[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE r354233 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (3591.75-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8197369856 (7817 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1795877056 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000024 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7d14000-0xf7d17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418AS CC6B> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD-RW DH16AFSH DL31> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ada1 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada1: <ST500LM021-1KJ152 0002LIM1> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 17 ports with 17 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen0.2: <CHICONY USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY USB Keyboard, class 0/0, rev 1.10/1.03, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <Generic USB2.0-CRW> at usbus0 [...] umass0 on uhub1 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic- Multi-Card 1.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] PipeC fused off [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0081000 vbase=0xfffff800e0081000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ugen0.4: <vendor 0x0a12 product 0x0001> at usbus0 [...] ugen0.5: <vendor 0x1a40 USB 2.0 Hub MTT> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 4> on usbus0 [...] uhub5: MTT enabled [...] uhub5: 7 ports with 7 removable, self powered [...] ugen0.6: <vendor 0x04b3 product 0x310b> at usbus0 [...] ums0 on uhub1 [...] ums0: <CHICONY USB Keyboard, class 0/0, rev 1.10/1.03, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ums1 on uhub5 [...] ums1: <vendor 0x04b3 product 0x310b, class 0/0, rev 2.00/1.60, addr 5> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] ubt0 on uhub1 [...] ubt0: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/75.58, addr 3> on usbus0 [...] re0: link state changed to UP [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen0.7: <Samsung Electronics Co., Ltd. SCX-3200 Series> at usbus0 [...] ulpt0 on uhub1 [...] ulpt0: <Samsung Electronics Co., Ltd. SCX-3200 Series, class 0/0, rev 2.00/1.00, addr 6> on usbus0 [...] ulpt0: using bi-directional mode [...] ulpt0: output error [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Unexpected unsolicited response from address 0: 00000000 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Reset setting timeout [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Reset setting timeout [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] hdac0: Command timeout on address 0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 9 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE r354233 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (3591.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8197369856 (7817 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1795880946 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000024 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7d14000-0xf7d17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 17 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500418AS CC6B> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada1: <ST500LM021-1KJ152 0002LIM1> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PLDS DVD-RW DH16AFSH DL31> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 17 ports with 17 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen0.2: <CHICONY USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CHICONY USB Keyboard, class 0/0, rev 1.10/1.03, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.3: <Generic USB2.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic- Multi-Card 1.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] PipeC fused off [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd200000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0081000 vbase=0xfffff800e0081000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] ugen0.4: <vendor 0x0a12 product 0x0001> at usbus0 [...] lo0: link state changed to UP [...] ugen0.5: <Samsung Electronics Co., Ltd. SCX-3200 Series> at usbus0 [...] re0: link state changed to DOWN [...] ugen0.6: <vendor 0x1a40 USB 2.0 Hub MTT> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 5> on usbus0 [...] uhub5: MTT enabled [...] uhub5: 7 ports with 7 removable, self powered [...] ugen0.7: <vendor 0x04b3 product 0x310b> at usbus0 [...] ums0 on uhub0 [...] ums0: <CHICONY USB Keyboard, class 0/0, rev 1.10/1.03, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ums1 on uhub5 [...] ums1: <vendor 0x04b3 product 0x310b, class 0/0, rev 2.00/1.60, addr 6> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] ubt0 on uhub0 [...] ubt0: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/75.58, addr 3> on usbus0 [...] re0: link state changed to UP [...] ulpt0 on uhub0 [...] ulpt0: <Samsung Electronics Co., Ltd. SCX-3200 Series, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] ulpt0: using bi-directional mode [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd)