[...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6f76e000-0x6f76e017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TP-R2X> [...] acpi_ec0: <Embedded Controller: GPE 0x14, ECDT> port 0x62,0x66 on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc4a00000-0xc4a03fff at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xc4904000-0xc4904fff,0xc4900000-0xc4903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x50000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x5000000000-0x507fffffff,0x80000000-0x8fffffff,0x90200000-0x9027ffff at device 0.0 on pci4 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0x902c8000-0x902cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90000000-0x900fffff at device 0.4 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0x902c0000-0x902c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4300000-0xc43fffff at device 0.0 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc4400000-0xc44fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xc4500000-0xc45fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] Timecounter "TSC" frequency 1996250490 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] uhub0 on usbus2 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub3 on usbus3 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC257 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <SKHynix_HFS001TEJ9X162N 51730A10 AJE7N78201190817O> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 7 ports with 7 removable, self powered [...] ugen0.2: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen1.2: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <Metadot - Das Keyboard Das Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] uhub5: MTT enabled [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <MediaTek Inc. WirelessDevice> at usbus1 [...] ugen1.7: <VIA Labs, Inc. USB3.0 Hub> at usbus1 [...] uhub6 on uhub2 [...] uhub6: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 6> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1m29s [...] uhub3: detached [...] uhub0: detached [...] ukbd0: detached [...] uhub4: detached [...] uhub5: detached [...] uhub6: detached [...] uhub2: detached [...] uhub1: detached [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1200 [...] CPU: AMD Ryzen AI 5 PRO 340 w/ Radeon 840M (1996.32-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xb60f00 Family=0x1a Model=0x60 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x19405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0x10000110<FSRM,AVX512VP2INTERSECT,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 30856036352 (29426 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R2X > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 6 9 8 7 3 11 5 4 2 10 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6f76e000-0x6f76e017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TP-R2X> [...] acpi_ec0: <Embedded Controller: GPE 0x14, ECDT> port 0x62,0x66 on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc4a00000-0xc4a03fff at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xc4904000-0xc4904fff,0xc4900000-0xc4903fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x50000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x5000000000-0x507fffffff,0x80000000-0x8fffffff,0x90200000-0x9027ffff at device 0.0 on pci4 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0x902c8000-0x902cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90000000-0x900fffff at device 0.4 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0x902c0000-0x902c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4300000-0xc43fffff at device 0.0 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc4400000-0xc44fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xc4500000-0xc45fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] Timecounter "TSC" frequency 1996250627 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus3 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus2 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub3 on usbus1 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC257 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <SKHynix_HFS001TEJ9X162N 51730A10 AJE7N78201190817O> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 7 ports with 7 removable, self powered [...] ugen0.2: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen1.2: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <Metadot - Das Keyboard Das Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] uhub5: MTT enabled [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <MediaTek Inc. WirelessDevice> at usbus1 [...] ugen1.7: <VIA Labs, Inc. USB3.0 Hub> at usbus1 [...] uhub6 on uhub3 [...] uhub6: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 6> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0 [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 4 on acpi0 [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ig4iic2: <Designware I2C Controller> iomem 0xfedc4000-0xfedc4fff irq 6 on acpi0 [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQBD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI5.WQBE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI6.WQBF: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi7: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi7: Embedded MOF found [...] ACPI: \134_SB.WMI7.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi8: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi8: Embedded MOF found [...] ACPI: \134_SB.WMI8.WQCE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ubt0 on uhub5 [...] ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1 on uhub5 [...] ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1: ubt_attach:680: could not get two interfaces [...] device_attach: ubt1 attach returned 6 [...] iichid0: <SYNA8022:00 06CB:CE67 I2C HID device> at addr 0x2c on iicbus1 [...] iichid0: Using sampling mode [...] hidbus0: <HID bus> on iichid0 [...] ng_hci_process_command_complete: ubt0hci - HCI command failed, OGF=0x3, OCF=0x3, status=0xc [...] hms0: <SYNA8022:00 06CB:CE67 Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=2 [...] hmt0: <SYNA8022:00 06CB:CE67 TouchPad> on hidbus0 [...] hconf0: <SYNA8022:00 06CB:CE67 Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1343:682] [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] CPU: AMD Ryzen AI 5 PRO 340 w/ Radeon 840M (1996.25-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xb60f00 Family=0x1a Model=0x60 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x19405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0x10000110<FSRM,AVX512VP2INTERSECT,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] interface mwl.1 already present in the KLD 'kernel'! [...] module_register: cannot register pci/ral from if_ral.ko; already loaded from kernel [...] Module pci/ral failed to register: 17 [...] module_register: cannot register pci/ral from if_ral.ko; already loaded from kernel [...] Module pci/ral failed to register: 17 [...] gpio0: <AMD GPIO Controller> iomem 0xfed81500-0xfed818ff irq 7 on acpi0 [...] gpiobus0: <GPIO bus (ACPI-hinted)> on gpio0 [...] gpioc0: <GPIO controller> on gpio0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 32m23s [...] uhub0: detached [...] uhub1: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub4: detached [...] ubt0: detached [...] uhub5: detached [...] uhub6: detached [...] uhub3: detached [...] uhub2: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1200 [...] module mwl already present! [...] module_register: cannot register pci/ral from kernel; already loaded from if_ral.ko [...] Module pci/ral failed to register: 17 [...] CPU: AMD Ryzen AI 5 PRO 340 w/ Radeon 840M (1996.33-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xb60f00 Family=0x1a Model=0x60 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x19405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0x10000110<FSRM,AVX512VP2INTERSECT,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 30854070272 (29424 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R2X > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 9 8 7 6 3 5 11 4 2 10 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6f76e000-0x6f76e017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TP-R2X> [...] acpi_ec0: <Embedded Controller: GPE 0x14, ECDT> port 0x62,0x66 on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc4a00000-0xc4a03fff at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0x2000-0x20ff mem 0xc4904000-0xc4904fff,0xc4900000-0xc4903fff at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] re0: DASH status: disabled [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x5000000000-0x507fffffff,0x80000000-0x8fffffff,0x90200000-0x9027ffff at device 0.0 on pci4 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0x902c8000-0x902cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90000000-0x900fffff at device 0.4 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0x902c0000-0x902c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4300000-0xc43fffff at device 0.0 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc4400000-0xc44fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xc4500000-0xc45fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] gpio0: <AMD GPIO Controller> iomem 0xfed81500-0xfed818ff irq 7 on acpi0 [...] gpiobus0: <GPIO bus (ACPI-hinted)> on gpio0 [...] gpioc0: <GPIO controller> on gpio0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] Timecounter "TSC" frequency 1996250208 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus3 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub3 on usbus0 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC257 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <SKHynix_HFS001TEJ9X162N 51730A10 AJE7N78201190817O> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 7 ports with 7 removable, self powered [...] ugen0.2: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen1.2: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <Metadot - Das Keyboard Das Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] uhub5: MTT enabled [...] uhub5: 2 ports with 2 removable, self powered [...] ugen1.6: <MediaTek Inc. WirelessDevice> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.7: <VIA Labs, Inc. USB3.0 Hub> at usbus1 [...] uhub6 on uhub1 [...] uhub6: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 6> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0 [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 4 on acpi0 [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ig4iic2: <Designware I2C Controller> iomem 0xfedc4000-0xfedc4fff irq 6 on acpi0 [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQBD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI5.WQBE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI6.WQBF: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi7: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi7: Embedded MOF found [...] ACPI: \134_SB.WMI7.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi8: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi8: Embedded MOF found [...] ACPI: \134_SB.WMI8.WQCE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ubt0 on uhub5 [...] ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1 on uhub5 [...] ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1: ubt_attach:680: could not get two interfaces [...] device_attach: ubt1 attach returned 6 [...] iichid0: <SYNA8022:00 06CB:CE67 I2C HID device> at addr 0x2c on iicbus1 [...] iichid0: Using sampling mode [...] hidbus0: <HID bus> on iichid0 [...] ng_hci_process_command_complete: ubt0hci - HCI command failed, OGF=0x3, OCF=0x3, status=0xc [...] hms0: <SYNA8022:00 06CB:CE67 Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=2 [...] hmt0: <SYNA8022:00 06CB:CE67 TouchPad> on hidbus0 [...] hconf0: <SYNA8022:00 06CB:CE67 Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1343:682] [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] acpi_video0: <ACPI video extension> on vgapci0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6m51s [...] uhub0: detached [...] uhub2: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub4: detached [...] ubt0: detached [...] uhub5: detached [...] uhub6: detached [...] uhub1: detached [...] uhub3: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1200 [...] module_register: cannot register pci/ral from kernel; already loaded from if_ral.ko [...] Module pci/ral failed to register: 17 [...] CPU: AMD Ryzen AI 5 PRO 340 w/ Radeon 840M (1996.30-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xb60f00 Family=0x1a Model=0x60 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x19405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0x10000110<FSRM,AVX512VP2INTERSECT,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 30853943296 (29424 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R2X > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 8 9 6 7 3 11 5 2 10 4 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6f76e000-0x6f76e017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TP-R2X> [...] acpi_ec0: <Embedded Controller: GPE 0x14, ECDT> port 0x62,0x66 on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc4a00000-0xc4a03fff at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0x2000-0x20ff mem 0xc4904000-0xc4904fff,0xc4900000-0xc4903fff at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] re0: DASH status: disabled [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x5000000000-0x507fffffff,0x80000000-0x8fffffff,0x90200000-0x9027ffff at device 0.0 on pci4 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0x902c8000-0x902cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90000000-0x900fffff at device 0.4 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0x902c0000-0x902c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4300000-0xc43fffff at device 0.0 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc4400000-0xc44fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xc4500000-0xc45fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] gpio0: <AMD GPIO Controller> iomem 0xfed81500-0xfed818ff irq 7 on acpi0 [...] gpiobus0: <GPIO bus (ACPI-hinted)> on gpio0 [...] gpioc0: <GPIO controller> on gpio0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQBD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI5.WQBE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI6.WQBF: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi7: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi7: Embedded MOF found [...] ACPI: \134_SB.WMI7.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi8: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi8: Embedded MOF found [...] ACPI: \134_SB.WMI8.WQCE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] Timecounter "TSC" frequency 1996250829 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus3 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC257 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <SKHynix_HFS001TEJ9X162N 51730A10 AJE7N78201190817O> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 7 ports with 7 removable, self powered [...] ugen0.2: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen1.2: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <Metadot - Das Keyboard Das Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] uhub5: MTT enabled [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <MediaTek Inc. WirelessDevice> at usbus1 [...] ugen1.7: <VIA Labs, Inc. USB3.0 Hub> at usbus1 [...] uhub6 on uhub2 [...] uhub6: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 6> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0 [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 4 on acpi0 [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ig4iic2: <Designware I2C Controller> iomem 0xfedc4000-0xfedc4fff irq 6 on acpi0 [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ubt0 on uhub5 [...] ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1 on uhub5 [...] ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1: ubt_attach:680: could not get two interfaces [...] device_attach: ubt1 attach returned 6 [...] iichid0: <SYNA8022:00 06CB:CE67 I2C HID device> at addr 0x2c on iicbus1 [...] iichid0: Using sampling mode [...] hidbus0: <HID bus> on iichid0 [...] ng_hci_process_command_complete: ubt0hci - HCI command failed, OGF=0x3, OCF=0x3, status=0xc [...] hms0: <SYNA8022:00 06CB:CE67 Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=2 [...] hmt0: <SYNA8022:00 06CB:CE67 TouchPad> on hidbus0 [...] hconf0: <SYNA8022:00 06CB:CE67 Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1343:682] [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6m58s [...] uhub3: detached [...] uhub1: detached [...] ukbd0: detached [...] uhid0: detached [...] uhub4: detached [...] ubt0: detached [...] uhub5: detached [...] uhub6: detached [...] uhub2: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1200 [...] module_register: cannot register pci/ral from kernel; already loaded from if_ral.ko [...] Module pci/ral failed to register: 17 [...] CPU: AMD Ryzen AI 5 PRO 340 w/ Radeon 840M (1996.30-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xb60f00 Family=0x1a Model=0x60 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0xf1bf97ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x19405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0x10000110<FSRM,AVX512VP2INTERSECT,L1DFL> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 30853935104 (29424 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R2X > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 8 9 7 6 5 3 11 4 10 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6f76e000-0x6f76e017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TP-R2X> [...] acpi_ec0: <Embedded Controller: GPE 0x14, ECDT> port 0x62,0x66 on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] isab0: <ACPI Generic ISA bridge> on acpi0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc4a00000-0xc4a03fff at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 2.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib4 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib5: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] re0: <Realtek PCIe GbE Family Controller> port 0x2000-0x20ff mem 0xc4904000-0xc4904fff,0xc4900000-0xc4903fff at device 0.0 on pci3 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] re0: DASH status: disabled [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x5000000000-0x507fffffff,0x80000000-0x8fffffff,0x90200000-0x9027ffff at device 0.0 on pci4 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] hdac0: <ATI (0x1640) HDA Controller> mem 0x902c8000-0x902cbfff at device 0.1 on pci4 [...] pci4: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x90000000-0x900fffff at device 0.4 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci4: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0x902c0000-0x902c7fff at device 0.6 on pci4 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 8.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4300000-0xc43fffff at device 0.0 on pci6 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc4400000-0xc44fffff at device 0.3 on pci6 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] xhci3: <XHCI (generic) USB 3.0 controller> mem 0xc4500000-0xc45fffff at device 0.4 on pci6 [...] xhci3: 64 bytes context size, 64-bit DMA [...] usbus3 on xhci3 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] pci6: <serial bus, USB> at device 0.5 (no driver attached) [...] pci6: <serial bus, USB> at device 0.6 (no driver attached) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] gpio0: <AMD GPIO Controller> iomem 0xfed81500-0xfed818ff irq 7 on acpi0 [...] gpiobus0: <GPIO bus (ACPI-hinted)> on gpio0 [...] gpioc0: <GPIO controller> on gpio0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQBD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI5.WQBE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI6.WQBF: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi7: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi7: Embedded MOF found [...] ACPI: \134_SB.WMI7.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi8: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi8: Embedded MOF found [...] ACPI: \134_SB.WMI8.WQCE: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] Timecounter "TSC" frequency 1996250939 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen3.1: <AMD XHCI root HUB> at usbus3 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus3 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub3 on usbus1 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC257 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 25 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <SKHynix_HFS001TEJ9X162N 51730A10 AJE7N78201190817O> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 7 ports with 7 removable, self powered [...] ugen0.2: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen1.2: <VIA Labs, Inc. USB2.0 Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] ugen1.3: <Metadot - Das Keyboard Das Keyboard> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 [...] uhub5: MTT enabled [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <MediaTek Inc. WirelessDevice> at usbus1 [...] ugen1.7: <VIA Labs, Inc. USB3.0 Hub> at usbus1 [...] uhub6 on uhub3 [...] uhub6: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 6> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] isab1: <PCI-ISA bridge> at device 20.3 on pci0 [...] device_attach: isab1 attach returned 6 [...] ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0 [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 4 on acpi0 [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x2c [...] ig4iic2: <Designware I2C Controller> iomem 0xfedc4000-0xfedc4fff irq 6 on acpi0 [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Metadot - Das Keyboard Das Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ubt0 on uhub5 [...] ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1 on uhub5 [...] ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 5> on usbus1 [...] ubt1: ubt_attach:680: could not get two interfaces [...] device_attach: ubt1 attach returned 6 [...] iichid0: <SYNA8022:00 06CB:CE67 I2C HID device> at addr 0x2c on iicbus1 [...] iichid0: Using sampling mode [...] hidbus0: <HID bus> on iichid0 [...] ng_hci_process_command_complete: ubt0hci - HCI command failed, OGF=0x3, OCF=0x3, status=0xc [...] hms0: <SYNA8022:00 06CB:CE67 Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=2 [...] hmt0: <SYNA8022:00 06CB:CE67 TouchPad> on hidbus0 [...] hconf0: <SYNA8022:00 06CB:CE67 Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [1343:682]