[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p9 GENERIC i386 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU 2.40GHz (2129.71-MHz 686-class CPU) [...] Origin="GenuineIntel" Id=0xf29 Family=0xf Model=0x2 Stepping=9 [...] Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4400<CNXT-ID,xTPR> [...] real memory = 805306368 (768 MB) [...] avail memory = 685764608 (653 MB) [...] random: unblocking device. [...] Timecounter "TSC" frequency 2129706740 Hz quality 800 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0x14da4d0, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <PTLTD RSDT> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] agp0: <ATI RS200M AGP bridge> on hostb0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd8000000-0xdfffffff,0xd0300000-0xd030ffff at device 5.0 on pci1 [...] vgapci0: Boot video device [...] pci0: <multimedia, audio> at device 6.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 7.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <simple comms, generic modem> at device 8.0 (no driver attached) [...] cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0002000-0xd0002fff irq 11 at device 10.0 on pci0 [...] cardbus0: <CardBus bus> on cbb0 [...] pccard0: <16-bit PCCard bus> on cbb0 [...] uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0 [...] usbus0 on uhci0 [...] uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0 [...] usbus1 on uhci1 [...] ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd0003000-0xd00030ff at device 11.2 on pci0 [...] usbus2: EHCI version 0.95 [...] usbus2 on ehci0 [...] pci0: <serial bus, FireWire> at device 12.0 (no driver attached) [...] atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2040-0x204f at device 16.0 on pci0 [...] atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] pci0: <bridge> at device 17.0 (no driver attached) [...] sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0008000-0xd0008fff irq 10 at device 18.0 on pci0 [...] sis0: Silicon Revision: DP83816A [...] miibus0: <MII bus> on sis0 [...] nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 [...] nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] sis0: Ethernet address: ... [...] acpi_button0: <Power Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model IntelliMouse, device ID 3 [...] acpi_syscontainer0: <System Container> on acpi0 [...] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 0 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/1 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 drq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 [...] Timecounters tick every 1.000 msec [...] usbus0: 12Mbps Full Speed USB v1.0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ugen0.1: <VIA UHCI root HUB> at usbus0 [...] uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <VIA UHCI root HUB> at usbus1 [...] uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <VIA EHCI root HUB> at usbus2 [...] uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ata0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST93012A 4.04> ATA-6 device [...] ada0: Serial Number... [...] ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) [...] ada0: 28615MB (58605120 512 byte sectors) [...] cd0 at ata1 bus 0 scbus1 target 0 lun 0 [...] cd0: <SONY CD-RW CRX830E JPK4> Removable CD-ROM SCSI device [...] cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] lo0: link state changed to UP [...] sis0: link state changed to UP [...] calcru: runtime went backwards from 6241 usec to 5555 usec for pid 635 (sendmail) [...] calcru: runtime went backwards from 8488 usec to 7555 usec for pid 635 (sendmail) [...] calcru: runtime went backwards from 8710 usec to 7754 usec for pid 632 (sendmail) [...] calcru: runtime went backwards from 8238 usec to 7334 usec for pid 617 (nginx) [...] calcru: runtime went backwards from 3048 usec to 2713 usec for pid 615 (nginx) [...] calcru: runtime went backwards from 71 usec to 63 usec for pid 7 (sctp_iterator) [...] calcru: runtime went backwards from 1457 usec to 1297 usec for pid 6 (fdc0) [...] calcru: runtime went backwards from 28335 usec to 27384 usec for pid 13 (geom) [...] calcru: runtime went backwards from 8305571 usec to 7754629 usec for pid 1 (init)