[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267840-e62d514886a SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (2128.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30661 Family=0x6 Model=0x36 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4068749312 (3880 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <BUFINC WS5KR2DR> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <BUFINC WS5KR2DR> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf120-0xf127 mem 0xfe700000-0xfe7fffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0c0-0xf0df irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0a0-0xf0bf irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf080-0xf09f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfeb02000-0xfeb023ff irq 18 at device 26.7 on pci0 [...] usbus3: waiting for BIOS to give up control [...] usbus3: timed out waiting for BIOS [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfea00000-0xfea01fff irq 19 at device 0.0 on pci1 [...] xhci0: 64 bytes context size, 32-bit DMA [...] usbus4 on xhci0 [...] usbus4: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xfe900000-0xfe91ffff,0xfe920000-0xfe923fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-3 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf060-0xf07f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus5 on uhci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf040-0xf05f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus6 on uhci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf020-0xf03f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus7 on uhci5 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfeb01000-0xfeb013ff irq 23 at device 29.7 on pci0 [...] usbus8: waiting for BIOS to give up control [...] usbus8: timed out waiting for BIOS [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci1 [...] usbus8: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf000-0xf01f mem 0xfeb00000-0xfeb007ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 5 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen7.1: <Intel UHCI root HUB> at usbus7 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus7 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] uhub2 on usbus3 [...] ugen4.1: <(0x1912) XHCI root HUB> at usbus4 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3 on usbus4 [...] uhub3: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen8.1: <Intel EHCI root HUB> at usbus8 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub5 on usbus6 [...] uhub6 on usbus8 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] uhub7 on usbus5 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub8 on usbus1 [...] uhub8: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot01/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 2861588MB (5860533168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 2861588MB (5860533168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 2861588MB (5860533168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 2861588MB (5860533168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub8: 2 ports with 2 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus3 usbus8 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] ugen5.2: <Chicony HP Wired Desktop 320K Keyboard> at usbus5 [...] ukbd0 on uhub7 [...] ukbd0: <Chicony HP Wired Desktop 320K Keyboard, class 0/0, rev 2.00/9.20, addr 2> on usbus5 [...] kbd2 at ukbd0 [...] warning: total configured swap (4194304 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] warning: total configured swap (6291456 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] warning: total configured swap (8388608 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] CPU: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (2128.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30661 Family=0x6 Model=0x36 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] em0: link state changed to UP [...] ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x1180-0x119f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub7 [...] uhid0: <Chicony HP Wired Desktop 320K Keyboard, class 0/0, rev 2.00/9.20, addr 2> on usbus5 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] coretemp0: Can not get Tj(target) from your CPU, using 100C. [...] coretemp1: Can not get Tj(target) from your CPU, using 100C. [...] coretemp2: Can not get Tj(target) from your CPU, using 100C. [...] coretemp3: Can not get Tj(target) from your CPU, using 100C. [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] vlan0: changing name to 'vlan01' [...] wg0: link state changed to UP [...] wg0: link state changed to DOWN [...] arp: packet with invalid ethernet address length 0 received on em0 [...] wg0: link state changed to UP [...] em1: link state changed to UP [...] vlan01: link state changed to UP [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] vlan1: changing name to 'em1_vlan102' [...] vlan1: changing name to 'em1_vlan102' [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] vlan1: changing name to 'em1_vlan102' [...] vlan1: changing name to 'em1_vlan102' [...] pid 7316 (ntpd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 18h41m48s [...] uhub6: detached [...] uhub1: detached [...] uhub5: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub7: detached [...] uhub3: detached [...] uhub2: detached [...] uhub4: detached [...] uhub8: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267840-e62d514886a SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (2128.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30661 Family=0x6 Model=0x36 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4068745216 (3880 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <BUFINC WS5KR2DR> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <BUFINC WS5KR2DR> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf120-0xf127 mem 0xfe700000-0xfe7fffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0c0-0xf0df irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0a0-0xf0bf irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf080-0xf09f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfeb02000-0xfeb023ff irq 18 at device 26.7 on pci0 [...] usbus3: waiting for BIOS to give up control [...] usbus3: timed out waiting for BIOS [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfea00000-0xfea01fff irq 19 at device 0.0 on pci1 [...] xhci0: 64 bytes context size, 32-bit DMA [...] usbus4 on xhci0 [...] usbus4: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xfe900000-0xfe91ffff,0xfe920000-0xfe923fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-3 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf060-0xf07f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus5 on uhci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf040-0xf05f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus6 on uhci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf020-0xf03f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus7 on uhci5 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfeb01000-0xfeb013ff irq 23 at device 29.7 on pci0 [...] usbus8: waiting for BIOS to give up control [...] usbus8: timed out waiting for BIOS [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci1 [...] usbus8: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf000-0xf01f mem 0xfeb00000-0xfeb007ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 5 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen8.1: <Intel EHCI root HUB> at usbus8 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus8 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] uhub2 on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen7.1: <Intel UHCI root HUB> at usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub3 on usbus1 [...] uhub4 on usbus7 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] uhub5 on usbus6 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub6 on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen4.1: <(0x1912) XHCI root HUB> at usbus4 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub7 on usbus5 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub8 on usbus4 [...] uhub8: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 [...] Trying to mount root from zfs:zroot01/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 2861588MB (5860533168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 2861588MB (5860533168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 2861588MB (5860533168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 2861588MB (5860533168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub8: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus3 usbus8 [...] uhub6: 6 ports with 6 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] ugen5.2: <Chicony HP Wired Desktop 320K Keyboard> at usbus5 [...] ukbd0 on uhub7 [...] ukbd0: <Chicony HP Wired Desktop 320K Keyboard, class 0/0, rev 2.00/9.20, addr 2> on usbus5 [...] kbd2 at ukbd0 [...] warning: total configured swap (4194304 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] warning: total configured swap (6291456 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] warning: total configured swap (8388608 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] warning: total configured swap (8912896 pages) exceeds maximum recommended amount (3989704 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] CPU: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (2128.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30661 Family=0x6 Model=0x36 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] em0: link state changed to UP [...] em1: link state changed to UP [...] ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x1180-0x119f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub7 [...] uhid0: <Chicony HP Wired Desktop 320K Keyboard, class 0/0, rev 2.00/9.20, addr 2> on usbus5 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] coretemp0: Can not get Tj(target) from your CPU, using 100C. [...] coretemp1: Can not get Tj(target) from your CPU, using 100C. [...] coretemp2: Can not get Tj(target) from your CPU, using 100C. [...] coretemp3: Can not get Tj(target) from your CPU, using 100C. [...] pflog0: permanently promiscuous mode enabled [...] em1: link state changed to DOWN [...] vlan0: changing name to 'em1_vlan102' [...] vlan0: changing name to 'em1_vlan102' [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em1_vlan102: link state changed to UP [...] em0: link state changed to UP [...] wg0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] vlan0: changing name to 'em1_vlan102' [...] vlan0: changing name to 'em1_vlan102' [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: packet with invalid ethernet address length 0 received on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] vlan0: changing name to 'em1_vlan102' [...] vlan0: changing name to 'em1_vlan102' [...] arprequest_internal: cannot find matching address [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] wg0: link state changed to DOWN [...] wg0: link state changed to UP [...] wg0: link state changed to DOWN [...] wg0: link state changed to UP [...] wg0: link state changed to DOWN [...] wg0: link state changed to UP [...] wg0: link state changed to DOWN [...] wg0: link state changed to UP [...] wg0: link state changed to DOWN [...] wg0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2h36m40s [...] uhub1: detached [...] uhub4: detached [...] uhub5: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub7: detached [...] uhub8: detached [...] uhub6: detached [...] uhub2: detached [...] uhub3: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267840-e62d514886a SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz (2128.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30661 Family=0x6 Model=0x36 Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4068753408 (3880 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <BUFINC WS5KR2DR> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <BUFINC WS5KR2DR> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf120-0xf127 mem 0xfe700000-0xfe7fffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0c0-0xf0df irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0a0-0xf0bf irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf080-0xf09f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfeb02000-0xfeb023ff irq 18 at device 26.7 on pci0 [...] usbus3: waiting for BIOS to give up control [...] usbus3: timed out waiting for BIOS [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfea00000-0xfea01fff irq 19 at device 0.0 on pci1 [...] xhci0: 64 bytes context size, 32-bit DMA [...] usbus4 on xhci0 [...] usbus4: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xfe900000-0xfe91ffff,0xfe920000-0xfe923fff irq 16 at device 0.0 on pci2 [...] em0: EEPROM V2.1-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff irq 17 at device 0.0 on pci3 [...] em1: EEPROM V2.1-3 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf060-0xf07f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus5 on uhci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf040-0xf05f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus6 on uhci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf020-0xf03f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus7 on uhci5 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfeb01000-0xfeb013ff irq 23 at device 29.7 on pci0 [...] usbus8: waiting for BIOS to give up control [...] usbus8: timed out waiting for BIOS [...] usbus8: EHCI version 1.0 [...] usbus8 on ehci1 [...] usbus8: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf000-0xf01f mem 0xfeb00000-0xfeb007ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 5 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen4.1: <(0x1912) XHCI root HUB> at usbus4 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus4 [...] uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 [...] ugen7.1: <Intel UHCI root HUB> at usbus7 [...] uhub2 on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus7 [...] uhub4 on usbus0 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen8.1: <Intel EHCI root HUB> at usbus8 [...] uhub5 on usbus3 [...] uhub6 on usbus8 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 [...] uhub7 on usbus6 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub8 on usbus5 [...] uhub8: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot01/ROOT/default []... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 2861588MB (5860533168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 2861588MB (5860533168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 2861588MB (5860533168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <Hitachi HUA723030ALA640 MKAOA800> ATA8-ACS SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 2861588MB (5860533168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 [...] ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 [...] uhub7: 2 ports with 2 removable, self powered [...] uhub8: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus3 usbus8 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] ugen5.2: <Chicony HP Wired Desktop 320K Keyboard> at usbus5 [...] ukbd0 on uhub8 [...] ukbd0: <Chicony HP Wired Desktop 320K Keyboard, class 0/0, rev 2.00/9.20, addr 2> on usbus5 [...] kbd2 at ukbd0