[...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 10 5 6 8 12 14 3 15 7 11 4 13 9 [...] Timecounter "TSC-low" frequency 1596083190 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <7-port Hub> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <Virtual Cdrom> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <Virtual HardDisk> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:8:1: Attached to scbus8 [...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Keyboard Interface> on usbus0 [...] kbd1 at ukbd0 [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] urndis0 on uhub1 [...] urndis0: <RNDIS Notification Interface> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ums0 on uhub1 [...] ums0: <Mouse Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 3 4 4 1 1 0 1 1 1 1 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 27m26s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 4 2 10 8 12 14 7 15 3 5 11 13 9 [...] Timecounter "TSC-low" frequency 1596076499 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <7-port Hub> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <Virtual Cdrom> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Root mount waiting for: usbus0 [...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <Virtual HardDisk> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:8:1: Attached to scbus8 [...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Keyboard Interface> on usbus0 [...] kbd1 at ukbd0 [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] urndis0 on uhub1 [...] urndis0: <RNDIS Notification Interface> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ums0 on uhub1 [...] ums0: <Mouse Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ix1: link state changed to UP [...] ix0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 (disconnected) [...] uhub1: at uhub0, port 9, addr 1 (disconnected) [...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 (disconnected) [...] umass0: at uhub1, port 1, addr 2 (disconnected) [...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> s/n ... detached [...] (cd0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 (disconnected) [...] umass1: at uhub1, port 2, addr 3 (disconnected) [...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da0: <AMI Virtual HDisk0 1.00> s/n ... detached [...] (da0:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0 (disconnected) [...] urndis0: at uhub1, port 3, addr 4 (disconnected) [...] urndis0: detached [...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 4, addr 5 (disconnected) [...] ukbd0: detached [...] ums0: at uhub1, port 4, addr 5 (disconnected) [...] ums0: detached [...] uhub1: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 36m21s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669023744 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 10 5 6 2 8 12 14 7 15 3 11 4 13 9 [...] Timecounter "TSC-low" frequency 1596072975 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 29m10s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669019648 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 10 3 4 8 12 14 7 15 5 2 11 13 9 [...] Timecounter "TSC-low" frequency 1596079208 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 1 1 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 21m53s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669011456 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 6 10 5 12 9 14 3 7 15 11 4 13 8 [...] Timecounter "TSC-low" frequency 1596077377 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 2 1 1 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 17m47s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 9 2 6 10 12 14 3 15 4 7 11 13 8 5 [...] Timecounter "TSC-low" frequency 1596086292 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 32m30s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669019648 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 6 4 10 8 12 14 7 15 3 5 11 13 9 [...] Timecounter "TSC-low" frequency 1596109342 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 2 2 2 2 2 1 1 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 16m45s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.19-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 6 10 8 3 12 15 7 2 5 11 13 9 14 [...] Timecounter "TSC-low" frequency 1596094091 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 10 10 9 9 9 8 6 5 3 3 0 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 4m40s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669019648 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 2 6 10 8 12 14 3 15 7 5 11 13 9 [...] Timecounter "TSC-low" frequency 1596110377 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 3m59s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 10 12 14 3 6 11 4 8 13 5 9 15 7 [...] Timecounter "TSC-low" frequency 1596110694 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 69798 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 8 8 4 0 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 1d19h52m22s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.15-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669019648 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 7 2 10 5 8 15 6 3 12 11 4 9 13 14 [...] Timecounter "TSC-low" frequency 1596074020 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 4 4 4 2 2 1 1 1 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 3m41s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 9 2 4 6 10 12 14 3 15 7 5 11 13 8 [...] Timecounter "TSC-low" frequency 1596105282 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <7-port Hub> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <Virtual Cdrom> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <Virtual HardDisk> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:8:1: Attached to scbus8 [...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Keyboard Interface> on usbus0 [...] kbd1 at ukbd0 [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] urndis0 on uhub1 [...] urndis0: <RNDIS Notification Interface> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ums0 on uhub1 [...] ums0: <Mouse Interface> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 3 3 3 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 10m8s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 10 8 6 4 12 14 3 11 5 7 13 9 15 [...] Timecounter "TSC-low" frequency 1596086849 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix0: link state changed to UP [...] ix1: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 4d18h42m38s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz (3192.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,SGXLC> [...] Structured Extended Features3=0xbc000410<FSRM,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137434759168 (131068 MB) [...] avail memory = 133669015552 (127476 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 6 10 9 5 12 14 3 15 7 11 4 13 8 [...] Timecounter "TSC-low" frequency 1596080564 Hz quality 1000 [...] KTLS: Initialized 16 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] 000.000067 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace [...] nvd1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726T6TALE6L1 VKGNX41C> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 22 ports with 22 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] lo0: link state changed to UP [...] ix0: link state changed to UP [...] ix0: link state changed to DOWN [...] ix1: link state changed to UP [...] ix0: link state changed to UP [...] ix1: link state changed to DOWN [...] ix1: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd)