[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz (2700.11-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66761302016 (63668 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs [...] FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 45 43 27 4 30 20 15 34 3 44 32 17 42 22 25 26 29 6 41 46 37 35 21 39 23 2 1 40 16 12 10 11 7 36 24 38 18 8 9 31 5 47 28 14 13 33 19 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] igb0: <Intel(R) I350 (Copper)> port 0x8020-0x803f mem 0xdfe20000-0xdfe3ffff,0xdfe44000-0xdfe47fff irq 27 at device 0.0 numa-domain 0 on pci2 [...] igb0: EEPROM V1.61-0 eTrack 0x8000090e [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x8000-0x801f mem 0xdfe00000-0xdfe1ffff,0xdfe40000-0xdfe43fff irq 30 at device 0.1 numa-domain 0 on pci2 [...] igb1: EEPROM V1.61-0 eTrack 0x8000090e [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm0: could not read firmware iwm7265Dfw (error 0) [...] device_attach: iwm0 attach returned 6 [...] pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xdfc00000-0xdfc07fff irq 40 at device 0.0 numa-domain 0 on pci4 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x7000-0x70ff mem 0x380fffc7c000-0x380fffc7ffff,0x380fff800000-0x380fffbfffff irq 16 at device 0.0 numa-domain 0 on pci5 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdff02000-0xdff023ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdff01000-0xdff013ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9070-0x9077,0x9060-0x9063,0x9050-0x9057,0x9040-0x9043,0x9020-0x903f mem 0xdff00000-0xdff007ff irq 19 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci7: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.5 (no driver attached) [...] pci7: <dasp, performance counters> at device 28.1 (no driver attached) [...] pcib8: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 51 at device 1.0 numa-domain 1 on pci8 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci8 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xfbe00000-0xfbe03fff irq 56 at device 0.0 numa-domain 1 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci8 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <PCI-PCI bridge> mem 0xfbd00000-0xfbd03fff irq 64 at device 0.0 numa-domain 1 on pci12 [...] pci13: <PCI bus> numa-domain 1 on pcib13 [...] pcib14: <PCI-PCI bridge> irq 64 at device 0.0 numa-domain 1 on pci13 [...] pci14: <PCI bus> numa-domain 1 on pcib14 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x381fe0000000-0x381fefffffff,0x381ff0000000-0x381ff01fffff,0xfbc00000-0xfbc7ffff irq 64 at device 0.0 numa-domain 1 on pci14 [...] hdac0: <ATI (0xaaf8) HDA Controller> mem 0xfbca0000-0xfbca3fff irq 68 at device 0.1 numa-domain 1 on pci14 [...] pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 1 on pcib15 [...] pci15: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.5 (no driver attached) [...] pci15: <dasp, performance counters> at device 28.1 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC-low" frequency 1349999790 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 numa-domain 0 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] nvme0: Allocated 64MB host memory buffer [...] nvd0: <Samsung SSD 980 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm7265Dfw: could not load firmware image, error 6 [...] uhub1: 4 ports with 4 removable, self powered [...] iwm0: could not read firmware iwm7265Dfw (error 0) [...] device_attach: iwm0 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.2: <ASUSTeK Xonar SoundCard> at usbus0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 numa-domain 0 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.3: <vendor 0x8087 product 0x0a2a> at usbus1 [...] ugen2.3: <Chicony HP Elite USB Keyboard> at usbus2 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 3> on usbus2 [...] kbd1 at ukbd0 [...] ugen1.4: <Logitech USB Receiver> at usbus1 [...] ukbd1 numa-domain 0 on uhub3 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 4> on usbus1 [...] kbd2 at ukbd1 [...] ugen1.5: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus1 [...] ukbd2 numa-domain 0 on uhub3 [...] ukbd2: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 5> on usbus1 [...] kbd3 at ukbd2 [...] Dual Console: Video Primary, Serial Secondary [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> numa-domain 1 on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1002:0x6B76 0xC1). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xFBC00000 [...] [drm] register mmio size: 524288 [...] [drm] add ip block number 0 <soc15_common> [...] [drm] add ip block number 1 <gmc_v9_0> [...] [drm] add ip block number 2 <vega10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <gfx_v9_0> [...] [drm] add ip block number 5 <sdma_v4_0> [...] [drm] add ip block number 6 <powerplay> [...] [drm] add ip block number 7 <dm> [...] [drm] add ip block number 8 <uvd_v7_0> [...] [drm] add ip block number 9 <vce_v4_0> [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_gpu_info.bin' [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-D0500100-102 [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sdma1.bin' [...] [drm] UVD(0) is enabled in VM mode [...] [drm] UVD(0) ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] drmn0: HBM ECC is not presented. [...] drmn0: SRAM ECC is not presented. [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [...] [drm] Detected VRAM RAM=8176M, BAR=256M [...] [drm] RAM width 2048bits HBM [...] [TTM] Zone kernel: Available graphics memory: 33511878 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8176M of VRAM memory ready [...] [drm] amdgpu: 8176M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sos.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_asd.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_ce.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_mec2.bin' [...] amdgpu: hwmgr_sw_init smu backed is vega10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_acg_smc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_uvd.bin' [...] [drm] Found UVD firmware Version: 66.43 Family ID: 17 [...] [drm] PSP loading UVD firmware [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_vce.bin' [...] [drm] Found VCE firmware Version: 57.6 Binary ID: 4 [...] [drm] PSP loading VCE firmware [...] [drm] reserve 0x400000 from 0xf5fec00000 for PSP TMR [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] Display Core initialized with v3.2.104! [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 16, active_cu_number 56 [...] [drm] fb mappable at 0x381FE0CEE000 [...] [drm] vram apper at 0x381FE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x381fe0cee000 vbase=0xfffffe01c5450000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] drmn0: ring gfx uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 0 on hub 1 [...] drmn0: ring page0 uses VM inv eng 1 on hub 1 [...] drmn0: ring sdma1 uses VM inv eng 4 on hub 1 [...] drmn0: ring page1 uses VM inv eng 5 on hub 1 [...] drmn0: ring uvd_0 uses VM inv eng 6 on hub 1 [...] drmn0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1 [...] drmn0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1 [...] drmn0: ring vce0 uses VM inv eng 9 on hub 1 [...] drmn0: ring vce1 uses VM inv eng 10 on hub 1 [...] drmn0: ring vce2 uses VM inv eng 11 on hub 1 [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] ioat0: <IVB IOAT Ch0> mem 0x380ffff1c000-0x380ffff1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <IVB IOAT Ch1> mem 0x380ffff18000-0x380ffff1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <IVB IOAT Ch2> mem 0x380ffff14000-0x380ffff17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <IVB IOAT Ch3> mem 0x380ffff10000-0x380ffff13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <IVB IOAT Ch4> mem 0x380ffff0c000-0x380ffff0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <IVB IOAT Ch5> mem 0x380ffff08000-0x380ffff0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <IVB IOAT Ch6> mem 0x380ffff04000-0x380ffff07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <IVB IOAT Ch7> mem 0x380ffff00000-0x380ffff03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ichsmb0: <Intel Patsburg SMBus controller> port 0x9000-0x901f mem 0x380ffff21000-0x380ffff210ff irq 18 at device 31.3 numa-domain 0 on pci0 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] ioat8: <IVB IOAT Ch0> mem 0x381ffff1c000-0x381ffff1ffff irq 55 at device 4.0 numa-domain 1 on pci8 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <IVB IOAT Ch1> mem 0x381ffff18000-0x381ffff1bfff irq 63 at device 4.1 numa-domain 1 on pci8 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <IVB IOAT Ch2> mem 0x381ffff14000-0x381ffff17fff irq 55 at device 4.2 numa-domain 1 on pci8 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <IVB IOAT Ch3> mem 0x381ffff10000-0x381ffff13fff irq 63 at device 4.3 numa-domain 1 on pci8 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <IVB IOAT Ch4> mem 0x381ffff0c000-0x381ffff0ffff irq 55 at device 4.4 numa-domain 1 on pci8 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <IVB IOAT Ch5> mem 0x381ffff08000-0x381ffff0bfff irq 63 at device 4.5 numa-domain 1 on pci8 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <IVB IOAT Ch6> mem 0x381ffff04000-0x381ffff07fff irq 55 at device 4.6 numa-domain 1 on pci8 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <IVB IOAT Ch7> mem 0x381ffff00000-0x381ffff03fff irq 63 at device 4.7 numa-domain 1 on pci8 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] lo0: link state changed to UP [...] uaudio0 numa-domain 0 on uhub1 [...] uaudio0: <ASUSTeK Xonar SoundCard, class 239/2, rev 2.00/1.06, addr 1> on usbus0 [...] uhid0 numa-domain 0 on uhub4 [...] uhid0: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 3> on usbus2 [...] uhid1 numa-domain 0 on uhub3 [...] uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 4> on usbus1 [...] uaudio0: Play[0]: 192000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 96000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 48000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> numa-domain 0 on uaudio0 [...] pcm7: <USB audio> numa-domain 0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid2 numa-domain 0 on uhub1 [...] uhid2: <ASUSTeK Xonar SoundCard, class 239/2, rev 2.00/1.06, addr 1> on usbus0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ng_ubt: HCI command 0x0c03 timed out [...] ng_ubt: HCI command 0x0c03 timed out [...] ums0 numa-domain 0 on uhub3 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 4> on usbus1 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] ums1 numa-domain 0 on uhub3 [...] ums1: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 5> on usbus1 [...] ums1: 3 buttons and [Z] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80003914800), ignoring. [...] igb1: link state changed to UP [...] wlan0: Ethernet address: ... [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] wlan0: link state changed to UP [...] igb1: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: ieee80211_new_state_locked: pending ASSOC -> AUTH transition lost [...] wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost [...] wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz (2700.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66773901312 (63680 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs [...] FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 45 13 24 17 15 30 5 37 9 47 28 40 16 12 10 1 6 31 25 39 23 21 19 27 2 33 42 34 46 26 4 22 11 35 3 18 20 36 44 8 43 41 32 7 14 38 29 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] igb0: <Intel(R) I350 (Copper)> port 0x8020-0x803f mem 0xdfe20000-0xdfe3ffff,0xdfe44000-0xdfe47fff irq 27 at device 0.0 numa-domain 0 on pci2 [...] igb0: EEPROM V1.61-0 eTrack 0x8000090e [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x8000-0x801f mem 0xdfe00000-0xdfe1ffff,0xdfe40000-0xdfe43fff irq 30 at device 0.1 numa-domain 0 on pci2 [...] igb1: EEPROM V1.61-0 eTrack 0x8000090e [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm0: could not read firmware iwm7265Dfw (error 0) [...] device_attach: iwm0 attach returned 6 [...] pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xdfc00000-0xdfc07fff irq 40 at device 0.0 numa-domain 0 on pci4 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x7000-0x70ff mem 0x380fffc7c000-0x380fffc7ffff,0x380fff800000-0x380fffbfffff irq 16 at device 0.0 numa-domain 0 on pci5 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdff02000-0xdff023ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdff01000-0xdff013ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9070-0x9077,0x9060-0x9063,0x9050-0x9057,0x9040-0x9043,0x9020-0x903f mem 0xdff00000-0xdff007ff irq 19 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci7: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.5 (no driver attached) [...] pci7: <dasp, performance counters> at device 28.1 (no driver attached) [...] pcib8: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 51 at device 1.0 numa-domain 1 on pci8 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci8 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xfbe00000-0xfbe03fff irq 56 at device 0.0 numa-domain 1 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci8 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <PCI-PCI bridge> mem 0xfbd00000-0xfbd03fff irq 64 at device 0.0 numa-domain 1 on pci12 [...] pci13: <PCI bus> numa-domain 1 on pcib13 [...] pcib14: <PCI-PCI bridge> irq 64 at device 0.0 numa-domain 1 on pci13 [...] pci14: <PCI bus> numa-domain 1 on pcib14 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x381fe0000000-0x381fefffffff,0x381ff0000000-0x381ff01fffff,0xfbc00000-0xfbc7ffff irq 64 at device 0.0 numa-domain 1 on pci14 [...] hdac0: <ATI (0xaaf8) HDA Controller> mem 0xfbca0000-0xfbca3fff irq 68 at device 0.1 numa-domain 1 on pci14 [...] pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 1 on pcib15 [...] pci15: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.5 (no driver attached) [...] pci15: <dasp, performance counters> at device 28.1 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC-low" frequency 1349999832 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <(0x1b21) XHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 numa-domain 0 on usbus0 [...] uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] nvd0: <Samsung SSD 980 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm7265Dfw: could not load firmware image, error 6 [...] uhub2: 4 ports with 4 removable, self powered [...] iwm0: could not read firmware iwm7265Dfw (error 0) [...] device_attach: iwm0 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.2: <ASUSTeK Xonar SoundCard> at usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 numa-domain 0 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.3: <vendor 0x8087 product 0x0a2a> at usbus1 [...] ugen2.3: <Chicony HP Elite USB Keyboard> at usbus2 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 3> on usbus2 [...] kbd1 at ukbd0 [...] ugen1.4: <Logitech USB Receiver> at usbus1 [...] ukbd1 numa-domain 0 on uhub3 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 4> on usbus1 [...] kbd2 at ukbd1 [...] ugen1.5: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus1 [...] ukbd2 numa-domain 0 on uhub3 [...] ukbd2: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 5> on usbus1 [...] kbd3 at ukbd2 [...] Dual Console: Video Primary, Serial Secondary [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdfd00000-0xdfd01fff irq 32 at device 0.0 numa-domain 0 on pci3 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> numa-domain 1 on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1002:0x6B76 0xC1). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xFBC00000 [...] [drm] register mmio size: 524288 [...] [drm] add ip block number 0 <soc15_common> [...] [drm] add ip block number 1 <gmc_v9_0> [...] [drm] add ip block number 2 <vega10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <gfx_v9_0> [...] [drm] add ip block number 5 <sdma_v4_0> [...] [drm] add ip block number 6 <powerplay> [...] [drm] add ip block number 7 <dm> [...] [drm] add ip block number 8 <uvd_v7_0> [...] [drm] add ip block number 9 <vce_v4_0> [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_gpu_info.bin' [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-D0500100-102 [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sdma1.bin' [...] [drm] UVD(0) is enabled in VM mode [...] [drm] UVD(0) ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] drmn0: HBM ECC is not presented. [...] drmn0: SRAM ECC is not presented. [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [...] [drm] Detected VRAM RAM=8176M, BAR=256M [...] [drm] RAM width 2048bits HBM [...] [TTM] Zone kernel: Available graphics memory: 33518022 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8176M of VRAM memory ready [...] [drm] amdgpu: 8176M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_sos.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_asd.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_ce.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_mec2.bin' [...] amdgpu: hwmgr_sw_init smu backed is vega10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_acg_smc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_uvd.bin' [...] [drm] Found UVD firmware Version: 66.43 Family ID: 17 [...] [drm] PSP loading UVD firmware [...] drmn0: successfully loaded firmware image 'amdgpu/vega10_vce.bin' [...] [drm] Found VCE firmware Version: 57.6 Binary ID: 4 [...] [drm] PSP loading VCE firmware [...] [drm] reserve 0x400000 from 0xf5fec00000 for PSP TMR [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] Display Core initialized with v3.2.104! [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 16, active_cu_number 56 [...] [drm] fb mappable at 0x381FE0CEE000 [...] [drm] vram apper at 0x381FE0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x381fe0cee000 vbase=0xfffffe01c54f7000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] drmn0: ring gfx uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 0 on hub 1 [...] drmn0: ring page0 uses VM inv eng 1 on hub 1 [...] drmn0: ring sdma1 uses VM inv eng 4 on hub 1 [...] drmn0: ring page1 uses VM inv eng 5 on hub 1 [...] drmn0: ring uvd_0 uses VM inv eng 6 on hub 1 [...] drmn0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1 [...] drmn0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1 [...] drmn0: ring vce0 uses VM inv eng 9 on hub 1 [...] drmn0: ring vce1 uses VM inv eng 10 on hub 1 [...] drmn0: ring vce2 uses VM inv eng 11 on hub 1 [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] ioat0: <IVB IOAT Ch0> mem 0x380ffff1c000-0x380ffff1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <IVB IOAT Ch1> mem 0x380ffff18000-0x380ffff1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <IVB IOAT Ch2> mem 0x380ffff14000-0x380ffff17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <IVB IOAT Ch3> mem 0x380ffff10000-0x380ffff13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <IVB IOAT Ch4> mem 0x380ffff0c000-0x380ffff0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <IVB IOAT Ch5> mem 0x380ffff08000-0x380ffff0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <IVB IOAT Ch6> mem 0x380ffff04000-0x380ffff07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <IVB IOAT Ch7> mem 0x380ffff00000-0x380ffff03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ichsmb0: <Intel Patsburg SMBus controller> port 0x9000-0x901f mem 0x380ffff21000-0x380ffff210ff irq 18 at device 31.3 numa-domain 0 on pci0 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] ioat8: <IVB IOAT Ch0> mem 0x381ffff1c000-0x381ffff1ffff irq 55 at device 4.0 numa-domain 1 on pci8 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <IVB IOAT Ch1> mem 0x381ffff18000-0x381ffff1bfff irq 63 at device 4.1 numa-domain 1 on pci8 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <IVB IOAT Ch2> mem 0x381ffff14000-0x381ffff17fff irq 55 at device 4.2 numa-domain 1 on pci8 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <IVB IOAT Ch3> mem 0x381ffff10000-0x381ffff13fff irq 63 at device 4.3 numa-domain 1 on pci8 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <IVB IOAT Ch4> mem 0x381ffff0c000-0x381ffff0ffff irq 55 at device 4.4 numa-domain 1 on pci8 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <IVB IOAT Ch5> mem 0x381ffff08000-0x381ffff0bfff irq 63 at device 4.5 numa-domain 1 on pci8 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <IVB IOAT Ch6> mem 0x381ffff04000-0x381ffff07fff irq 55 at device 4.6 numa-domain 1 on pci8 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <IVB IOAT Ch7> mem 0x381ffff00000-0x381ffff03fff irq 63 at device 4.7 numa-domain 1 on pci8 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] uaudio0 numa-domain 0 on uhub2 [...] uaudio0: <ASUSTeK Xonar SoundCard, class 239/2, rev 2.00/1.06, addr 1> on usbus0 [...] uaudio0: Play[0]: 192000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 96000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 48000 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 6 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[1]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 192000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[1]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> numa-domain 0 on uaudio0 [...] pcm7: <USB audio> numa-domain 0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 numa-domain 0 on uhub2 [...] uhid0: <ASUSTeK Xonar SoundCard, class 239/2, rev 2.00/1.06, addr 1> on usbus0 [...] uhid1 numa-domain 0 on uhub4 [...] uhid1: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 3> on usbus2 [...] uhid2 numa-domain 0 on uhub3 [...] uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 4> on usbus1 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ng_ubt: HCI command 0x0c03 timed out