[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p18-HBSD #1 815defa6fd0(stable/21.1)-dirty: Mon Jun 14 09:17:18 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD FX(tm)-4130 Quad-Core Processor (3816.96-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7723745280 (7365 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 2 [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1908479298 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7f0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <GBT GBTUACPI> on motherboard [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xae00-0xaeff mem 0xd0000000-0xdfffffff,0xfd5e0000-0xfd5effff,0xfd400000-0xfd4fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RS780 HDA Controller> mem 0xfd5fc000-0xfd5fffff irq 19 at device 5.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network, ethernet> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfddff000-0xfddfffff irq 16 at device 0.0 on pci3 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xcf00-0xcf1f mem 0xfdbc0000-0xfdbdffff,0xfdb00000-0xfdb7ffff,0xfdbfc000-0xfdbfffff irq 17 at device 0.0 on pci4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0xbe00-0xbeff mem 0xfd8ff000-0xfd8fffff,0xfd8f8000-0xfd8fbfff irq 18 at device 0.0 on pci5 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 [...] usbus7 on ohci4 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fdc0: does not respond [...] device_attach: fdc0 attach returned 6 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] fdc0: No FDOUT register! [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <VIA VT2020 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <VIA VT2020 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <VIA VT2020 (Analog 2.0+HP/2.0)> at nid 36,40 and 43,41,42 on hdaa1 [...] pcm2: <VIA VT2020 (Rear-panel Digital)> at nid 46 on hdaa1 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen0.1: <0x1106 XHCI root HUB> at usbus0 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub5: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4: 2 ports with 2 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub6: 3 ports with 3 removable, self powered [...] uhub7: 3 ports with 3 removable, self powered [...] uhub5: 5 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0 [...] uhub8 on uhub5 [...] uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 840 EVO 120GB EXT0BB0Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] mlx4_core0: <mlx4_core> mem 0xfdf00000-0xfdffffff,0xfc800000-0xfcffffff irq 18 at device 0.0 on pci2 [...] mlx4_core: Mellanox ConnectX core driver v3.5.1 (April 2019) [...] mlx4_core: Initializing mlx4_core [...] uhub8: 4 ports with 4 removable, self powered [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] uhub0: 6 ports with 6 removable, self powered [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 4 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 4 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 4 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 4 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 184 files 1 [...] WARNING: /mnt: reload pending error: blocks 184 files 1 [...] WARNING: /mnt: reload pending error: blocks 184 files 1 [...] uhub3: 6 ports with 6 removable, self powered [...] WARNING: /mnt: reload pending error: blocks 184 files 1 [...] em0: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 [...] mlxen1: link state changed to UP [...] vlan0: changing name to 'mlxen1_vlan100' [...] vlan1: changing name to 'mlxen1_vlan101' [...] vlan2: changing name to 'mlxen1_vlan102' [...] vlan3: changing name to 'mlxen1_vlan667' [...] vlan4: changing name to 'mlxen1_vlan666' [...] mlxen1: tso4 disabled due to -txcsum. [...] mlxen1: tso6 disabled due to -txcsum6. [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: promiscuous mode enabled [...] mlxen1: promiscuous mode enabled [...] mlxen1_vlan100: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] mlxen1_vlan101: promiscuous mode enabled [...] mlxen1_vlan102: promiscuous mode enabled [...] mlxen1_vlan666: promiscuous mode enabled [...] mlxen1_vlan667: promiscuous mode enabled [...] lo0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled