[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz (1598.25-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34358689792 (32767 MB) [...] avail memory = 33190875136 (31653 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 2 3 5 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HP ProLiant> [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] igb0: <Intel(R) I350 (Copper)> mem 0x93100000-0x931fffff,0x9320c000-0x9320ffff at device 0.0 numa-domain 0 on pci4 [...] igb0: EEPROM V1.63-0 eTrack 0x80000cbc [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0x93000000-0x930fffff,0x93208000-0x9320bfff at device 0.1 numa-domain 0 on pci4 [...] igb1: EEPROM V1.63-0 eTrack 0x80000cbc [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0x92f00000-0x92ffffff,0x93204000-0x93207fff at device 0.2 numa-domain 0 on pci4 [...] igb2: EEPROM V1.63-0 eTrack 0x80000cbc [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0x92e00000-0x92efffff,0x93200000-0x93203fff at device 0.3 numa-domain 0 on pci4 [...] igb3: EEPROM V1.63-0 eTrack 0x80000cbc [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci1 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci1 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci1 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci1 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci1 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] ciss0: <HP Smart Array H240> port 0x2000-0x20ff mem 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on pci10 [...] ciss0: PERFORMANT Transport [...] pcib11: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci1 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pci1: <unknown> at device 17.0 (no driver attached) [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93302000-0x933023ff at device 26.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci1 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci13 [...] vgapci0: Boot video device [...] uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci13 [...] usbus2 numa-domain 0 on uhci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] pcib14: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci1 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] bge0: <HP Ethernet 1Gb 2-port 330i Adapter, ASIC rev. 0x5720000> mem 0x92b30000-0x92b3ffff,0x92b40000-0x92b4ffff,0x92b50000-0x92b5ffff at device 0.0 numa-domain 0 on pci14 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <HP Ethernet 1Gb 2-port 330i Adapter, ASIC rev. 0x5720000> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff at device 0.1 numa-domain 0 on pci14 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93301000-0x933013ff at device 29.0 numa-domain 0 on pci1 [...] usbus3: EHCI version 1.0 [...] usbus3 numa-domain 0 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3058-0x305f,0x307c-0x307f,0x3050-0x3057,0x3078-0x307b,0x3020-0x303f mem 0x93300000-0x933007ff at device 31.2 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 174300000c00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 176b00000c00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 176b00000c00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 176b00000c00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 176b00000c00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 176b00000c00 [...] device_attach: est5 attach returned 6 [...] Timecounter "TSC" frequency 1598148733 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich5 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTEL SSDSA2BW120G3 4PC10362> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 98304MB (201326592 512 byte sectors) [...] ses0: ada0,pass1 in 'Slot 05', SATA Slot: scbus2 target 0 [...] da0 at ciss0 bus 32 scbus1 target 5 lun 0 [...] da0: <SEAGATE ST4000NM0023 GS0D> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 135.168MB/s transfers [...] da0: Command Queueing enabled [...] da0: 3815447MB (7814037168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <HP UHCI root HUB> at usbus2 [...] uhub0 numa-domain 0 on usbus3 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1 numa-domain 0 on usbus2 [...] uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub2 numa-domain 0 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub3 numa-domain 0 on usbus0 [...] uhub3: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus3 [...] ugen0.2: <vendor 0x0424 product 0x2660> at usbus0 [...] uhub4 numa-domain 0 on uhub3 [...] uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub5 numa-domain 0 on uhub2 [...] uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8002> at usbus3 [...] uhub6 numa-domain 0 on uhub0 [...] uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 2 ports with 1 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen0.3: <LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus0 [...] kbd2 at ukbd0