Probe #b36e9a7b2e of AMI Aptio CRB
Log: dmesg
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 3 1 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000001314 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff80001600800), ignoring.
[...] em3: link state changed to UP
[...] debugnet_any_ifnet_update: Bad dn_init result from em3 (ifp 0xfffff80001696800), ignoring.
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] pflog0: permanently promiscuous mode enabled
[...] em3: link state changed to UP
[...] em0: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pid 95190 (ntopng), jid 0, uid 288: exited on signal 11
[...] em0: promiscuous mode disabled
[...] enc0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 2 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] All buffers synced.
[...] Uptime: 24d1h23m52s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 2 1 3
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000000834 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff80001600800), ignoring.
[...] em3: link state changed to UP
[...] debugnet_any_ifnet_update: Bad dn_init result from em3 (ifp 0xfffff80001696800), ignoring.
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] pflog0: permanently promiscuous mode enabled
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pid 15448 (ntopng), jid 0, uid 288: exited on signal 11
[...] em0: promiscuous mode disabled
[...] enc0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] pid 40475 (sh), jid 0, uid 0: exited on signal 10 (core dumped)
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] All buffers synced.
[...] Uptime: 21d11h8m20s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248063-ac40e064d3c SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 2 3 1
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000000899 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] pflog0: permanently promiscuous mode enabled
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pid 57729 (ntopng), jid 0, uid 288: exited on signal 11
[...] enc0: promiscuous mode disabled
[...] em0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] All buffers synced.
[...] Uptime: 46d12h53m9s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 2 1 3
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000001143 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] pflog0: permanently promiscuous mode enabled
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] em0: promiscuous mode disabled
[...] enc0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 3 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] All buffers synced.
[...] Uptime: 4d1h8m22s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 3 1 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000001023 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] em0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] em3: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pid 91961 (ntopng), jid 0, uid 288: exited on signal 11
[...] em0: promiscuous mode disabled
[...] enc0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em3
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] All buffers synced.
[...] Uptime: 53d13h18m1s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 2 1 3
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000001098 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a10000-0xd0a1001f irq 18 at device 31.3 on pci0
[...] smbus0: <System Management Bus> on ichsmb0
[...] lo0: link state changed to UP
[...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[...] tun1: changing name to 'ovpns1'
[...] em0: link state changed to DOWN
[...] WARNING: attempt to domain_add(netgraph) after domainfinalize()
[...] ng0: changing name to 'pppoe0'
[...] em3: link state changed to DOWN
[...] pflog0: permanently promiscuous mode enabled
[...] em0: link state changed to UP
[...] em3: link state changed to UP
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] em0: promiscuous mode enabled
[...] enc0: promiscuous mode enabled
[...] pppoe0: promiscuous mode enabled
[...] ovpns1: promiscuous mode enabled
[...] em3: promiscuous mode enabled
[...] lo0: promiscuous mode enabled
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pppoe0: can't handle af31
[...] pid 57654 (ntopng), jid 0, uid 288: exited on signal 11
[...] em0: promiscuous mode disabled
[...] enc0: promiscuous mode disabled
[...] pppoe0: promiscuous mode disabled
[...] ovpns1: promiscuous mode disabled
[...] em3: promiscuous mode disabled
[...] lo0: promiscuous mode disabled
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] em3: link state changed to DOWN
[...] em3: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] ovpns1: link state changed to DOWN
[...] ovpns1: link state changed to UP
[...] pid 31436 (sh), jid 0, uid 0: exited on signal 10 (core dumped)
[...] ovpns1: link state changed to DOWN
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 2 0 0 done
[...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
[...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
[...] All buffers synced.
[...] Uptime: 16d19h20m19s
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.0-STABLE stable/22.1-n248088-47fa565344c SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(efifb): resolution 1280x1024
[...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
[...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3987689472 (3802 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748)
[...] ioapic0 <Version 2.0> irqs 0-86
[...] Launching APs: 3 1 2
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] aesni0: No AES or SHA support.
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] cpu0: <ACPI CPU> on acpi0
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 440
[...] Event timer "HPET2" frequency 14318180 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a11000-0xd0a117ff irq 19 at device 19.0 on pci0
[...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff irq 20 at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] xhci0: Port routing mask set to 0xffffffff
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] em0: <Intel(R) 82583V> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
[...] em0: EEPROM V1.10-0
[...] em0: Using 1024 TX descriptors and 1024 RX descriptors
[...] em0: Using an MSI interrupt
[...] em0: Ethernet address: ...
[...] em0: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] em1: <Intel(R) 82583V> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
[...] em1: EEPROM V1.10-0
[...] em1: Using 1024 TX descriptors and 1024 RX descriptors
[...] em1: Using an MSI interrupt
[...] em1: Ethernet address: ...
[...] em1: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] em2: <Intel(R) 82583V> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
[...] em2: EEPROM V1.10-0
[...] em2: Using 1024 TX descriptors and 1024 RX descriptors
[...] em2: Using an MSI interrupt
[...] em2: Ethernet address: ...
[...] em2: netmap queues/slots: TX 1/1024, RX 1/1024
[...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] em3: <Intel(R) 82583V> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
[...] em3: EEPROM V1.10-0
[...] em3: Using 1024 TX descriptors and 1024 RX descriptors
[...] em3: Using an MSI interrupt
[...] em3: Ethernet address: ...
[...] em3: netmap queues/slots: TX 1/1024, RX 1/1024
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_button1: <Sleep Button> on acpi0
[...] uart2: <16550 or compatible> port 0x3e0-0x3e7 irq 4 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 2000001331 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] Root mount waiting for: CAM usbus0
[...] ugen0.1: <0x8086 XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <TS128GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] uhub0: 7 ports with 7 removable, self powered
[...] mountroot: waiting for device /dev/gpt/rootfs...
