[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248026-85b720c1ce9 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Atom(TM) CPU C3758 @ 2.20GHz (2200.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16548339712 (15781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL TIANO > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 6 1 2 7 5 4 3 [...] Timecounter "TSC-low" frequency 1100035291 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] qat0: <Intel C3000 QuickAssist PF> mem 0xdf540000-0xdf57ffff,0xdf500000-0xdf53ffff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> mem 0xdf640000-0xdf65ffff at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0xdc800000-0xdcffffff,0xdd008000-0xdd00ffff at device 0.0 on pci2 [...] ixl0: fw 6.0.48442 api 1.7 nvm 6.01 etid 800035cf oem 1.262.0 [...] ixl0: PF-ID[0]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 8 RX queues 8 TX queues [...] ixl0: Using MSI-X interrupts with 9 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0xdc000000-0xdc7fffff,0xdd000000-0xdd007fff at device 0.1 on pci2 [...] ixl1: fw 6.0.48442 api 1.7 nvm 6.01 etid 800035cf oem 1.262.0 [...] ixl1: PF-ID[1]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 8 RX queues 8 TX queues [...] ixl1: Using MSI-X interrupts with 9 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib3: <ACPI PCI-PCI bridge> mem 0xdf620000-0xdf63ffff at device 16.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xdf300000-0xdf303fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> mem 0xdf600000-0xdf61ffff at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff at device 0.0 on pci5 [...] ahci0: <Intel Denverton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe040-0xe05f mem 0xdf676000-0xdf677fff,0xdf67d000-0xdf67d0ff,0xdf67c000-0xdf67c7ff at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahci1: <Intel Denverton AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf674000-0xdf675fff,0xdf67b000-0xdf67b0ff,0xdf67a000-0xdf67a7ff at device 20.0 on pci0 [...] ahci1: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich11: <AHCI channel> at channel 3 on ahci1 [...] ahcich12: <AHCI channel> at channel 4 on ahci1 [...] ahcich13: <AHCI channel> at channel 5 on ahci1 [...] ahcich14: <AHCI channel> at channel 6 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf660000-0xdf66ffff at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ix0: <Intel(R) X553 (1GbE)> mem 0xdda00000-0xddbfffff,0xddc04000-0xddc07fff at device 0.0 on pci6 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: Full [...] ixl0: link state changed to UP [...] ix0: eTrack 0x80000877 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] debugnet_any_ifnet_update: Bad dn_init result from ixl0 (ifp 0xfffff8000753d800), ignoring. [...] ix1: <Intel(R) X553 (1GbE)> mem 0xdd800000-0xdd9fffff,0xddc00000-0xddc03fff at device 0.1 on pci6 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: eTrack 0x80000877 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib7: <ACPI PCI-PCI bridge> at device 23.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ix2: <Intel(R) X553 (1GbE)> mem 0xdd400000-0xdd5fffff,0xdd604000-0xdd607fff at device 0.0 on pci7 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 8 RX queues 8 TX queues [...] ix2: Using MSI-X interrupts with 9 vectors [...] ix2: allocated for 8 queues [...] ix2: allocated for 8 rx queues [...] ix2: Ethernet address: ... [...] ix2: eTrack 0x8000087c [...] ix2: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix3: <Intel(R) X553 (1GbE)> mem 0xdd200000-0xdd3fffff,0xdd600000-0xdd603fff at device 0.1 on pci7 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 8 RX queues 8 TX queues [...] ix3: Using MSI-X interrupts with 9 vectors [...] ix3: allocated for 8 queues [...] ix3: allocated for 8 rx queues [...] ix3: Ethernet address: ... [...] ix3: eTrack 0x8000087c [...] ix3: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pci0: <simple comms> at device 24.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <ADATA SX8200PNP> NVMe namespace [...] nvd0: 1953514MB (4000797360 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus13 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ada0 at ahcich14 bus 0 scbus12 target 0 lun 0 [...] ada0: <SuperMicro SSD SOB20R> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 60416MB (123731968 512 byte sectors) [...] ses1: ada0,pass1 in 'Slot 06', SATA Slot: scbus12 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:14:0: Attached to scbus14 [...] da0 at umass-sim0 bus 0 scbus14 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 58680MB (120176640 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub2: 4 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0 [...] uhub3: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Dual Console: Video Primary, Serial Secondary [...] ichsmb0: <Intel Denverton SMBus controller> port 0xe000-0xe01f mem 0xdf678000-0xdf6780ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub2 [...] ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] ixl0: link state changed to DOWN [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: Full [...] ixl0: link state changed to UP [...] ix0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ix1: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on ix0 [...] ix2: link state changed to UP