Probe #bccac8e3bb of Gigabyte MX33-BS1-V1
Log: dmesg
[...] ---<<BOOT>>---
[...] Copyright (c) 04B8-B51F The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64
[...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
[...] VT(efifb): resolution 1024x768
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.21-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33241489408 (31701 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 2 3 6 7 10 8 9 11 4 5
[...] Timecounter "TSC-low" frequency 1752102616 Hz quality 1000
[...] random: entropy device external interface
[...] kbd0 at kbdmux0
[...] 000.000023 [4336] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] Root mount waiting for: usbus0
[...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0
[...] uhub1 on uhub0
[...] uhub1: <7-port Hub> on usbus0
[...] Root mount waiting for: usbus0
[...] uhub1: 5 ports with 5 removable, self powered
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0
[...] umass0 on uhub1
[...] umass0: <Virtual Cdrom> on usbus0
[...] umass0: SCSI over Bulk-Only; quirks = 0x0100
[...] umass0:7:0: Attached to scbus7
[...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0
[...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 40.000MB/s transfers
[...] cd0: Attempt to query device size failed: NOT READY, Medium not present
[...] cd0: quirks=0x10<10_BYTE_ONLY>
[...] Root mount waiting for: usbus0
[...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0
[...] umass1 on uhub1
[...] umass1: <Virtual HardDisk> on usbus0
[...] umass1: SCSI over Bulk-Only; quirks = 0x0100
[...] umass1:8:1: Attached to scbus8
[...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0
[...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device
[...] da0: Serial Number...
[...] da0: 40.000MB/s transfers
[...] da0: Attempt to query device size failed: NOT READY, Medium not present
[...] da0: quirks=0x2<NO_6_BYTE>
[...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0
[...] ukbd0 on uhub1
[...] ukbd0: <Keyboard Interface> on usbus0
[...] kbd1 at ukbd0
[...] lo0: link state changed to UP
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] urndis0 on uhub1
[...] urndis0: <RNDIS Notification Interface> on usbus0
[...] ue0: <USB Ethernet> on urndis0
[...] ue0: Ethernet address: ...
[...] ums0 on uhub1
[...] ums0: <Mouse Interface> on usbus0
[...] ums0: 3 buttons and [Z] coordinates ID=0
[...] ix0: link state changed to UP
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 2m22s
[...] ---<<BOOT>>---
[...] Copyright (c) 04B8-B51F The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64
[...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
[...] VT(efifb): resolution 1024x768
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.22-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33241489408 (31701 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 10 11 6 7 4 5 8 9 2 3
[...] Timecounter "TSC-low" frequency 1752112046 Hz quality 1000
[...] random: entropy device external interface
[...] kbd0 at kbdmux0
[...] 000.000023 [4336] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] Root mount waiting for: usbus0
[...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0
[...] uhub1 on uhub0
[...] uhub1: <7-port Hub> on usbus0
[...] Root mount waiting for: usbus0
[...] uhub1: 5 ports with 5 removable, self powered
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0
[...] umass0 on uhub1
[...] umass0: <Virtual Cdrom> on usbus0
[...] umass0: SCSI over Bulk-Only; quirks = 0x0100
[...] umass0:7:0: Attached to scbus7
[...] cd0 at umass-sim0 bus 0 scbus7 target 0 lun 0
[...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 40.000MB/s transfers
[...] cd0: Attempt to query device size failed: NOT READY, Medium not present
[...] cd0: quirks=0x10<10_BYTE_ONLY>
[...] Root mount waiting for: usbus0
[...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0
[...] umass1 on uhub1
[...] umass1: <Virtual HardDisk> on usbus0
[...] umass1: SCSI over Bulk-Only; quirks = 0x0100
[...] umass1:8:1: Attached to scbus8
[...] da0 at umass-sim1 bus 1 scbus8 target 0 lun 0
[...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device
[...] da0: Serial Number...
[...] da0: 40.000MB/s transfers
[...] da0: Attempt to query device size failed: NOT READY, Medium not present
[...] da0: quirks=0x2<NO_6_BYTE>
[...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0
[...] ukbd0 on uhub1
[...] ukbd0: <Keyboard Interface> on usbus0
[...] kbd1 at ukbd0
[...] lo0: link state changed to UP
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] urndis0 on uhub1
[...] urndis0: <RNDIS Notification Interface> on usbus0
[...] ue0: <USB Ethernet> on urndis0
[...] ue0: Ethernet address: ...
[...] ums0 on uhub1
[...] ums0: <Mouse Interface> on usbus0
[...] ums0: 3 buttons and [Z] coordinates ID=0
[...] ix0: link state changed to UP
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 4m42s
[...] ---<<BOOT>>---
[...] Copyright (c) 2474-67F5 The HardenedBSD Project.
[...] Copyright (c) 7B0E-C7D4 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021
[...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
[...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[...] VT(efifb): resolution 1024x768
[...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.28-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,GFNI,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33238237184 (31698 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 8 9 10 2 3 11 4 5 6 7
[...] Timecounter "TSC-low" frequency 1752139310 Hz quality 1000
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd0 at kbdmux0
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] 000.000062 [4344] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
[...] device_attach: ahciem0 attach returned 6
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) X550-T2> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) X550-T2> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0
[...] uhub1 on uhub0
[...] uhub1: <7-port Hub> on usbus0
[...] Root mount waiting for: usbus0
[...] uhub1: 5 ports with 5 removable, self powered
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0
[...] umass0 on uhub1
[...] umass0: <Virtual Cdrom> on usbus0
[...] umass0: SCSI over Bulk-Only; quirks = 0x0100
[...] umass0:6:0: Attached to scbus6
[...] cd0 at umass-sim0 bus 0 scbus6 target 0 lun 0
[...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 40.000MB/s transfers
[...] cd0: Attempt to query device size failed: NOT READY, Medium not present
[...] cd0: quirks=0x10<10_BYTE_ONLY>
[...] Root mount waiting for: usbus0
[...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0
[...] umass1 on uhub1
[...] umass1: <Virtual HardDisk> on usbus0
[...] umass1: SCSI over Bulk-Only; quirks = 0x0100
[...] umass1:7:1: Attached to scbus7
[...] da0 at umass-sim1 bus 1 scbus7 target 0 lun 0
[...] da0: <AMI Virtual HDisk0 1.00> Removable Direct Access SCSI device
[...] da0: Serial Number...
[...] da0: 40.000MB/s transfers
[...] da0: Attempt to query device size failed: NOT READY, Medium not present
[...] da0: quirks=0x2<NO_6_BYTE>
[...] ugen0.5: <American Megatrends Inc. Virtual Ethernet> at usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.6: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0
[...] ukbd0 on uhub1
[...] ukbd0: <Keyboard Interface> on usbus0
[...] kbd1 at ukbd0
[...] urndis0 on uhub1
[...] urndis0: <RNDIS Notification Interface> on usbus0
[...] ue0: <USB Ethernet> on urndis0
[...] ue0: Ethernet address: ...
[...] ums0 on uhub1
[...] ums0: <Mouse Interface> on usbus0
[...] ums0: 3 buttons and [Z] coordinates ID=0
[...] ix0: link state changed to UP
[...] ix1: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix1: link state changed to DOWN
[...] ix0: link state changed to UP
[...] ix1: link state changed to UP
[...] lo0: link state changed to UP
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 13m22s
[...] ---<<BOOT>>---
[...] Copyright (c) 2474-67F5 The HardenedBSD Project.
[...] Copyright (c) 7B0E-C7D4 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021
[...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
[...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[...] VT(efifb): resolution 1024x768
[...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.28-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,GFNI,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33238237184 (31698 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 10 11 4 5 8 9 6 7 2 3
[...] Timecounter "TSC-low" frequency 1752142110 Hz quality 1000
[...] random: entropy device external interface
[...] wlan: mac acl policy registered
[...] kbd0 at kbdmux0
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] 000.000062 [4344] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
[...] device_attach: ahciem0 attach returned 6
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) X550-T2> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) X550-T2> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0
[...] uhub1 on uhub0
[...] uhub1: <7-port Hub> on usbus0
[...] Root mount waiting for: usbus0
[...] uhub1: 5 ports with 5 removable, self powered
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0
[...] umass0 on uhub1
[...] umass0: <Virtual Cdrom> on usbus0
[...] umass0: SCSI over Bulk-Only; quirks = 0x0100
[...] umass0:6:0: Attached to scbus6
[...] cd0 at umass-sim0 bus 0 scbus6 target 0 lun 0
[...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 40.000MB/s transfers
[...] cd0: Attempt to query device size failed: NOT READY, Medium not present
[...] cd0: quirks=0x10<10_BYTE_ONLY>
[...] Root mount waiting for: usbus0
[...] usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
[...] Root mount waiting for: usbus0
[...] usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
[...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 2, addr 3 (ignored)
[...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0
[...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 (disconnected)
[...] uhub1: at uhub0, port 9, addr 1 (disconnected)
[...] ugen0.3: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 (disconnected)
[...] umass0: at uhub1, port 1, addr 2 (disconnected)
[...] cd0 at umass-sim0 bus 0 scbus6 target 0 lun 0
[...] cd0: <AMI Virtual CDROM0 1.00> s/n ... detached
[...] (cd0:umass-sim0:0:0:0): Periph destroyed
[...] umass0: detached
[...] ugen0.4: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 (disconnected)
[...] uhub1: detached
[...] lo0: link state changed to UP
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 41m43s
[...] ---<<BOOT>>---
[...] Copyright (c) 2474-67F5 The HardenedBSD Project.
[...] Copyright (c) 7B0E-C7D4 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021
[...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
[...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[...] VT(efifb): resolution 1024x768
[...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.20-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,GFNI,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33238237184 (31698 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 6 7 9 8 4 5 2 3 10 11
[...] Timecounter "TSC-low" frequency 1752098969 Hz quality 1000
[...] random: entropy device external interface
[...] wlan: mac acl policy registered
[...] kbd0 at kbdmux0
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] 000.000062 [4344] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
[...] device_attach: ahciem0 attach returned 6
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) X550-T2> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) X550-T2> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] lo0: link state changed to UP
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 9m21s
[...] ---<<BOOT>>---
[...] Copyright (c) 2474-67F5 The HardenedBSD Project.
[...] Copyright (c) 7B0E-C7D4 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021
[...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
[...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[...] VT(efifb): resolution 1024x768
[...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.28-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,GFNI,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33238237184 (31698 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 2 3 8 9 6 7 10 11 4 5
[...] Timecounter "TSC-low" frequency 1752139078 Hz quality 1000
[...] random: entropy device external interface
[...] wlan: mac acl policy registered
[...] kbd0 at kbdmux0
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] 000.000062 [4344] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
[...] device_attach: ahciem0 attach returned 6
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) X550-T2> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) X550-T2> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] Root mount waiting for: usbus0
[...] lo0: link state changed to UP
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] nd6_dad_timer: called with non-tentative address XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX(ix0)
[...] pflog0: permanently promiscuous mode enabled
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 0 0 0 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
[...] All buffers synced.
[...] Uptime: 6m27s
[...] ---<<BOOT>>---
[...] Copyright (c) 2474-67F5 The HardenedBSD Project.
[...] Copyright (c) 7B0E-C7D4 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021
[...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
[...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
[...] VT(efifb): resolution 1024x768
[...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
[...] CPU: Intel(R) Xeon(R) E-2386G CPU @ 3.50GHz (3504.26-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0xa0671 Family=0x6 Model=0xa7 Stepping=1
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0xf2bf67ef<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
[...] Structured Extended Features2=0x40405f4e<AVX512VBMI,UMIP,PKU,GFNI,RDPID,SGXLC>
[...] Structured Extended Features3=0xbc000410<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0xc6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33238237184 (31698 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119 on motherboard
[...] Launching APs: 1 10 6 7 11 4 5 8 9 2 3
[...] Timecounter "TSC-low" frequency 1752128482 Hz quality 1000
[...] random: entropy device external interface
[...] wlan: mac acl policy registered
[...] kbd0 at kbdmux0
[...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] 000.000062 [4344] netmap_init netmap: loaded module
[...] [ath_hal] loaded
[...] nexus0
[...] efirtc0: <EFI Realtime Clock> on motherboard
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] cryptosoft0: <software crypto> on motherboard
[...] acpi0: <ALASKA A M I > on motherboard
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 350
[...] Event timer "HPET1" frequency 24000000 Hz quality 340
[...] Event timer "HPET2" frequency 24000000 Hz quality 340
[...] Event timer "HPET3" frequency 24000000 Hz quality 340
[...] Event timer "HPET4" frequency 24000000 Hz quality 340
[...] Event timer "HPET5" frequency 24000000 Hz quality 340
[...] Event timer "HPET6" frequency 24000000 Hz quality 340
[...] Event timer "HPET7" frequency 24000000 Hz quality 340
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] nvme0: <Generic NVMe Device> mem 0xa3300000-0xa3303fff irq 16 at device 0.0 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] nvme1: <Generic NVMe Device> mem 0xa3200000-0xa3203fff irq 16 at device 0.0 on pci2
[...] pci0: <simple comms, UART> at device 18.0 (no driver attached)
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa3400000-0xa340ffff irq 16 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] pci0: <simple comms> at device 22.1 (no driver attached)
[...] pci0: <simple comms> at device 22.4 (no driver attached)
[...] ahci0: <AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa3424000-0xa3425fff,0xa3428000-0xa34280ff,0xa3427000-0xa34277ff irq 16 at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
[...] device_attach: ahciem0 attach returned 6
[...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] ix0: <Intel(R) X550-T2> mem 0xa2800000-0xa2bfffff,0xa3104000-0xa3107fff irq 16 at device 0.0 on pci3
[...] ix0: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix0: Using 6 RX queues 6 TX queues
[...] ix0: Using MSI-X interrupts with 7 vectors
[...] ix0: allocated for 6 queues
[...] ix0: allocated for 6 rx queues
[...] ix0: Ethernet address: ...
[...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048
[...] ix1: <Intel(R) X550-T2> mem 0xa2400000-0xa27fffff,0xa3100000-0xa3103fff irq 17 at device 0.1 on pci3
[...] ix1: Using 2048 TX descriptors and 2048 RX descriptors
[...] ix1: Using 6 RX queues 6 TX queues
[...] ix1: Using MSI-X interrupts with 7 vectors
[...] ix1: allocated for 6 queues
[...] ix1: allocated for 6 rx queues
[...] ix1: Ethernet address: ...
[...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4
[...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048
[...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci4
[...] pci5: <ACPI PCI bus> on pcib5
[...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa1ffffff,0xa2000000-0xa201ffff irq 16 at device 0.0 on pci5
[...] vgapci0: Boot video device
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] acpi_syscontainer1: <System Container> on acpi0
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] Timecounters tick every 1.000 msec
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] nvd0: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd0: 488386MB (1000215216 512 byte sectors)
[...] nvd1: <SAMSUNG MZVL2512HCJQ-00B07> NVMe namespace
[...] nvd1: 488386MB (1000215216 512 byte sectors)
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] Root mount waiting for: usbus0
[...] Root mount waiting for: usbus0
[...] uhub0: 22 ports with 22 removable, self powered
[...] lo0: link state changed to UP
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] ix0: link state changed to UP
[...] ix0: link state changed to DOWN
[...] ix0: link state changed to UP
[...] nd6_dad_timer: called with non-tentative address XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX(ix0)
[...] pflog0: permanently promiscuous mode enabled