drmn0: info: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0x0x157fe000 [...] info: [drm] Loading R100 Microcode [...] radeon/R100_cp.bin: could not load firmware image, error 2 [...] radeon/R100_cp.bin: could not load firmware image, error 2 [...] drmn0: Successfully loaded firmware image with name (mapped name): radeon/R100_cp.bin (radeon_R100_cp_bin) [...] info: [drm] radeon: ring at 0x00000000D0001000 [...] info: [drm] ring test succeeded in 1 usecs [...] info: [drm] ib test succeeded in 0 usecs [...] info: [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xe4000000 [...] info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000 [...] radeon_iicbb0 on drmn0 [...] iicbus0: <Philips I2C bus> on iicbb0 addr 0x1 [...] iic0: <I2C generic I/O> on iicbus0 [...] radeon_iicbb1 on drmn0 [...] iicbus1: <Philips I2C bus> on iicbb1 addr 0x15 [...] iic1: <I2C generic I/O> on iicbus1 [...] radeon_iicbb2 on drmn0 [...] iicbus2: <Philips I2C bus> on iicbb2 addr 0x15 [...] iic2: <I2C generic I/O> on iicbus2 [...] radeon_iicbb3 on drmn0 [...] iicbus3: <Philips I2C bus> on iicbb3 addr 0x15 [...] iic3: <I2C generic I/O> on iicbus3 [...] info: [drm] Panel ID String: 1024x768 [...] info: [drm] Panel Size 1024x768 [...] info: [drm] Radeon Display Connectors [...] info: [drm] Connector 0: [...] info: [drm] VGA-1 [...] info: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [...] info: [drm] Encoders: [...] info: [drm] CRT1: INTERNAL_DAC1 [...] info: [drm] Connector 1: [...] info: [drm] DVI-D-1 [...] info: [drm] HPD1 [...] info: [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [...] info: [drm] Encoders: [...] info: [drm] DFP1: INTERNAL_TMDS1 [...] info: [drm] Connector 2: [...] info: [drm] LVDS-1 [...] info: [drm] Encoders: [...] info: [drm] LCD1: INTERNAL_LVDS [...] info: [drm] Connector 3: [...] info: [drm] SVIDEO-1 [...] info: [drm] Encoders: [...] info: [drm] TV1: INTERNAL_DAC2 [...] info: [drm] radeon: power management initialized [...] info: [drm] Connector VGA-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.VGA-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector DVI-D-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.DVI-D-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector LVDS-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.LVDS-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector SVIDEO-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.SVIDEO-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] fb mappable at 0xE0040000 [...] info: [drm] vram apper at 0xE0000000 [...] info: [drm] size 786432 [...] info: [drm] fb depth is 8 [...] info: [drm] pitch is 1024 [...] fbd0 on drmn0 [...] VT: Replacing driver "vga" with new "fb". [...] info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP