[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8214372352 (7833 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL TIANO > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7f0cb000-0x7f0cb01e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <processor> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> mem 0xdf420000-0xdf43ffff at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff at device 17.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff at device 0.0 on pci4 [...] ahci0: <Intel Denverton AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe020-0xe03f mem 0xdf454000-0xdf455fff,0xdf459000-0xdf4590ff,0xdf458000-0xdf4587ff at device 20.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf440000-0xdf44ffff at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ix0: <Intel(R) X553 (1GbE)> mem 0xddc00000-0xdddfffff,0xdde04000-0xdde07fff at device 0.0 on pci5 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: eTrack 0x80000877 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X553 (1GbE)> mem 0xdda00000-0xddbfffff,0xdde00000-0xdde03fff at device 0.1 on pci5 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: eTrack 0x80000877 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ix2: <Intel(R) X553 L (1GbE)> mem 0xdd600000-0xdd7fffff,0xdd804000-0xdd807fff at device 0.0 on pci6 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 4 RX queues 4 TX queues [...] ix2: Using MSI-X interrupts with 5 vectors [...] ix2: allocated for 4 queues [...] ix2: allocated for 4 rx queues [...] ix2: Ethernet address: ... [...] ix2: eTrack 0x8000087c [...] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix3: <Intel(R) X553 L (1GbE)> mem 0xdd400000-0xdd5fffff,0xdd800000-0xdd803fff at device 0.1 on pci6 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 4 RX queues 4 TX queues [...] ix3: Using MSI-X interrupts with 5 vectors [...] ix3: allocated for 4 queues [...] ix3: allocated for 4 rx queues [...] ix3: Ethernet address: ... [...] ix3: eTrack 0x8000087c [...] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pci0: <simple comms> at device 24.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1099999970 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WDS500G1R0B-68A4Z0 411010WR> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada1 at ahcich6 bus 0 scbus5 target 0 lun 0 [...] ada1: <Samsung SSD 840 EVO 120GB EXT0AB0Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 114473MB (234441648 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 06', SATA Slot: scbus5 target 0 [...] UFS2 superblock failed: fs->fs_sblockloc (0) != SBLOCK_UFS2 (0x10000) [...] UFS2 superblock failed: fs->fs_nindir (353637138) != fs->fs_bsize / sizeof(ufs2_daddr_t) (136841191) [...] UFS2 superblock failed: fs->fs_inopb (421009174) != fs->fs_bsize / sizeof(struct ufs2_dinode) (4276287) [...] UFS2 superblock failed: fs->fs_bsize (1094729534) > MAXBSIZE (65536) [...] UFS2 superblock failed: powerof2(fs->fs_bsize) (0) == 0 (0) [...] UFS2 superblock failed: fs->fs_frag (0) < 1 (1) [...] UFS2 superblock failed: fs->fs_frag (0) != numfrags(fs, fs->fs_bsize) (261) [...] UFS2 superblock failed: fs->fs_fsize * fs->fs_frag (0) != fs->fs_bsize (1094729534) [...] UFS2 superblock failed: powerof2(fs->fs_fsize) (0) == 0 (0) [...] UFS2 superblock failed: fs->fs_fpg (-2021227132) < 3 * fs->fs_frag (0) [...] UFS2 superblock failed: (u_int64_t)fs->fs_ipg * fs->fs_ncg (2266695386695467008) > (((int64_t)(1)) << 32) - INOPB(fs) (3873958122) [...] UFS2 superblock failed: fs->fs_sbsize (50462976) > SBLOCKSIZE (8192) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (1094729534) [...] UFS2 superblock failed: fs->fs_bmask (0) != ~(fs->fs_bsize - 1) (0xffffffffbebfc0c2) [...] UFS2 superblock failed: fs->fs_fmask (0x51500000) != ~(fs->fs_fsize - 1) (0xffffffffbabbbcbe) [...] UFS2 superblock failed: fs->fs_qbmask (0x7fff) != ~fs->fs_bmask (0xffffffffffffffff) [...] UFS2 superblock failed: fs->fs_qfmask (0xfff) != ~fs->fs_fmask (0xffffffffaeafffff) [...] UFS2 superblock failed: fs->fs_bshift (1431589714) != ILOG2(fs->fs_bsize) (30) [...] UFS2 superblock failed: fs->fs_fshift (1498961750) != ILOG2(fs->fs_fsize) (30) [...] UFS2 superblock failed: fs->fs_fragshift (1600019804) != ILOG2(fs->fs_frag) (-1) [...] UFS2 superblock failed: fs->fs_fsbtodb (1667391840) != ILOG2(fs->fs_fsize / sectorsize) (21) [...] UFS2 superblock failed: fs->fs_old_cgoffset * (~fs->fs_old_cgmask) (0) > fs->fs_fpg (-2021227132) [...] UFS2 superblock failed: fs->fs_sblockloc (0) != SBLOCK_UFS2 (0x10000) [...] UFS2 superblock failed: fs->fs_nindir (353637138) != fs->fs_bsize / sizeof(ufs2_daddr_t) (136841191) [...] UFS2 superblock failed: fs->fs_inopb (421009174) != fs->fs_bsize / sizeof(struct ufs2_dinode) (4276287) [...] UFS2 superblock failed: fs->fs_bsize (1094729534) > MAXBSIZE (65536) [...] UFS2 superblock failed: powerof2(fs->fs_bsize) (0) == 0 (0) [...] UFS2 superblock failed: fs->fs_frag (0) < 1 (1) [...] UFS2 superblock failed: fs->fs_frag (0) != numfrags(fs, fs->fs_bsize) (261) [...] UFS2 superblock failed: fs->fs_fsize * fs->fs_frag (0) != fs->fs_bsize (1094729534) [...] UFS2 superblock failed: powerof2(fs->fs_fsize) (0) == 0 (0) [...] UFS2 superblock failed: fs->fs_fpg (-2021227132) < 3 * fs->fs_frag (0) [...] UFS2 superblock failed: (u_int64_t)fs->fs_ipg * fs->fs_ncg (2266695386695467008) > (((int64_t)(1)) << 32) - INOPB(fs) (3873958122) [...] UFS2 superblock failed: fs->fs_sbsize (50462976) > SBLOCKSIZE (8192) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (1094729534) [...] UFS2 superblock failed: fs->fs_bmask (0) != ~(fs->fs_bsize - 1) (0xffffffffbebfc0c2) [...] UFS2 superblock failed: fs->fs_fmask (0x51500000) != ~(fs->fs_fsize - 1) (0xffffffffbabbbcbe) [...] UFS2 superblock failed: fs->fs_qbmask (0x7fff) != ~fs->fs_bmask (0xffffffffffffffff) [...] UFS2 superblock failed: fs->fs_qfmask (0xfff) != ~fs->fs_fmask (0xffffffffaeafffff) [...] UFS2 superblock failed: fs->fs_bshift (1431589714) != ILOG2(fs->fs_bsize) (30) [...] UFS2 superblock failed: fs->fs_fshift (1498961750) != ILOG2(fs->fs_fsize) (30) [...] UFS2 superblock failed: fs->fs_fragshift (1600019804) != ILOG2(fs->fs_frag) (-1) [...] UFS2 superblock failed: fs->fs_fsbtodb (1667391840) != ILOG2(fs->fs_fsize / sectorsize) (21) [...] UFS2 superblock failed: fs->fs_old_cgoffset * (~fs->fs_old_cgmask) (0) > fs->fs_fpg (-2021227132) [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] ugen0.2: <SanDisk Cruzer Blade> at usbus0 [...] umass0 on uhub0 [...] umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <SanDisk Cruzer Blade 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29340MB (60088320 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <American Power Conversion Back-UPS RS 1200SI FW:959.g6 .I USB FW:g6> at usbus0 [...] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.5: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 3 removable, self powered [...] ugen0.6: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 6> on usbus0 [...] uhub3: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Dual Console: Video Primary, Serial Secondary