[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3200.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8170930176 (7792 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdc2e2000-0xdc2e201e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7030000-0xf703ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <100 Series/C230 Series Chipset Family KT Redirection> port 0xf0a0-0xf0a7 mem 0xf704d000-0xf704dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7048000-0xf7049fff,0xf704c000-0xf704c0ff,0xf704b000-0xf704b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0xf7040000-0xf7043fff,0xf7020000-0xf702ffff at device 31.3 on pci0 [...] em0: <Intel(R) I219-V SPT-H(2)> mem 0xf7000000-0xf701ffff at device 31.6 on pci0 [...] em0: EEPROM V0.8-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1595996974 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SK hynix SC308 SATA 128GB 30001P10> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <HGST HTS725050A7E630 GS2OA3C0> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2,ada1 in 'Slot 02', SATA Slot: scbus2 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C1> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <PixA USB Optical Mouse> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <SIGMACHIP USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/3.30, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 9 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc105 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 10 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=11, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 11 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc105 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 12 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 13 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=14, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 14 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 14 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=15, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 15 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 15 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 17 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=17, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 17 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 17 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=18, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 18 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 18 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=19, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 19 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc105 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 19 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc105 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 20 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4005 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus5 target 0 lun 1 [...] da1: <LGE U2 SD Card 0000> Removable Direct Access SCSI-2 device [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 21 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> detached [...] da1 at umass-sim0 bus 0 scbus5 target 0 lun 1 [...] da1: <LGE U2 SD Card 0000> detached [...] (da1:umass-sim0:0:0:1): Periph destroyed [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6322) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4005 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus5 target 0 lun 1 [...] da1: <LGE U2 SD Card 0000> Removable Direct Access SCSI-2 device [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 22 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> detached [...] da1 at umass-sim0 bus 0 scbus5 target 0 lun 1 [...] da1: <LGE U2 SD Card 0000> detached [...] (da1:umass-sim0:0:0:1): Periph destroyed [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=23, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 23 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 23 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <LGE U2 0000> detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 25 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=25, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 25 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 25 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc105 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 26 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=27, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 27 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=28, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 28 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 28 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=29, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 29 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 29 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 30 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=31, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 31 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 31 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=32, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 32 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 32 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=33, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 33 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 33 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=34, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 34 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 34 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=35, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 35 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 35 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=36, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 36 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 36 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=37, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 37 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 37 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=38, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 38 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 38 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=39, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 39 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 39 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=40, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 40 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 40 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 41 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=42, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 42 failed, USB_ERR_IOERROR [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 42 (disconnected) [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=43, set address failed! (USB_ERR_IOERROR, ignored) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 usbd_setup_device_desc: getting device descriptor at addr 43 failed, USB_ERR_IOERROR [...] 0 ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] 0 0 0 0 0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usbd_req_re_enumerate: addr=44, set address failed! (USB_ERR_IOERROR, ignored) [...] 0 0 usbd_setup_device_desc: getting device descriptor at addr 44 failed, USB_ERR_IOERROR [...] 0 ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umass0 on uhub0 [...] umass0: <Mass Storage> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] done [...] All buffers synced. [...] Uptime: 4m4s [...] ukbd0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1680x1050 [...] CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3200.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8170930176 (7792 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xdc2e2000-0xdc2e201e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xf7030000-0xf703ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <100 Series/C230 Series Chipset Family KT Redirection> port 0xf0a0-0xf0a7 mem 0xf704d000-0xf704dfff at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7048000-0xf7049fff,0xf704c000-0xf704c0ff,0xf704b000-0xf704b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0xf7040000-0xf7043fff,0xf7020000-0xf702ffff at device 31.3 on pci0 [...] em0: <Intel(R) I219-V SPT-H(2)> mem 0xf7000000-0xf701ffff at device 31.6 on pci0 [...] em0: EEPROM V0.8-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1595996921 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C1> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SK hynix SC308 SATA 128GB 30001P10> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada1: <HGST HTS725050A7E630 GS2OA3C0> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2,ada1 in 'Slot 02', SATA Slot: scbus2 target 0 [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <PixA USB Optical Mouse> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <SIGMACHIP USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/3.30, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> [...] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xf704a000-0xf704a0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xf704f000-0xf704ffff at device 20.2 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] drmn0: Incompatible option enable_guc=1 - GuC submission is N/A [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] VT: Replacing driver "efifb" with new "dummy". [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xde000000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-3 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-3 [...] [drm] - kern.vt.fb.default_mode [...] drmn0: successfully loaded firmware image 'i915/skl_dmc_ver1_27.bin' [...] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] drmn0: could not load firmware image 'i915/skl_guc_33.0.0.bin' [...] drmn0: GuC firmware i915/skl_guc_33.0.0.bin: fetch failed with error -2 [...] drmn0: GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [...] drmn0: GuC is uninitialized [...] drmn0: Failed to program MOCS registers; expect performance issues. [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "dummy" with new "fb". [...] start FB_INFO: [...] type=11 height=1050 width=1680 depth=32 [...] cmsize=16 size=7057408 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=6720 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] lo0: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] ums0 on uhub0 [...] ums0: <PixA USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device LGE LGE U2 USB Device (0x1004:0x6321) [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <CDC Abstract Control Model (ACM)> on usbus0 [...] umodem0: data interface 1, has no CM over data, has no break [...] uhid0 on uhub0 [...] uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/3.30, addr 2> on usbus0 [...] ugen0.4: <LGE LGE U2 USB Device> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 5 (disconnected) [...] umodem0: detached