[...] MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 [...] ioapic0: ver 0x20 maxredir 0x17 [...] ioapic0: Routing external 8259A's -> intpin 0 [...] MADT: Interrupt override: source 0, irq 2 [...] ioapic0: Routing IRQ 0 -> intpin 2 [...] MADT: Interrupt override: source 9, irq 9 [...] ioapic0: intpin 9 trigger: level [...] lapic0: Routing NMI -> LINT1 [...] lapic0: LINT1 trigger: edge [...] lapic0: LINT1 polarity: high [...] lapic1: Routing NMI -> LINT1 [...] lapic1: LINT1 trigger: edge [...] lapic1: LINT1 polarity: high [...] lapic2: Routing NMI -> LINT1 [...] lapic2: LINT1 trigger: edge [...] lapic2: LINT1 polarity: high [...] lapic3: Routing NMI -> LINT1 [...] lapic3: LINT1 trigger: edge [...] lapic3: LINT1 polarity: high [...] MADT: Ignoring local NMI routed to ACPI CPU 4 [...] MADT: Ignoring local NMI routed to ACPI CPU 5 [...] MADT: Ignoring local NMI routed to ACPI CPU 6 [...] MADT: Ignoring local NMI routed to ACPI CPU 7 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] lapic: Divisor 2, Frequency 49887792 Hz [...] lapic: deadline tsc mode, Frequency 2893491512 Hz [...] cpu0 BSP: [...] ID: 0x00000000 VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1 [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000000f2 [...] SMP: AP CPU #1 Launched! [...] cpu1 AP: [...] ID: 0x00000001 VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1 [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000100f2 [...] lapic2: CMCI unmasked [...] SMP: AP CPU #2 Launched! [...] cpu2 AP: [...] ID: 0x00000002 VER: 0x01060015 LDR: 0x00000004 DFR: 0x00000000 x2APIC: 1 [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000000f2 [...] SMP: AP CPU #3 Launched! [...] cpu3 AP: [...] ID: 0x00000003 VER: 0x01060015 LDR: 0x00000008 DFR: 0x00000000 x2APIC: 1 [...] lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff [...] timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 [...] cmci: 0x000100f2 [...] SMP: passed TSC synchronization test [...] TSC timecounter discards lower 1 bit(s) [...] Timecounter "TSC-low" frequency 1446745756 Hz quality 1000 [...] random: entropy device external interface [...] wlan: <802.11 Link Layer> [...] snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] [...] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 [...] EFI Runtime entry 49 mapping attributes unsupported [...] mem: <memory> [...] md0: Preloaded image </data/XXXXXXXXXXXX 14417920 bytes at 0xffffffff82682c10 [...] 000.000022 [4335] netmap_init netmap: loaded module [...] null: <full device, null device, zero device> [...] [ath_hal] loaded [...] nfslock: pseudo-device [...] crypto: <crypto core> [...] tcp_log: tcp_log device [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] io: <I/O> [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd: new array size 4 [...] kbd1 at kbdmux0 [...] hptnr: R750/DC7280 controller driver v1.1.5 [...] hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 [...] hpt27xx: RocketRAID 27xx controller driver v1.2.8 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] crypto: assign cryptosoft0 driver id 0, flags 0x6000000 [...] crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0 [...] crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 [...] acpi0: <HPQOEM SLIC-MPC> on motherboard [...] ACPI: 5 ACPI AML tables successfully acquired and loaded [...] PCIe: Memory Mapped configuration base @ 0xe0000000 [...] ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 [...] acpi0: Power Button (fixed) [...] acpi0: wakeup code va 0xfffffe00041ff000 pa 0x99000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0 [...] cpu0: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF80004B78000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [...] cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1 [...] cpu1: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF8000407C800 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF80004BA7E00 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [...] cpu2: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 2 [...] cpu2: <ACPI CPU> on acpi0 [...] cpu3: Processor \134_PR_.CPU3 (ACPI ID 3) -> APIC ID 3 [...] cpu3: <ACPI CPU> on acpi0 [...] ACPI: Processor \134_PR_.CPU4 (ACPI ID 4) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU5 (ACPI ID 5) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU6 (ACPI ID 6) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU7 (ACPI ID 7) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route [...] hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic [...] hpet0: t1: irqs 0x00f00000 (0), MSI [...] hpet0: t2: irqs 0x00f00800 (0), MSI [...] hpet0: t3: irqs 0x00f01000 (0), MSI [...] hpet0: t4: irqs 0x00000000 (0), MSI [...] hpet0: t5: irqs 0x00000000 (0), MSI [...] hpet0: t6: irqs 0x00000000 (0), MSI [...] hpet0: t7: irqs 0x00000000 (0), MSI [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] msi: routing MSI-X IRQ 256 to local APIC 2 vector 48 [...] msi: routing MSI-X IRQ 257 to local APIC 0 vector 49 [...] msi: routing MSI-X IRQ 258 to local APIC 2 vector 49 [...] msi: routing MSI-X IRQ 259 to local APIC 0 vector 50 [...] msi: routing MSI-X IRQ 260 to local APIC 2 vector 50 [...] msi: routing MSI-X IRQ 261 to local APIC 0 vector 51 [...] msi: routing MSI-X IRQ 262 to local APIC 2 vector 51 [...] msi: routing MSI-X IRQ 263 to local APIC 0 vector 52 [...] msi: Assigning MSI-X IRQ 256 to local APIC 0 vector 53 [...] msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48 [...] msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48 [...] msi: Assigning MSI-X IRQ 260 to local APIC 0 vector 49 [...] msi: Assigning MSI-X IRQ 262 to local APIC 0 vector 50 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48 [...] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54 [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 [...] pci_link0: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link1: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link2: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link3: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link4: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link5: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link6: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] pci_link7: Index IRQ Rtd Ref IRQs [...] Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: decoding 5 range 0-0x3e [...] pcib0: decoding 4 range 0-0xcf7 [...] pcib0: decoding 4 range 0xd00-0xffff [...] pcib0: decoding 3 range 0xa0000-0xbffff [...] pcib0: decoding 3 range 0xc0000000-0xdfffffff [...] pcib0: decoding 3 range 0xf0000000-0xfedfffff [...] pcib0: decoding 3 range 0xfee01000-0xffffffff [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: domain=0, physical bus=0 [...] found-> vendor=0x8086, dev=0x0154, revid=0x09 [...] domain=0, bus=0, slot=0, func=0 [...] class=06-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x8086, dev=0x0151, revid=0x09 [...] domain=0, bus=0, slot=1, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=1, subbus=1 [...] found-> vendor=0x8086, dev=0x1e31, revid=0x04 [...] domain=0, bus=0, slot=20, func=0 [...] class=0c-03-30, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 8 messages, 64 bit [...] map[10]: type Memory, range 64, base 0xd4420000, size 16, memory disabled [...] pcib0: allocated type 3 (0xd4420000-0xd442ffff) for rid 10 of pci0:0:20:0 [...] found-> vendor=0x8086, dev=0x1e3a, revid=0x04 [...] domain=0, bus=0, slot=22, func=0 [...] class=07-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xd4434000, size 4, enabled [...] pcib0: allocated type 3 (0xd4434000-0xd443400f) for rid 10 of pci0:0:22:0 [...] found-> vendor=0x8086, dev=0x1e3d, revid=0x04 [...] domain=0, bus=0, slot=22, func=3 [...] class=07-00-02, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0000, statreg=0x00b0, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type I/O Port, range 32, base 0x5050, size 3, port disabled [...] pcib0: allocated type 4 (0x5050-0x5057) for rid 10 of pci0:0:22:3 [...] map[14]: type Memory, range 32, base 0xd443b000, size 12, memory disabled [...] pcib0: allocated type 3 (0xd443b000-0xd443bfff) for rid 14 of pci0:0:22:3 [...] found-> vendor=0x8086, dev=0x1502, revid=0x04 [...] domain=0, bus=0, slot=25, func=0 [...] class=02-00-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 32, base 0xd4400000, size 17, enabled [...] pcib0: allocated type 3 (0xd4400000-0xd441ffff) for rid 10 of pci0:0:25:0 [...] map[14]: type Memory, range 32, base 0xd443a000, size 12, enabled [...] pcib0: allocated type 3 (0xd443a000-0xd443afff) for rid 14 of pci0:0:25:0 [...] map[18]: type I/O Port, range 32, base 0x5020, size 5, port disabled [...] pcib0: allocated type 4 (0x5020-0x503f) for rid 18 of pci0:0:25:0 [...] found-> vendor=0x8086, dev=0x1e2d, revid=0x04 [...] domain=0, bus=0, slot=26, func=0 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] map[10]: type Memory, range 32, base 0xd4439000, size 10, enabled [...] pcib0: allocated type 3 (0xd4439000-0xd44393ff) for rid 10 of pci0:0:26:0 [...] found-> vendor=0x8086, dev=0x1e20, revid=0x04 [...] AcpiOsExecute: task queue not started [...] domain=0, bus=0, slot=27, func=0 [...] class=04-03-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xd4430000, size 14, memory disabled [...] pcib0: allocated type 3 (0xd4430000-0xd4433fff) for rid 10 of pci0:0:27:0 [...] found-> vendor=0x8086, dev=0x1e10, revid=0xc4 [...] domain=0, bus=0, slot=28, func=0 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=2, subbus=2 [...] found-> vendor=0x8086, dev=0x1e12, revid=0xc4 [...] domain=0, bus=0, slot=28, func=1 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=3, subbus=35 [...] found-> vendor=0x8086, dev=0x1e14, revid=0xc4 [...] domain=0, bus=0, slot=28, func=2 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=c, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=36, subbus=36 [...] found-> vendor=0x8086, dev=0x1e16, revid=0xc4 [...] domain=0, bus=0, slot=28, func=3 [...] class=06-04-00, hdrtype=0x01, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=d, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] MSI supports 1 message [...] secbus=37, subbus=37 [...] found-> vendor=0x8086, dev=0x1e26, revid=0x04 [...] domain=0, bus=0, slot=29, func=0 [...] class=0c-03-20, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 2 supports D0 D3 current D0 [...] map[10]: type Memory, range 32, base 0xd4438000, size 10, enabled [...] pcib0: allocated type 3 (0xd4438000-0xd44383ff) for rid 10 of pci0:0:29:0 [...] found-> vendor=0x8086, dev=0x1e55, revid=0x04 [...] domain=0, bus=0, slot=31, func=0 [...] class=06-01-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] found-> vendor=0x8086, dev=0x1e03, revid=0x04 [...] domain=0, bus=0, slot=31, func=2 [...] class=01-06-01, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type I/O Port, range 32, base 0x5048, size 3, enabled [...] pcib0: allocated type 4 (0x5048-0x504f) for rid 10 of pci0:0:31:2 [...] map[14]: type I/O Port, range 32, base 0x505c, size 2, enabled [...] pcib0: allocated type 4 (0x505c-0x505f) for rid 14 of pci0:0:31:2 [...] map[18]: type I/O Port, range 32, base 0x5040, size 3, enabled [...] pcib0: allocated type 4 (0x5040-0x5047) for rid 18 of pci0:0:31:2 [...] map[1c]: type I/O Port, range 32, base 0x5058, size 2, enabled [...] pcib0: allocated type 4 (0x5058-0x505b) for rid 1c of pci0:0:31:2 [...] map[20]: type I/O Port, range 32, base 0x5000, size 5, enabled [...] pcib0: allocated type 4 (0x5000-0x501f) for rid 20 of pci0:0:31:2 [...] map[24]: type Memory, range 32, base 0xd4437000, size 11, enabled [...] pcib0: allocated type 3 (0xd4437000-0xd44377ff) for rid 24 of pci0:0:31:2 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1 [...] pcib0: allocated type 3 (0xd4300000-0xd43fffff) for rid 20 of pcib1 [...] pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 24 of pcib1 [...] pcib1: domain 0 [...] pcib1: secondary bus 1 [...] pcib1: subordinate bus 1 [...] pcib1: I/O decode 0x4000-0x4fff [...] pcib1: memory decode 0xd4300000-0xd43fffff [...] pcib1: prefetched decode 0xc0000000-0xcfffffff [...] pcib1: special decode VGA [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib1: allocated bus range (1-1) for rid 0 of pci1 [...] pci1: domain=0, physical bus=1 [...] found-> vendor=0x1002, dev=0x6841, revid=0x00 [...] domain=0, bus=1, slot=0, func=0 [...] class=03-00-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D1 D2 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled [...] pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 10 of pci0:1:0:0 [...] map[18]: type Memory, range 64, base 0xd4300000, size 17, enabled [...] pcib1: allocated memory range (0xd4300000-0xd431ffff) for rid 18 of pci0:1:0:0 [...] map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled [...] pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:0:0 [...] found-> vendor=0x1002, dev=0xaa90, revid=0x00 [...] domain=0, bus=1, slot=0, func=1 [...] class=04-03-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=b, irq=255 [...] powerspec 3 supports D0 D1 D2 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xd4320000, size 14, memory disabled [...] pcib1: allocated memory range (0xd4320000-0xd4323fff) for rid 10 of pci0:1:0:1 [...] vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xcfffffff,0xd4300000-0xd431ffff at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV930 HDA Controller> mem 0xd4320000-0xd4323fff at device 0.1 on pci1 [...] hdac0: PCI card vendor: 0x103c, device: 0x17a9 [...] hdac0: HDA Driver Revision: 20120126_0002 [...] hdac0: Config options: on=0x00000000 off=0x00000000 [...] hdac0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 264 to local APIC 2 vector 48 [...] hdac0: using IRQ 264 for MSI [...] hdac0: Caps: OSS 1, ISS 0, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4420000-0xd442ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: attempting to allocate 1 MSI vectors (8 supported) [...] msi: routing MSI IRQ 265 to local APIC 0 vector 56 [...] xhci0: using IRQ 265 for MSI [...] xhci0: MSI enabled [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] xhci0: usbpf: Attached [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0x5050-0x5057 mem 0xd443b000-0xd443bfff at device 22.3 on pci0 [...] uart2: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 266 to local APIC 2 vector 50 [...] uart2: using IRQ 266 for MSI [...] uart2: Using 1 MSI message [...] uart2: fast interrupt [...] uart2: PPS capture mode: DCD [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x5020-0x503f mem 0xd4400000-0xd441ffff,0xd443a000-0xd443afff at device 25.0 on pci0 [...] em0: attach_pre capping queues at 1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: msix_init qsets capped at 1 [...] em0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 267 to local APIC 0 vector 57 [...] em0: using IRQ 267 for MSI [...] em0: Using an MSI interrupt [...] em0: allocated for 1 tx_queues [...] em0: allocated for 1 rx_queues [...] msi: Assigning MSI IRQ 267 to local APIC 3 vector 49 [...] msi: Assigning MSI IRQ 267 to local APIC 2 vector 51 [...] em0: bpf attached [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd4439000-0xd44393ff at device 26.0 on pci0 [...] pcib0: matched entry for 0.26.INTA [...] pcib0: slot 26 INTA hardwired to IRQ 16 [...] ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 52 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] ehci0: usbpf: Attached [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xd4430000-0xd4433fff at device 27.0 on pci0 [...] hdac1: PCI card vendor: 0x103c, device: 0x17a7 [...] hdac1: HDA Driver Revision: 20120126_0002 [...] hdac1: Config options: on=0x00000000 off=0x00000000 [...] hdac1: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 268 to local APIC 0 vector 57 [...] hdac1: using IRQ 268 for MSI [...] hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib0: allocated type 3 (0xd4200000-0xd42fffff) for rid 20 of pcib2 [...] pcib2: domain 0 [...] pcib2: secondary bus 2 [...] pcib2: subordinate bus 2 [...] pcib2: memory decode 0xd4200000-0xd42fffff [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib2: allocated bus range (2-2) for rid 0 of pci2 [...] pci2: domain=0, physical bus=2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pcib3: Unable to activate hot plug feature. [...] pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3 [...] pcib0: allocated type 3 (0xd0000000-0xd3ffffff) for rid 20 of pcib3 [...] pcib3: domain 0 [...] pcib3: secondary bus 3 [...] pcib3: subordinate bus 35 [...] pcib3: I/O decode 0x2000-0x3fff [...] pcib3: memory decode 0xd0000000-0xd3ffffff [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib3: allocated bus range (3-3) for rid 0 of pci3 [...] pci3: domain=0, physical bus=3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pcib0: allocated type 3 (0xd4100000-0xd41fffff) for rid 20 of pcib4 [...] pcib4: domain 0 [...] pcib4: secondary bus 36 [...] pcib4: subordinate bus 36 [...] pcib4: memory decode 0xd4100000-0xd41fffff [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib4: allocated bus range (36-36) for rid 0 of pci4 [...] pci4: domain=0, physical bus=36 [...] found-> vendor=0x197b, dev=0x2380, revid=0x30 [...] domain=0, bus=36, slot=0, func=0 [...] class=0c-00-10, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 32, base 0xd4100000, size 11, enabled [...] pcib4: allocated memory range (0xd4100000-0xd41007ff) for rid 10 of pci0:36:0:0 [...] map[14]: type Memory, range 32, base 0xd4105000, size 8, enabled [...] pcib4: allocated memory range (0xd4105000-0xd41050ff) for rid 14 of pci0:36:0:0 [...] found-> vendor=0x197b, dev=0x2392, revid=0x30 [...] domain=0, bus=36, slot=0, func=1 [...] class=08-80-00, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 32, base 0xd4104000, size 8, memory disabled [...] pcib4: allocated memory range (0xd4104000-0xd41040ff) for rid 10 of pci0:36:0:1 [...] found-> vendor=0x197b, dev=0x2391, revid=0x30 [...] domain=0, bus=36, slot=0, func=2 [...] class=08-05-01, hdrtype=0x00, mfdev=1 [...] cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message [...] map[10]: type Memory, range 32, base 0xd4103000, size 8, enabled [...] pcib4: allocated memory range (0xd4103000-0xd41030ff) for rid 10 of pci0:36:0:2 [...] fwohci0: vendor=197b, dev=2380 [...] fwohci0: vendor=197b, dev=2380 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd4100000-0xd41007ff,0xd4105000-0xd41050ff at device 0.0 on pci4 [...] pcib4: matched entry for 36.0.INTA [...] pcib4: slot 0 INTA hardwired to IRQ 18 [...] ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 53 [...] fwohci0: OHCI version 1.10 (ROM=0) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 2 ports. [...] fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100 [...] fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100 [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100 [...] fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100 [...] pci4: <base peripheral> at device 0.1 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0xd4103000-0xd41030ff at device 0.2 on pci4 [...] sdhci_pci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 269 to local APIC 0 vector 58 [...] sdhci_pci0: using IRQ 269 for MSI [...] sdhci_pci0-slot0: 50MHz 4bits VDD: 3.3V VCCQ: 3.3V DRV: B DMA removable [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x0000ad01 [...] sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 [...] sdhci_pci0-slot0: Present: 0x00080000 | Host ctl: 0x00000000 [...] sdhci_pci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 [...] sdhci_pci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000000 | Sig enab: 0x00000000 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 [...] sdhci_pci0-slot0: Caps: 0x054032b2 | Caps2: 0x00000007 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0: 1 slot(s) allocated [...] pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pcib0: allocated type 3 (0xd4000000-0xd40fffff) for rid 20 of pcib5 [...] pcib5: domain 0 [...] pcib5: secondary bus 37 [...] pcib5: subordinate bus 37 [...] pcib5: memory decode 0xd4000000-0xd40fffff [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib5: allocated bus range (37-37) for rid 0 of pci5 [...] pci5: domain=0, physical bus=37 [...] found-> vendor=0x8086, dev=0x0082, revid=0x34 [...] domain=0, bus=37, slot=0, func=0 [...] class=02-80-00, hdrtype=0x00, mfdev=0 [...] cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) [...] lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) [...] intpin=a, irq=255 [...] powerspec 3 supports D0 D3 current D0 [...] MSI supports 1 message, 64 bit [...] map[10]: type Memory, range 64, base 0xd4000000, size 13, memory disabled [...] pcib5: allocated memory range (0xd4000000-0xd4001fff) for rid 10 of pci0:37:0:0 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xd4000000-0xd4001fff at device 0.0 on pci5 [...] iwn0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 270 to local APIC 2 vector 54 [...] iwn0: using IRQ 270 for MSI [...] iwn0: MIMO 2T2R, MoW, address XXX [...] arc4random: no preloaded entropy cache [...] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [...] iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [...] iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [...] iwn0: 2T2R [...] iwn0: 11na MCS 20MHz [...] iwn0: MCS 0-7: 6.5Mbps - 65Mbps [...] iwn0: MCS 8-15: 13Mbps - 130Mbps [...] iwn0: 11na MCS 20MHz SGI [...] iwn0: MCS 0-7: 7Mbps - 72Mbps [...] iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps [...] iwn0: 11na MCS 40MHz: [...] iwn0: MCS 0-7: 13.5Mbps - 135Mbps [...] iwn0: MCS 8-15: 27Mbps - 270Mbps [...] iwn0: 11na MCS 40MHz SGI: [...] iwn0: MCS 0-7: 15Mbps - 150Mbps [...] iwn0: MCS 8-15: 30Mbps - 300Mbps [...] iwn0: 11ng MCS 20MHz [...] iwn0: MCS 0-7: 6.5Mbps - 65Mbps [...] iwn0: MCS 8-15: 13Mbps - 130Mbps [...] iwn0: 11ng MCS 20MHz SGI [...] iwn0: MCS 0-7: 7Mbps - 72Mbps [...] iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps [...] iwn0: 11ng MCS 40MHz: [...] iwn0: MCS 0-7: 13.5Mbps - 135Mbps [...] iwn0: MCS 8-15: 27Mbps - 270Mbps [...] iwn0: 11ng MCS 40MHz SGI: [...] iwn0: MCS 0-7: 15Mbps - 150Mbps [...] iwn0: MCS 8-15: 30Mbps - 300Mbps [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4438000-0xd44383ff at device 29.0 on pci0 [...] pcib0: matched entry for 0.29.INTA [...] pcib0: slot 29 INTA hardwired to IRQ 16 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] ehci1: usbpf: Attached [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x5048-0x504f,0x505c-0x505f,0x5040-0x5047,0x5058-0x505b,0x5000-0x501f mem 0xd4437000-0xd44377ff at device 31.2 on pci0 [...] ahci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 271 to local APIC 0 vector 59 [...] ahci0: using IRQ 271 for MSI [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahci0: Caps: 64bit NCQ SS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports [...] ahci0: Caps2: APST [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich0: Caps: [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich1: Caps: [...] ahcich2: not probed (disabled) [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich3: Caps: ESP [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich4: Caps: ESP [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich5: Caps: ESP [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] AcpiOsExecute: task queue not started [...] battery1: <ACPI Control Method Battery> on acpi0 [...] AcpiOsExecute: task queue not started [...] acpi_acad0: <AC Adapter> on acpi0 [...] AcpiOsExecute: task queue not started [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz3: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz4: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz5: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz6: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_tz7: <Thermal Zone> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] atkbd: the current kbd controller command byte 0047 [...] atkbd: keyboard ID 0x41ab (2) [...] kbdc: RESET_KBD return code:00fa [...] kbdc: RESET_KBD status:00aa [...] kbd0 at atkbd0 [...] kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 [...] ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 55 [...] atkbd0: [GIANT-LOCKED] [...] psm0: unable to allocate IRQ [...] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 [...] psm0: current command byte:0047 [...] kbdc: TEST_AUX_PORT status:0000 [...] kbdc: RESET_AUX return code:00fa [...] kbdc: RESET_AUX status:00aa [...] kbdc: RESET_AUX ID:0000 [...] kbdc: RESET_AUX return code:00fa [...] kbdc: RESET_AUX status:00aa [...] kbdc: RESET_AUX ID:0000 [...] psm: status 00 02 64 [...] psm: status 00 00 64 [...] psm: status 00 46 12 [...] psm: status 05 47 17 [...] psm: status 01 c0 b1 [...] psm: status d0 00 33 [...] psm: status 28 80 4a [...] psm: status 64 00 00 [...] psm: status 0a 04 00 [...] psm: status b1 bd 97 [...] psm: status 18 55 40 [...] psm: status 00 02 64 [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons [...] psm0: config:00004000, flags:00000008, packet size:3 [...] psm0: syncmask:00, syncbits:00 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 56 [...] uart0: fast interrupt [...] uart0: PPS capture mode: DCD [...] ppc1: using extended I/O port range [...] ppc1: SPP ECP ECP+EPP [...] ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77a irq 5 on acpi0 [...] ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc1: FIFO with 16/16/15 bytes threshold [...] ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 61 [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Enabled 5 GPEs in block 00 to 3F [...] AcpiOsExecute: task queue not started [...] pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 [...] pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 [...] ahc_isa_identify 0: ioport 0xc00 alloc failed [...] ahc_isa_identify 1: ioport 0x1c00 alloc failed [...] ahc_isa_identify 2: ioport 0x2c00 alloc failed [...] ahc_isa_identify 3: ioport 0x3c00 alloc failed [...] ahc_isa_identify 4: ioport 0x4c00 alloc failed [...] ahc_isa_identify 5: ioport 0x5c00 alloc failed [...] ahc_isa_identify 6: ioport 0x6c00 alloc failed [...] ahc_isa_identify 7: ioport 0x7c00 alloc failed [...] ahc_isa_identify 8: ioport 0x8c00 alloc failed [...] ahc_isa_identify 9: ioport 0x9c00 alloc failed [...] ahc_isa_identify 10: ioport 0xac00 alloc failed [...] ahc_isa_identify 11: ioport 0xbc00 alloc failed [...] ahc_isa_identify 12: ioport 0xcc00 alloc failed [...] ahc_isa_identify 13: ioport 0xdc00 alloc failed [...] ahc_isa_identify 14: ioport 0xec00 alloc failed [...] isa_probe_children: disabling PnP devices [...] atkbdc: atkbdc0 already exists; skipping it [...] atrtc: atrtc0 already exists; skipping it [...] attimer: attimer0 already exists; skipping it [...] sc: sc0 already exists; skipping it [...] uart: uart0 already exists; skipping it [...] isa_probe_children: probing non-PnP devices [...] sc0 failed to probe on isa0 [...] vga0 failed to probe on isa0 [...] pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 [...] pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 [...] fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 [...] ppc0: cannot reserve I/O port range [...] ppc0 failed to probe at irq 7 on isa0 [...] pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 [...] uart1 failed to probe at port 0x2f8 irq 3 on isa0 [...] isa_probe_children: probing PnP devices [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] AcpiOsExecute: task queue not started [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est1: <Enhanced SpeedStep Frequency Control> on cpu1 [...] est2: <Enhanced SpeedStep Frequency Control> on cpu2 [...] est3: <Enhanced SpeedStep Frequency Control> on cpu3 [...] Device configuration finished. [...] procfs registered [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] lo0: bpf attached [...] vlan: initialized, using hash tables with chaining [...] tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072 [...] IPsec: Initialized Security Association Processing. [...] AcpiOsExecute: enqueue 9 pending tasks [...] battery1: battery0: battery initialization start [...] battery initialization start [...] hptnr: no controller detected. [...] hptrr: no controller detected. [...] hpt27xx: no controller detected. [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: Subsystem ID: 0x00aa0100 [...] hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 [...] hdaa0: Original pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: Patched pins configuration: [...] hdaa0: nid 0x as seq device conn jack loc color misc [...] hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 [...] hdaa0: 1 associations found: [...] hdaa0: Association 0 (1) out: [...] hdaa0: Pin nid=3 seq=0 [...] hdaa0: Tracing association 0 (1) [...] hdaa0: Pin 3 traced to DAC 2 [...] hdaa0: Association 0 (1) trace succeeded [...] hdaa0: Looking for additional DAC for association 0 (1) [...] hdaa0: Tracing input monitor [...] hdaa0: Tracing other input monitors [...] hdaa0: Tracing beeper [...] hdaa0: Pin sense: nid=3 sense=0x7fffffff (disconnected, ELD valid) [...] hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm0: Playback: [...] pcm0: Stream cap: 0x00000005 AC3 PCM [...] pcm0: PCM cap: 0x00020070 16 bits, 32 44 48 KHz [...] pcm0: DAC: 2 [...] pcm0: [...] pcm0: nid=3 [pin: Digital-out (Jack)] [...] pcm0: + <- nid=2 [audio output] [src: pcm] [...] pcm0: [...] pcm0: Mixer "vol" -> "none": child=0x00000010 [...] pcm0: Mixer "pcm": parent="vol" [...] pcm0: Soft PCM mixer ENABLED [...] pcm0: Playback channel set is: Front Left, Front Right, [...] pcm0: Playback channel matrix is: 2.0 (disconnected) [...] ahcich0: AHCI reset... [...] hdacc1: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac1 [...] ahcich0: SATA connect time=1000us status=00000123 [...] hdaa1: ahcich0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc1 [...] AHCI reset: device found [...] hdaa1: Subsystem ID: 0x103c17bd [...] ahcich1: AHCI reset... [...] hdaa1: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 [...] hdaa1: GPIO0: disabled [...] ahcich1: hdaa1: GPIO1: disabled [...] hdaa1: GPIO2: disabled [...] SATA connect time=1800us status=00000113 [...] ahcich1: AHCI reset: device found [...] ahcich1: AHCI reset: device ready after 0ms [...] hdaa1: Original pins configuration: [...] ahcich3: hdaa1: AHCI reset... [...] nid 0x as seq device conn jack loc color misc [...] hdaa1: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 [...] hdaa1: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 [...] hdaa1: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 [...] hdaa1: 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 [...] ahcich3: hdaa1: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 [...] hdaa1: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 [...] hdaa1: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 [...] hdaa1: SATA connect timeout time=10000us status=00000000 [...] ahcich3: AHCI reset: device not found [...] 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 [...] ahcich4: hdaa1: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 [...] hdaa1: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 [...] AHCI reset... [...] hdaa1: Patched pins configuration: [...] hdaa1: nid 0x as seq device conn jack loc color misc [...] hdaa1: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 [...] hdaa1: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 [...] ahcich4: hdaa1: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 [...] hdaa1: SATA connect timeout time=10000us status=00000000 [...] ahcich4: AHCI reset: device not found [...] 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 [...] ahcich5: hdaa1: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 DISA [...] hdaa1: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 [...] hdaa1: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 DISA [...] AHCI reset... [...] hdaa1: 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 [...] hdaa1: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 DISA [...] hdaa1: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 DISA [...] hdaa1: 4 associations found: [...] ahcich5: hdaa1: Association 0 (1) out: [...] hdaa1: Pin nid=13 seq=0 [...] hdaa1: Pin nid=11 seq=15 [...] hdaa1: Association 1 (2) in: [...] hdaa1: Pin nid=12 seq=0 [...] hdaa1: Pin nid=15 seq=14 [...] SATA connect timeout time=10000us status=00000000 [...] ahcich5: hdaa1: Association 2 (3) out: [...] hdaa1: Pin nid=10 seq=0 [...] hdaa1: Association 3 (4) in: [...] hdaa1: Pin nid=17 seq=0 [...] hdaa1: Tracing association 0 (1) [...] AHCI reset: device not found [...] hdaa1: Pin 13 traced to DAC 19 [...] hdaa1: Pin 11 traced to DAC 19 and hpredir 0 [...] hdaa1: Association 0 (1) trace succeeded [...] hdaa1: Tracing association 1 (2) [...] hdaa1: Pin 12 traced to ADC 21 [...] hdaa1: Pin 15 traced to ADC 21 [...] hdaa1: Association 1 (2) trace succeeded [...] hdaa1: Tracing association 2 (3) [...] hdaa1: Pin 10 traced to DAC 20 [...] hdaa1: Association 2 (3) trace succeeded [...] hdaa1: Tracing association 3 (4) [...] hdaa1: Pin 17 traced to ADC 22 [...] hdaa1: Association 3 (4) trace succeeded [...] hdaa1: Looking for additional DAC for association 0 (1) [...] hdaa1: Looking for additional ADC for association 1 (2) [...] hdaa1: Looking for additional DAC for association 2 (3) [...] hdaa1: Looking for additional ADC for association 3 (4) [...] hdaa1: Tracing input monitor [...] hdaa1: Tracing nid 27 to out [...] hdaa1: nid 27 is input monitor [...] hdaa1: Tracing other input monitors [...] hdaa1: Tracing nid 12 to out [...] hdaa1: Tracing nid 15 to out [...] hdaa1: Tracing nid 17 to out [...] hdaa1: Tracing beeper [...] hdaa1: Headphones redirection for association 0 nid=11 using unsolicited responses. [...] hdaa1: Pin sense: nid=11 sense=0x80000000 (connected) [...] hdaa1: Redirect output to: headphones [...] hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref [...] pcm1: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa1 [...] pcm1: Playback: [...] pcm1: Stream cap: 0x00000001 PCM [...] pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz [...] pcm1: DAC: 19 [...] pcm1: [...] pcm1: nid=13 [pin: Speaker (Fixed)] [...] pcm1: + <- nid=19 [audio output] [src: pcm] [...] pcm1: [...] pcm1: nid=11 [pin: Headphones (Black Jack)] [...] pcm1: + <- nid=19 [audio output] [src: pcm] [...] pcm1: [...] pcm1: Record: [...] pcm1: Stream cap: 0x00000001 PCM [...] pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz [...] battery0: pcm1: ADC: 21 [...] pcm1: battery initialization done, tried 1 times [...] acpi_acad0: acline initialization start [...] [...] acpi_acad0: pcm1: nid=21 [audio input] [...] pcm1: + <- nid=23 [audio selector] [src: line, mic, mix] [...] pcm1: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] [...] pcm1: + <- nid=15 [pin: Line-in (Black Jack)]On Line [...] acpi_acad0: acline initialization done, tried 1 times [...] [src: line] [...] pcm1: + <- nid=27 [audio mixer] [src: mix] [...] pcm1: [...] pcm1: Input Mix: [...] pcm1: [...] pcm1: nid=27 [audio mixer] [...] pcm1: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] [...] pcm1: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] [...] pcm1: [...] pcm1: Master Volume (OSS: vol): -95/0dB [...] pcm1: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute [...] pcm1: [...] pcm1: PCM Volume (OSS: pcm): -95/0dB [...] pcm1: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute [...] pcm1: [...] pcm1: Microphone Volume (OSS: mic): 0/30dB [...] pcm1: +- ctl 2 (nid 12 out): 0/30dB (4 steps) [...] pcm1: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute [...] pcm1: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute [...] pcm1: [...] pcm1: Line-in Volume (OSS: line): 0/30dB [...] pcm1: +- ctl 4 (nid 15 out): 0/30dB (4 steps) [...] pcm1: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute [...] pcm1: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute [...] pcm1: [...] pcm1: Speaker/Beep Volume (OSS: speaker): -18/0dB [...] pcm1: +- ctl 20 (nid 33 out): -18/0dB (4 steps) + mute [...] pcm1: [...] pcm1: Recording Level (OSS: rec): 0/22dB [...] pcm1: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute [...] pcm1: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute [...] pcm1: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute [...] pcm1: [...] pcm1: Input Mix Level (OSS: mix): 0/22dB [...] pcm1: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute [...] pcm1: [...] pcm1: Mixer "vol": [...] pcm1: Mixer "pcm": [...] pcm1: Mixer "speaker": [...] pcm1: Mixer "line": [...] pcm1: Mixer "mic": [...] pcm1: Mixer "mix": [...] pcm1: Mixer "rec": [...] pcm1: Mixer "ogain": [...] pcm1: Playback channel set is: Front Left, Front Right, [...] pcm1: Playback channel matrix is: 2.0 (connected) [...] pcm1: Recording channel set is: Front Left, Front Right, [...] pcm1: Recording channel matrix is: 2.0 (disconnected) [...] ahcich0: ugen2.1: <Intel EHCI root HUB> at usbus2 [...] AHCI reset: device ready after 100ms [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] pcm2: <IDT 92HD81B1X (Analog)> at nid 10 and 17 on hdaa1 [...] pcm2: Playback: [...] pcm2: Stream cap: 0x00000001 PCM [...] pcm2: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz [...] pcm2: DAC: 20 [...] pcm2: [...] pcm2: nid=10 [pin: Line-out (Black Jack)] [...] pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] pcm2: + <- nid=20 [audio output]pass0: [src: pcm] [...] pcm2: [...] pcm2: <HGST HTS725050A7E630 GH2OA440>Record: [...] pcm2: Stream cap: 0x00000001 PCM [...] pcm2: PCM cap: 0x000e05e0 16 20 24 bits, ACS-2 ATA SATA 2.x device [...] 44 48 88 96 192pass0: Serial Number... [...] KHz [...] pcm2: ADC: 22pass0: 300.000MB/s transfers [...] pcm2: [...] pcm2: nid=22 [audio input] (SATA 2.x, UDMA6, PIO 8192bytes) [...] pass0: Command Queueing enabled [...] [...] pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] pcm2: + <- pass1: <hp DVDRAM GT80N R102> Removable CD-ROM SCSI device [...] pass1: Serial Number... [...] pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] nid=24 [audio selector]GEOM: new disk cd0 [...] [src: monitor] [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HTS725050A7E630 GH2OA440> ACS-2 ATA SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] pcm2: + <- nid=17 [pin: Mic (Both)] [src: monitor] [...] pcm2: [...] pcm2: Master Volume (OSS: vol): -95/0dB [...] pcm2: +- ctl 8 (nid 20 out): cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <hp DVDRAM GT80N R102> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] -95/0dB (128 steps) + mute [...] pcm2: [...] pcm2: PCM Volume (OSS: pcm): -95/0dB [...] pcm2: +- ctl 8 (nid 20 out): -95/0dB (128 steps) + mute [...] GEOM: new disk ada0 [...] pcm2: [...] pcm2: Microphone2 Volume (OSS: monitor): 0/30dB [...] pcm2: +- ctl 5 (nid 17 out): 0/30dB (4 steps) [...] pcm2: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute [...] pcm2: [...] pcm2: Recording Level (OSS: rec): 0/22dB [...] pcm2: +- ctl 5 (nid 17 out): 0/30dB (4 steps) [...] pcm2: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute [...] pcm2: [...] pcm2: Mixer "vol": [...] pcm2: Mixer "pcm": [...] pcm2: Mixer "rec": [...] pcm2: Mixer "ogain": [...] pcm2: Mixer "monitor": [...] pcm2: Playback channel set is: Front Left, Front Right, [...] pcm2: Playback channel matrix is: 2.0 (disconnected) [...] pcm2: Automatically set rec source to: monitor [...] pcm2: Recording channel set is: Front Left, Front Right, [...] pcm2: Recording channel matrix is: 2.0 (unknown) [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus2 usbus1 usbus0 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x5434> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x0424 product 0x5434, class 9/0, rev 2.10/30.82, addr 1> on usbus0 [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus2uhub1: usbus13 ports with 3 removable, self powered [...] usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus2 usbus1 usbus0 [...] ugen0.3: <SteelSeries SteelSeries Siberia 350> at usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] ugen0.4: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 2.00/1.30, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 [...] Root mount waiting for:uhub4: usbus2 usbus18 ports with 8 removable, self powered [...] usbus0 [...] ugen1.3: <Chicony Electronics Co., Ltd. HP HD Webcam Fixed> at usbus1 [...] ugen0.5: <Creative Technology Ltd. Creative WebCam Live Motion> at usbus0 [...] ugen2.3: <Broadcom Corp BCM20702A0> at usbus2 [...] ugen1.4: <vendor 0x0424 product 0x2514> at usbus1 [...] uhub6 on uhub5 [...] uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 4> on usbus1 [...] uhub6: MTT enabled [...] uhub6: 2 ports with 2 removable, self powered [...] ugen0.6: <vendor 0x192f USB Optical Mouse> at usbus0 [...] Root mount waiting for: usbus1 usbus0 [...] ugen1.5: <vendor 0x05ac product 0x9131> at usbus1 [...] uhub7 on uhub6 [...] uhub7: <vendor 0x05ac product 0x9131, class 9/0, rev 2.00/1.01, addr 5> on usbus1 [...] uhub7: MTT enabled [...] ugen0.7: <SMSC USB5534> at usbus0 [...] uhub8 on uhub2 [...] uhub8: <SMSC USB5534, class 9/0, rev 3.00/30.82, addr 6> on usbus0 [...] Root mount waiting for: usbus1 usbus0 [...] uhub7: 3 ports with 2 removable, self powered [...] uhub8: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 usbus0 [...] Root mount waiting for: usbus1 usbus0 [...] Root mount waiting for: usbus1 usbus0 [...] ugen1.6: <HP v150w> at usbus1 [...] umass0 on uhub7 [...] umass0: <HP v150w, class 0/0, rev 2.00/1.00, addr 6> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:5:0: Attached to scbus5 [...] GEOM: new disk da0 [...] pass2 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] pass2: <hp v150w PMAP> Removable Direct Access SPC-2 SCSI device [...] pass2: Serial Number... [...] pass2: 40.000MB/s transfers [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <hp v150w PMAP> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14891MB (30497664 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] da0: Delete methods: <NONE(*),ZERO> [...] ugen1.7: <Apple Computer, Inc. Apple Cinema HD Display> at usbus1 [...] ugen0.8: <BUFFALO HD-PCFU3> at usbus0 [...] umass1 on uhub2 [...] umass1: <BUFFALO HD-PCFU3, class 0/0, rev 3.00/1.25, addr 7> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0xc101 [...] umass1:6:1: Attached to scbus6 [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] ugen1.8: <Android Android> at usbus1 [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] GEOM: new disk cd1 [...] Root mount waiting for: usbus1 [...] GEOM: new disk da1 [...] pass4 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] pass4: <BUFFALO HD-PCFU3 0000> Fixed Direct Access SCSI-3 device [...] pass4: 400.000MB/s transfers [...] da1 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] da1: <BUFFALO HD-PCFU3 0000> Fixed Direct Access SCSI-3 device [...] da1: 400.000MB/s transfers [...] da1: 1907729MB (3907029168 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] da1: Delete methods: <NONE(*),ZERO> [...] ugen1.9: <HP HP hs2350 HSPA+ MobileBroadband> at usbus1 [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] efirtc0: providing initial system time [...] start_init: trying /rescue/init [...] arc4random: no preloaded entropy cache [...] cd9660: RockRidge Extension [...] battery1: battery initialization failed, giving up [...] ugen1.8: <Android Android> at usbus1 (disconnected) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.8: <Android Android> at usbus1 [...] ugen1.8: <Android Android> at usbus1 (disconnected) [...] ugen1.8: <Android Android> at usbus1 [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] Trying to mount root from zfs:livecd []... [...] efirtc0: providing initial system time [...] lo0: link state changed to UP [...] em0: Link is up 100 Mbps Full Duplex [...] em0: link state changed to UP [...] uaudio0 on uhub3 [...] uaudio0: <SteelSeries SteelSeries Siberia 350, class 0/0, rev 1.10/2.08, addr 2> on usbus0 [...] uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3: <USB audio> on uaudio0 [...] pcm3: Mixer "vol": [...] pcm3: Mixer "pcm": [...] pcm3: Mixer "mic": [...] pcm3: Soft PCM mixer ENABLED [...] uaudio0: HID volume keys found. [...] uhid0 on uhub7 [...] uhid0: <Apple Computer, Inc. Apple Cinema HD Display, class 0/0, rev 1.10/1.14, addr 7> on usbus1 [...] ubt0 on uhub4 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3> on usbus2 [...] ums0 on uhub2 [...] ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 5> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] cd9660: RockRidge Extension [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] umodem0 on uhub5 [...] umodem0: <HP hs2350 HSPA+ Mobile Broadband Modem> on usbus1 [...] umodem0: data interface 2, has CM over data, has break [...] umodem1 on uhub5 [...] umodem1: <HP hs2350 HSPA+ Mobile Broadband Data Modem> on usbus1 [...] umodem1: data interface 4, has CM over data, has break [...] umodem2 on uhub5 [...] umodem2: <HP hs2350 HSPA+ Mobile Broadband NMEA> on usbus1 [...] umodem2: data interface 10, has CM over data, has break [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cdce0 on uhub5 [...] cdce0: <HP hs2350 HSPA+ MobileBroadband Network Adapter> on usbus1 [...] ue0: <USB Ethernet> on cdce0 [...] ue0: bpf attached [...] ue0: Ethernet address: ... [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] GEOM: new disk cd1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] ugen1.8: <Android Android> at usbus1 (disconnected) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ugen1.8: <Android Android> at usbus1 [...] wlan0: bpf attached [...] wlan0: bpf attached [...] wlan0: Ethernet address: ... [...] wlan0: bpf attached [...] wlan0: bpf attached [...] wlan0: Ethernet address: ... [...] firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8400c000 [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8400c000 [...] iwn0: iwn_read_firmware: ucode rev=0x12a80601 [...] ugen1.8: <Android Android> at usbus1 (disconnected) [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] ugen1.8: <Android Android> at usbus1 [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] Linux ELF exec handler installed [...] Linux x86-64 ELF exec handler installed [...] anon_inodefs registered [...] debugfs registered [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x103C:0x17A9 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: HP/Foxconn [...] drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 8324114 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 1024M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading TURKS Microcode [...] firmware: 'radeon/TURKS_pfp.bin' version 0: 4480 bytes loaded at 0xffffffff84288000 [...] drmn0: successfully loaded firmware image with name: radeon/TURKS_pfp.bin [...] firmware: 'radeon/TURKS_me.bin' version 0: 5504 bytes loaded at 0xffffffff8428a000 [...] drmn0: successfully loaded firmware image with name: radeon/TURKS_me.bin [...] firmware: 'radeon/BTC_rlc.bin' version 0: 3072 bytes loaded at 0xffffffff8428c000 [...] drmn0: successfully loaded firmware image with name: radeon/BTC_rlc.bin [...] firmware: 'radeon/TURKS_mc.bin' version 0: 24096 bytes loaded at 0xffffffff8428d000 [...] drmn0: successfully loaded firmware image with name: radeon/TURKS_mc.bin [...] firmware: 'radeon/TURKS_smc.bin' version 0: 24668 bytes loaded at 0xffffffff84293000 [...] drmn0: successfully loaded firmware image with name: radeon/TURKS_smc.bin [...] [drm] Internal thermal controller with fan control [...] [drm] radeon: dpm initialized [...] firmware: 'radeon/SUMO_uvd.bin' version 0: 205080 bytes loaded at 0xffffffff8429a000 [...] drmn0: successfully loaded firmware image with name: radeon/SUMO_uvd.bin [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff800260c1c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff800260c1c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800c0072118 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] vgapci0: attempting to allocate 1 MSI vectors (1 supported) [...] msi: routing MSI IRQ 272 to local APIC 2 vector 57 [...] vgapci0: using IRQ 272 for MSI [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 3 succeeded in 4 usecs [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, trying to reset the VCPU!!! [...] [drm:uvd_v1_0_start] UVD not responding, giving up!!! [...] drmn0: failed initializing UVD (-1). [...] ugen1.8: <Android Android> at usbus1 (disconnected) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] pcib0: allocated type 4 (0x430-0x437) for rid 0 of ichwd0 [...] pcib0: allocated type 4 (0x460-0x47f) for rid 1 of ichwd0 [...] pcib0: allocated type 3 (0xfed1f410-0xfed1f413) for rid 0 of isab0 [...] ichwd0: timer disabled [...] pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 [...] pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 [...] ppc0: cannot reserve I/O port range [...] pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 [...] firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff842d1000 [...] ugen1.8: <Android Android> at usbus1 [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] [drm:r600_ib_test] radeon: fence wait timed out. [...] [drm:radeon_ib_ring_tests] radeon: failed testing IB on GFX ring (-60). [...] [drm:radeon_device_init] ib ring test failed (-60). [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-3: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-3 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] radeon atom DIG backlight initialized [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] LVDS-1 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] LCD1: INTERNAL_UNIPHY [...] [drm] Connector 1: [...] [drm] DP-1 [...] [drm] HPD1 [...] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY1 [...] [drm] Connector 2: [...] [drm] DP-2 [...] [drm] HPD2 [...] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY1 [...] [drm] Connector 3: [...] [drm] DP-3 [...] [drm] HPD3 [...] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY2 [...] [drm] Connector 4: [...] [drm] VGA-1 [...] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] (cd1:umass-sim2:2:0:0): READ(10). CDB: 28 00 00 00 01 80 00 00 20 00 [...] (cd1:umass-sim2:2:0:0): CAM status: CCB request completed with an error [...] (cd1:umass-sim2:2:0:0): Retrying command, 3 more tries remain [...] (cd1:umass-sim2:2:0:0): READ(10). CDB: 28 00 00 00 01 80 00 00 20 00 [...] (cd1:umass-sim2:2:0:0): CAM status: CCB request completed with an error [...] (cd1:umass-sim2:2:0:0): Retrying command, 2 more tries remain [...] (cd1:umass-sim2:2:0:0): READ(10). CDB: 28 00 00 00 01 80 00 00 20 00 [...] (cd1:umass-sim2:2:0:0): CAM status: CCB request completed with an error [...] (cd1:umass-sim2:2:0:0): Retrying command, 1 more tries remain [...] (cd1:umass-sim2:2:0:0): READ(10). CDB: 28 00 00 00 01 80 00 00 20 00 [...] (cd1:umass-sim2:2:0:0): CAM status: CCB request completed with an error [...] (cd1:umass-sim2:2:0:0): Retrying command, 0 more tries remain [...] (cd1:umass-sim2:2:0:0): READ(10). CDB: 28 00 00 00 01 80 00 00 20 00 [...] (cd1:umass-sim2:2:0:0): CAM status: CCB request completed with an error [...] (cd1:umass-sim2:2:0:0): Error 5, Retries exhausted [...] (cd1:umass-sim2:2:0:0): cddone: got error 0x5 back [...] GEOM: Deconfigure iso9660/ONEPLUS%20DRIVERS [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] [drm] fb mappable at 0xC0363000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 9216000 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=9216000 [...] pbase=0xc0363000 vbase=0xfffff800c0363000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] umass2: at uhub7, port 3, addr 8 (disconnected) [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> detached [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> detached [...] (pass3:umass-sim2:2:0:0): Periph destroyed [...] (cd1:umass-sim2:2:0:0): Periph destroyed [...] umass2: detached [...] umass2 on uhub7 [...] umass2: <Mass Storage> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0000 [...] umass2:7:2: Attached to scbus7 [...] GEOM: new disk cd1 [...] pass3 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] pass3: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] pass3: 40.000MB/s transfers [...] cd1 at umass-sim2 bus 2 scbus7 target 0 lun 0 [...] cd1: <OnePlus Device Driveret 0310> Fixed CD-ROM SCSI-2 device [...] cd1: 40.000MB/s transfers [...] cd1: 10MB (5281 2048 byte sectors) [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] scsi_cd.c::ioctl cmd=8004667e error=25 [...] cd9660: Joliet Extension (Level 3) [...] ACPI: Processor \134_PR_.CPU4 (ACPI ID 4) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU5 (ACPI ID 5) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU6 (ACPI ID 6) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] ACPI: Processor \134_PR_.CPU7 (ACPI ID 7) ignored [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] Table 'FACP' at 0xbeffc000 [...] FACP: Found table at 0xbeffc000 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, detectable by BIOS, head #0 [...] found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0 [...] found TV/HDTV or Analog-Video Monitor(210), idx#0, port#1, detectable by BIOS, head #0 [...] found TV/HDTV or Analog-Video Monitor(220), idx#0, port#2, detectable by BIOS, head #0 [...] found TV/HDTV or Analog-Video Monitor(230), idx#0, port#3, detectable by BIOS, head #0 [...] acpi_video0: unknown notify event 0xd0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type