[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p14-HBSD #0 e10a7efcee1(stable/21.1)-dirty: Mon Mar 8 14:52:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2593.55-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: (disabled in BIOS) HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4060033024 (3871 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <IntelR AWRDACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1296774316 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <IntelR AWRDACPI> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfd000000-0xfd3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfd800000-0xfd8fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x8f00-0x8f1f mem 0xfd7c0000-0xfd7dffff,0xfd7fc000-0xfd7fffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0x7f00-0x7f1f mem 0xfd6c0000-0xfd6dffff,0xfd6fc000-0xfd6fffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) PRO/1000 Network Connection> port 0x6f00-0x6f1f mem 0xfd5c0000-0xfd5dffff,0xfd5fc000-0xfd5fffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib4: [GIANT-LOCKED] [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) PRO/1000 Network Connection> port 0xdf00-0xdf1f mem 0xfdec0000-0xfdedffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pcib5: [GIANT-LOCKED] [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) PRO/1000 Network Connection> port 0xcf00-0xcf1f mem 0xfddc0000-0xfdddffff,0xfddfc000-0xfddfffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pcib6: [GIANT-LOCKED] [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> mem 0xfdce0000-0xfdcfffff irq 17 at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 18 at device 1.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] em5: <Intel(R) PRO/1000 Network Connection> port 0xbf00-0xbf1f mem 0xfdbc0000-0xfdbdffff,0xfdbfc000-0xfdbfffff irq 18 at device 0.0 on pci8 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 17 at device 4.0 on pci7 [...] pci9: <PCI bus> on pcib9 [...] em6: <Intel(R) PRO/1000 Network Connection> port 0xaf00-0xaf1f mem 0xfdac0000-0xfdadffff,0xfdafc000-0xfdafffff irq 17 at device 0.0 on pci9 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> irq 18 at device 5.0 on pci7 [...] pci10: <PCI bus> on pcib10 [...] em7: <Intel(R) PRO/1000 Network Connection> port 0x9f00-0x9f1f mem 0xfd9c0000-0xfd9dffff,0xfd9fc000-0xfd9fffff irq 18 at device 0.0 on pci10 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pcib11: failed to allocate initial memory window: 0-0xfffff [...] pci11: <ACPI PCI bus> on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf800-0xf80f at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH7 AHCI SATA controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf30f mem 0xfdffc000-0xfdffc3ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xef000-0xeffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2406000d24 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2406000d24 [...] device_attach: est1 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen4.2: <vendor 0x05e3 USB2.0 Hub> at usbus4 [...] uhub5 on uhub4 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus4 [...] Root mount waiting for: usbus4 [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen4.3: <GASIA PS2toUSB Adapter> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.4: <SanDisk Ultra> at usbus4 [...] umass0 on uhub4 [...] umass0: <SanDisk Ultra, class 0/0, rev 2.10/1.00, addr 4> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 117360MB (240353280 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] WARNING: /mnt was not properly dismounted [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em4: link state changed to UP [...] ums0 on uhub5 [...] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus4 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em0: link state changed to DOWN [...] em4: link state changed to DOWN [...] em1: link state changed to DOWN [...] em4: link state changed to UP [...] em1: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 5d20h10m4s [...] ukbd0: detached [...] ums0: detached [...] uhub5: detached [...] umass0: detached [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub0 on uhub2 [...] uhub0: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus0 [...] uhub0: 4 ports with 4 removable, self powered [...] ugen0.3: <GASIA PS2toUSB Adapter> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub0 [...] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] ugen0.4: <SanDisk Ultra> at usbus0 [...] umass0 on uhub2 [...] umass0: <SanDisk Ultra, class 0/0, rev 2.10/1.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] ukbd0: detached [...] ums0: detached [...] uhub0: detached [...] (da0:umass-sim0:0:0:0): got CAM status 0x44 [...] (da0:umass-sim0:0:0:0): fatal error, failed to attach to device [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 b531d3958f5(stable/21.1)-dirty: Tue Apr 20 11:00:08 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2593.55-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: (disabled in BIOS) HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4060033024 (3871 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <IntelR AWRDACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 4 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1296774531 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <IntelR AWRDACPI> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfd000000-0xfd3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfd800000-0xfd8fffff at device 2.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x8f00-0x8f1f mem 0xfd7c0000-0xfd7dffff,0xfd7fc000-0xfd7fffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib2 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0x7f00-0x7f1f mem 0xfd6c0000-0xfd6dffff,0xfd6fc000-0xfd6fffff irq 17 at device 0.0 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci3: <ACPI PCI bus> on pcib3 [...] em2: <Intel(R) PRO/1000 Network Connection> port 0x6f00-0x6f1f mem 0xfd5c0000-0xfd5dffff,0xfd5fc000-0xfd5fffff irq 18 at device 0.0 on pci3 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using 2 RX queues 2 TX queues [...] em2: Using MSI-X interrupts with 3 vectors [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib4: [GIANT-LOCKED] [...] pci4: <ACPI PCI bus> on pcib4 [...] em3: <Intel(R) PRO/1000 Network Connection> port 0xdf00-0xdf1f mem 0xfdec0000-0xfdedffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci4 [...] em3: Using 1024 TX descriptors and 1024 RX descriptors [...] em3: Using 2 RX queues 2 TX queues [...] em3: Using MSI-X interrupts with 3 vectors [...] em3: Ethernet address: ... [...] em3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pcib5: [GIANT-LOCKED] [...] pci5: <ACPI PCI bus> on pcib5 [...] em4: <Intel(R) PRO/1000 Network Connection> port 0xcf00-0xcf1f mem 0xfddc0000-0xfdddffff,0xfddfc000-0xfddfffff irq 16 at device 0.0 on pci5 [...] em4: Using 1024 TX descriptors and 1024 RX descriptors [...] em4: Using 2 RX queues 2 TX queues [...] em4: Using MSI-X interrupts with 3 vectors [...] em4: Ethernet address: ... [...] em4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pcib6: [GIANT-LOCKED] [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> mem 0xfdce0000-0xfdcfffff irq 17 at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 18 at device 1.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] em5: <Intel(R) PRO/1000 Network Connection> port 0xbf00-0xbf1f mem 0xfdbc0000-0xfdbdffff,0xfdbfc000-0xfdbfffff irq 18 at device 0.0 on pci8 [...] em5: Using 1024 TX descriptors and 1024 RX descriptors [...] em5: Using 2 RX queues 2 TX queues [...] em5: Using MSI-X interrupts with 3 vectors [...] em5: Ethernet address: ... [...] em5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <PCI-PCI bridge> irq 17 at device 4.0 on pci7 [...] pci9: <PCI bus> on pcib9 [...] em6: <Intel(R) PRO/1000 Network Connection> port 0xaf00-0xaf1f mem 0xfdac0000-0xfdadffff,0xfdafc000-0xfdafffff irq 17 at device 0.0 on pci9 [...] em6: Using 1024 TX descriptors and 1024 RX descriptors [...] em6: Using 2 RX queues 2 TX queues [...] em6: Using MSI-X interrupts with 3 vectors [...] em6: Ethernet address: ... [...] em6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> irq 18 at device 5.0 on pci7 [...] pci10: <PCI bus> on pcib10 [...] em7: <Intel(R) PRO/1000 Network Connection> port 0x9f00-0x9f1f mem 0xfd9c0000-0xfd9dffff,0xfd9fc000-0xfd9fffff irq 18 at device 0.0 on pci10 [...] em7: Using 1024 TX descriptors and 1024 RX descriptors [...] em7: Using 2 RX queues 2 TX queues [...] em7: Using MSI-X interrupts with 3 vectors [...] em7: Ethernet address: ... [...] em7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pcib11: failed to allocate initial memory window: 0-0xfffff [...] pci11: <ACPI PCI bus> on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf800-0xf80f at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH7 AHCI SATA controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf30f mem 0xfdffc000-0xfdffc3ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xef000-0xeffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2406000d24 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 6160d2406000d24 [...] device_attach: est1 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub4: 8 ports with 8 removable, self powered [...] ugen4.2: <vendor 0x05e3 USB2.0 Hub> at usbus4 [...] uhub5 on uhub4 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus4 [...] Root mount waiting for: usbus4 [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen4.3: <GASIA PS2toUSB Adapter> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.4: <SanDisk Ultra> at usbus4 [...] umass0 on uhub4 [...] umass0: <SanDisk Ultra, class 0/0, rev 2.10/1.00, addr 4> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 117360MB (240353280 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em4: link state changed to UP [...] ums0 on uhub5 [...] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus4 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em0: link state changed to DOWN [...] em4: link state changed to DOWN [...] em1: link state changed to DOWN [...] em4: link state changed to UP [...] em1: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled