[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p5 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] Setting sysctl hw.snd.default_unit failed: 22 [...] VT(vga): resolution 640x480 [...] CPU: AMD Ryzen 5 1600 Six-Core Processor (3194.09-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16570912768 (15803 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 10 6 7 11 9 5 4 8 3 1 2 [...] Timecounter "TSC-low" frequency 1597045696 Hz quality 1000 [...] random: entropy device external interface [...] 000.000017 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0 [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfcf20000-0xfcf23fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 32 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 33 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci3 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff irq 35 at device 0.0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib10: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfce00000-0xfce3ffff irq 54 at device 0.0 on pci10 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfce60000-0xfce63fff irq 55 at device 0.1 on pci10 [...] pcib11: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] pci11: <unknown> at device 0.0 (no driver attached) [...] pci11: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <AMD KERNCZ USB 3.0 controller> mem 0xfc800000-0xfc8fffff irq 37 at device 0.3 on pci11 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfcd08000-0xfcd08fff irq 42 at device 0.2 on pci12 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] hdac1: <AMD (0x1457) HDA Controller> mem 0xfcd00000-0xfcd07fff irq 43 at device 0.3 on pci12 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0 [...] ivhd0: <AMD-Vi/IOMMU ivhd with EFR> on acpi0 [...] ivhd0: Flag:b0<IotlbSup,Coherent> [...] ivhd0: Features(type:0x11) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0 [...] ivhd0: Extended features[31:0]:22294ada<PPRSup,NXSup,GTSup,IASup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2 [...] ivhd0: Extended features[62:32]:f77ef<USSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1 [...] ivhd0: supported paging level:7, will use only: 4 [...] ivhd0: device range: 0x0 - 0xffff [...] ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt> [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <PLEXTOR PX-512M8PeGN> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST91000640NS SN03> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST2000DM001-1CH164 CC27> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1907729MB (3907029168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 22 ports with 22 removable, self powered [...] ugen1.2: <Seagate Backup+ Hub> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <Seagate Backup+ Hub, class 9/0, rev 2.10/48.85, addr 1> on usbus1 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus1 usbus0 [...] uhub2: 3 ports with 3 removable, self powered [...] ugen0.2: <vendor 0x04b4 product 0x6018> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x04b4 product 0x6018, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 usbus0 [...] ugen0.3: <vendor 0x1d57 product 0xad02> at usbus0 [...] ukbd1 on uhub1 [...] ukbd1: <vendor 0x1d57 product 0xad02, class 0/0, rev 1.10/1.05, addr 2> on usbus0 [...] kbd3 at ukbd1 [...] ugen1.3: <Seagate Backup+ Hub BK> at usbus1 [...] umass0 on uhub2 [...] umass0: <Seagate Backup+ Hub BK, class 0/0, rev 2.10/1.00, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <Seagate Backup+ Hub BK D781> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 5723166MB (11721045167 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus1 [...] ugen1.4: <vendor 0x1ea7 USB Gaming Mouse> at usbus1 [...] ukbd2 on uhub2 [...] ukbd2: <vendor 0x1ea7 USB Gaming Mouse, class 0/0, rev 1.10/2.00, addr 3> on usbus1 [...] kbd4 at ukbd2 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <Seagate BUP BK> at usbus1 [...] umass1 on uhub2 [...] umass1: <Seagate BUP BK, class 0/0, rev 2.10/1.00, addr 4> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:6:1: Attached to scbus6 [...] da1 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] da1: <Seagate BUP BK 0304> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 3815447MB (7814037167 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ugen1.6: <Burr-Brown from TI USB Audio DAC> at usbus1 [...] GEOM_PART: Partition 'nvd0p3' not suitable for kernel dumps (wrong type?) [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE353 0xE7). [...] [drm] register mmio base: 0xFCE00000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] probing gen 2 caps for device 1022:1453 = 737903/e [...] [drm] probing mlw for device 1002:67df = 440903 [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] ATOM BIOS: 113-4E353BU-O4E [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mc.bin [...] drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [...] drmn0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF [...] Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0; [...] [drm] Detected VRAM RAM=8192M, BAR=256M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 8338852 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 8192M of VRAM memory ready [...] [drm] amdgpu: 8192M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-D-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-D-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD6 [...] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] DP-2 [...] [drm] HPD4 [...] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] HDMI-A-1 [...] [drm] HPD1 [...] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] Connector 3: [...] [drm] HDMI-A-2 [...] [drm] HPD5 [...] [drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877 [...] [drm] Encoders: [...] [drm] DFP4: INTERNAL_UNIPHY1 [...] [drm] Connector 4: [...] [drm] DVI-D-1 [...] [drm] HPD3 [...] [drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f [...] [drm] Encoders: [...] [drm] DFP5: INTERNAL_UNIPHY [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_pfp_2.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_me_2.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_ce_2.bin [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_rlc.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec_2.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec2_2.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma.bin [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma1.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_uvd.bin [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_vce.bin [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] drmn0: successfully loaded firmware image with name: amdgpu/polaris10_k_smc.bin [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] [drm] fb mappable at 0xE0568000 [...] [drm] vram apper at 0xE0000000 [...] [drm] size 33177600 [...] [drm] fb depth is 24 [...] [drm] pitch is 15360 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=2160 width=3840 depth=32 [...] cmsize=16 size=33177600 [...] pbase=0xe0568000 vbase=0xfffff800e0568000 [...] name=drmn0 flags=0x0 stride=15360 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] i_size_write unimplemented [...] [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] ums0 on uhub2 [...] ums0: <vendor 0x1ea7 USB Gaming Mouse, class 0/0, rev 1.10/2.00, addr 3> on usbus1 [...] ums0: 8 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <vendor 0x1ea7 USB Gaming Mouse, class 0/0, rev 1.10/2.00, addr 3> on usbus1 [...] ums1 on uhub1 [...] ums1: <vendor 0x04b4 product 0x6018, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <Burr-Brown from TI USB Audio DAC, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums1: 5 buttons and [XYZT] coordinates ID=1 [...] ums2 on uhub1 [...] ums2: <vendor 0x1d57 product 0xad02, class 0/0, rev 1.10/1.05, addr 2> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <Burr-Brown from TI USB Audio DAC, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums2: 5 buttons and [XYZ] coordinates ID=5 [...] uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No recording. [...] uaudio0: No MIDI sequencer. [...] pcm9: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] re0: link state changed to UP [...] bridge0: Ethernet address: ... [...] bridge0: changing name to 'vm-public' [...] vlan0: changing name to 're0.21' [...] re0: promiscuous mode enabled [...] vm-public: link state changed to UP [...] re0.21: promiscuous mode enabled [...] bridge1: Ethernet address: ... [...] bridge1: changing name to 'vm-sw23' [...] vlan1: changing name to 're0.23' [...] re0.23: promiscuous mode enabled [...] vm-sw23: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] tun0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (5316 512 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (5316 512 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <unknown HUAWEI> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0100 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen1.7: <unknown HUAWEI> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (5316 512 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <unknown HUAWEI> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0100 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] ugen1.7: <unknown HUAWEI> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (5316 512 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 [...] umass2 on uhub0 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 2MB (1329 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (cd0:umass-sim2:2:0:0): READ TOC/PMA/ATIP. CDB: 43 02 00 00 00 00 01 00 0c 00 [...] (cd0:umass-sim2:2:0:0): CAM status: SCSI Status Error [...] (cd0:umass-sim2:2:0:0): SCSI status: Check Condition [...] (cd0:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (cd0:umass-sim2:2:0:0): Error 22, Unretryable error [...] ugen1.7: <HUAWEI POT-LX1> at usbus1 (disconnected) [...] umass2: at uhub0, port 3, addr 6 (disconnected) [...] cd0 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd0: <Linux File-CD Gadget 0409> detached [...] (cd0:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] [drm:amdgpu_atombios_dp_link_train_cr] displayport link status failed [...] [drm:amdgpu_atombios_dp_link_train_cr] clock recovery failed