[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) CPU E5-2630L v4 @ 1.80GHz (1798.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66665590784 (63577 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs [...] FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 10 11 36 4 24 21 3 14 38 30 16 35 7 19 34 31 9 12 32 2 25 39 15 18 17 13 22 28 26 8 6 29 27 20 5 33 23 37 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HP ProLiant> [...] acpi0: Power Button (fixed) [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] ciss0: <HP Smart Array P440ar> port 0x3000-0x30ff mem 0x93300000-0x933fffff,0x93400000-0x934003ff at device 0.0 numa-domain 0 on pci3 [...] ciss0: PERFORMANT Transport [...] pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci5 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <PCI-PCI bridge> at device 3.0 numa-domain 0 on pci6 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x93100000-0x931fffff,0x93200000-0x93203fff at device 0.0 numa-domain 0 on pci7 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <PCI-PCI bridge> at device 7.0 numa-domain 0 on pci6 [...] pci8: <PCI bus> numa-domain 0 on pcib8 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x92f00000-0x92ffffff,0x93000000-0x93003fff at device 0.0 numa-domain 0 on pci8 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2020-0x203f mem 0x92d00000-0x92dfffff,0x92e04000-0x92e07fff at device 0.0 numa-domain 0 on pci10 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 10 RX queues 10 TX queues [...] ix0: Using MSI-X interrupts with 11 vectors [...] ix0: allocated for 10 queues [...] ix0: allocated for 10 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V1-b1446-p0 eTrack 0x80000838 PHY FW V65535 [...] ix0: netmap queues/slots: TX 10/2048, RX 10/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2000-0x201f mem 0x92c00000-0x92cfffff,0x92e00000-0x92e03fff at device 0.1 numa-domain 0 on pci10 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 10 RX queues 10 TX queues [...] ix1: Using MSI-X interrupts with 11 vectors [...] ix1: allocated for 10 queues [...] ix1: allocated for 10 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V1-b1446-p0 eTrack 0x80000838 PHY FW V65535 [...] ix1: netmap queues/slots: TX 10/2048, RX 10/2048 [...] pcib11: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x39fffeb0000-0x39fffebffff,0x39fffea0000-0x39fffeaffff,0x39fffe90000-0x39fffe9ffff at device 0.0 numa-domain 0 on pci12 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x39fffe80000-0x39fffe8ffff,0x39fffe70000-0x39fffe7ffff,0x39fffe60000-0x39fffe6ffff at device 0.1 numa-domain 0 on pci12 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] bge2: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x39fffe50000-0x39fffe5ffff,0x39fffe40000-0x39fffe4ffff,0x39fffe30000-0x39fffe3ffff at device 0.2 numa-domain 0 on pci12 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x39fffe20000-0x39fffe2ffff,0x39fffe10000-0x39fffe1ffff,0x39fffe00000-0x39fffe0ffff at device 0.3 numa-domain 0 on pci12 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] pcib13: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2 [...] pci14: <ACPI PCI bus> numa-domain 0 on pcib14 [...] pcib15: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2 [...] pci15: <ACPI PCI bus> numa-domain 0 on pcib15 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93502000-0x935023ff at device 26.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib16: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2 [...] pci16: <ACPI PCI bus> numa-domain 0 on pcib16 [...] pcib17: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2 [...] pci17: <ACPI PCI bus> numa-domain 0 on pcib17 [...] vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci17 [...] vgapci0: Boot video device [...] uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci17 [...] usbus2 numa-domain 0 on uhci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] pcib18: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2 [...] pci18: <ACPI PCI bus> numa-domain 0 on pcib18 [...] bge4: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92b90000-0x92b9ffff,0x92ba0000-0x92baffff,0x92bb0000-0x92bbffff at device 0.0 numa-domain 0 on pci18 [...] bge4: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge4: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus4: <MII bus> numa-domain 0 on bge4 [...] brgphy4: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus4 [...] brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge4: Using defaults for TSO: 65518/35/2048 [...] bge4: Ethernet address: ... [...] pci0:2:0:1: no valid vpd ident found [...] pci0:2:0:1: failed to read VPD data. [...] bge5: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x92b60000-0x92b6ffff,0x92b70000-0x92b7ffff,0x92b80000-0x92b8ffff at device 0.1 numa-domain 0 on pci18 [...] bge5: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge5: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus5: <MII bus> numa-domain 0 on bge5 [...] brgphy5: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus5 [...] brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge5: Using defaults for TSO: 65518/35/2048 [...] bge5: Ethernet address: ... [...] pci0:2:0:2: no valid vpd ident found [...] pci0:2:0:2: failed to read VPD data. [...] bge6: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x92b30000-0x92b3ffff,0x92b40000-0x92b4ffff,0x92b50000-0x92b5ffff at device 0.2 numa-domain 0 on pci18 [...] bge6: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge6: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus6: <MII bus> numa-domain 0 on bge6 [...] brgphy6: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus6 [...] brgphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge6: Using defaults for TSO: 65518/35/2048 [...] bge6: Ethernet address: ... [...] pci0:2:0:3: no valid vpd ident found [...] pci0:2:0:3: failed to read VPD data. [...] bge7: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff at device 0.3 numa-domain 0 on pci18 [...] bge7: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge7: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus7: <MII bus> numa-domain 0 on bge7 [...] brgphy7: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus7 [...] brgphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge7: Using defaults for TSO: 65518/35/2048 [...] bge7: Ethernet address: ... [...] pcib19: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2 [...] pci19: <ACPI PCI bus> numa-domain 0 on pcib19 [...] pcib20: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2 [...] pci20: <ACPI PCI bus> numa-domain 0 on pcib20 [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93501000-0x935013ff at device 29.0 numa-domain 0 on pci2 [...] usbus3: EHCI version 1.0 [...] usbus3 numa-domain 0 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x4058-0x405f,0x407c-0x407f,0x4050-0x4057,0x4078-0x407b,0x4020-0x403f mem 0x93500000-0x935007ff at device 31.2 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib21: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci21: <ACPI PCI bus> numa-domain 1 on pcib21 [...] pcib22: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci21 [...] pci22: <ACPI PCI bus> numa-domain 1 on pcib22 [...] pcib23: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci21 [...] pci23: <ACPI PCI bus> numa-domain 1 on pcib23 [...] pcib24: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci21 [...] pci24: <ACPI PCI bus> numa-domain 1 on pcib24 [...] pcib25: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci21 [...] pci25: <ACPI PCI bus> numa-domain 1 on pcib25 [...] pcib26: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci21 [...] pci26: <ACPI PCI bus> numa-domain 1 on pcib26 [...] pcib27: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci21 [...] pci27: <ACPI PCI bus> numa-domain 1 on pcib27 [...] pcib28: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci21 [...] pci28: <ACPI PCI bus> numa-domain 1 on pcib28 [...] pcib29: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci21 [...] pci29: <ACPI PCI bus> numa-domain 1 on pcib29 [...] pcib30: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci21 [...] pci30: <ACPI PCI bus> numa-domain 1 on pcib30 [...] pcib31: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci21 [...] pci31: <ACPI PCI bus> numa-domain 1 on pcib31 [...] pcib32: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci21 [...] pci32: <ACPI PCI bus> numa-domain 1 on pcib32 [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est27 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est28 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est29 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est30 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est31 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est32 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est33 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est34 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est35 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est36 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est37 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est38 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1bc600001400 [...] device_attach: est39 attach returned 6 [...] Timecounter "TSC" frequency 1797917067 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass2 in 'Slot 05', SATA Slot: scbus3 target 0 [...] cd0 at ahcich5 bus 0 scbus3 target 0 lun 0 [...] cd0: <hp DVDROM DU8RESH 3HJ3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] da0 at ciss0 bus 32 scbus1 target 0 lun 0 [...] da0: <ATA SUNEAST SE900 SS 289> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 135.168MB/s transfers [...] da0: Command Queueing enabled [...] da0: 244198MB (500118192 512 byte sectors) [...] da1 at ciss0 bus 32 scbus1 target 1 lun 0 [...] da1: <ATA SUNEAST SE900 SS 289> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 135.168MB/s transfers [...] da1: Command Queueing enabled [...] da1: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <HP UHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 numa-domain 0 on usbus2 [...] uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub2 numa-domain 0 on usbus1 [...] uhub3 numa-domain 0 on usbus3 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] GEOM_MIRROR: Cancelling unmapped because of da1p3. [...] GEOM_MIRROR: Cancelling unmapped because of da0p3. [...] GEOM_MIRROR: Device mirror/swap launched (1/2). [...] GEOM_MIRROR: Device swap: rebuilding provider da0p3. [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x2660> at usbus0 [...] uhub4 numa-domain 0 on uhub0 [...] uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub5 numa-domain 0 on uhub2 [...] uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x8002> at usbus3 [...] uhub6 numa-domain 0 on uhub3 [...] uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3 [...] uhub4: 2 ports with 1 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic Ultra Fast Media Reader (0x0424:0x4030) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic Ultra Fast Media Reader (0x0424:0x4030) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic Ultra Fast Media Reader (0x0424:0x4030) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Generic Ultra Fast Media Reader (0x0424:0x4030) [...] ugen0.3: <Generic Ultra Fast Media Reader> at usbus0 [...] umass0 numa-domain 0 on uhub4 [...] umass0: <Generic Ultra Fast Media Reader, class 0/0, rev 2.00/2.10, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc104 [...] umass0:5:0: Attached to scbus5 [...] da2 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da2: <HP iLO Internal SD-CARD 2.10> Fixed Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: 30436MB (62333952 512 byte sectors) [...] da2: quirks=0x2<NO_6_BYTE> [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ORACLE SSM (0x1005:0xb155) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device ORACLE SSM (0x1005:0xb155) [...] ugen0.4: <ORACLE SSM> at usbus0 [...] umass1 numa-domain 0 on uhub0 [...] umass1: <ORACLE SSM, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x8100 [...] umass1:6:1: Attached to scbus6 [...] da3 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] da3: <ORACLE SSM PMAP> Removable Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: 7640MB (15646720 512 byte sectors) [...] da3: quirks=0x2<NO_6_BYTE> [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f c1 00 00 04 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 1e 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 1c 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 1a 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 18 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 16 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 14 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f c1 00 00 04 00 [...] (da1:ciss0:32:1:0): CAM status: SCSI Status Error [...] (da1:ciss0:32:1:0): SCSI status: Check Condition [...] (da1:ciss0:32:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) [...] (da1:ciss0:32:1:0): Retrying command (per sense data) [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 20 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 22 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 24 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 26 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f c1 00 00 04 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 1 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 14 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 2 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 28 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 2a 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 2c 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 2e 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 14 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 1 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f c1 00 00 04 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 0 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 30 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 32 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 34 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 36 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f c1 00 00 04 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Error 5, Retries exhausted [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 14 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 0 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 38 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 3a 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 3c 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 3e 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 1d cf 2f fe 00 00 01 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Retrying command, 3 more tries remain [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 14 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: CCB request completed with an error [...] (da1:ciss0:32:1:0): Error 5, Retries exhausted [...] GEOM_MIRROR: Request failed (error=5). da1p3[READ(offset=1439694848, length=1048576)] [...] GEOM_MIRROR: Synchronization request failed (error=5). mirror/swap[READ(offset=1439694848, length=1048576)] [...] GEOM_MIRROR: Device swap: provider da0p3 disconnected. [...] GEOM_MIRROR: Device swap: rebuilding provider da0p3 stopped. [...] (da1:ciss0:32:1:0): READ(10). CDB: 28 00 00 33 38 00 00 02 00 00 [...] (da1:ciss0:32:1:0): CAM status: SCSI Status Error [...] (da1:ciss0:32:1:0): SCSI status: Check Condition [...] (da1:ciss0:32:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) [...] (da1:ciss0:32:1:0): Retrying command (per sense data)