[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248088-47fa565344c SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) Gold 6234 CPU @ 3.30GHz (3300.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50657 Family=0x6 Model=0x55 Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL> [...] Structured Extended Features2=0x808<PKU,AVX512VNNI> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 68719476736 (65536 MB) [...] avail memory = 66441986048 (63364 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <Cisco0 CiscoUCS> [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-31 [...] ioapic2 <Version 2.0> irqs 32-39 [...] ioapic3 <Version 2.0> irqs 40-47 [...] ioapic4 <Version 2.0> irqs 48-55 [...] Launching APs: 1 6 5 9 13 11 12 4 3 10 8 7 2 15 14 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <Cisco0 CiscoUCS> [...] acpi0: Power Button (fixed) [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 350 [...] Event timer "HPET1" frequency 24000000 Hz quality 340 [...] Event timer "HPET2" frequency 24000000 Hz quality 340 [...] Event timer "HPET3" frequency 24000000 Hz quality 340 [...] Event timer "HPET4" frequency 24000000 Hz quality 340 [...] Event timer "HPET5" frequency 24000000 Hz quality 340 [...] Event timer "HPET6" frequency 24000000 Hz quality 340 [...] Event timer "HPET7" frequency 24000000 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pci0: <dasp, performance counters> at device 8.1 (no driver attached) [...] pci0: <unknown> at device 17.0 (no driver attached) [...] pci0: <unknown> at device 17.1 (no driver attached) [...] ahci0: <Intel Lewisburg AHCI SATA controller> port 0x3070-0x3077,0x3060-0x3063,0x3020-0x303f mem 0xaa006000-0xaa007fff,0xaa009000-0xaa0090ff,0xa9f80000-0xa9ffffff at device 17.5 numa-domain 0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x33ffff00000-0x33ffff0ffff at device 20.0 numa-domain 0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci1: <Intel Lewisburg (RAID) AHCI SATA controller> port 0x3050-0x3057,0x3040-0x3043,0x3000-0x301f mem 0xaa004000-0xaa005fff,0xaa008000-0xaa0080ff,0xa9f00000-0xa9f7ffff at device 23.0 numa-domain 0 on pci0 [...] ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] ahcich8: <AHCI channel> at channel 2 on ahci1 [...] ahcich9: <AHCI channel> at channel 3 on ahci1 [...] ahcich10: <AHCI channel> at channel 4 on ahci1 [...] ahcich11: <AHCI channel> at channel 5 on ahci1 [...] ahcich12: <AHCI channel> at channel 6 on ahci1 [...] ahcich13: <AHCI channel> at channel 7 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] ix0: <Intel(R) X550-T2> mem 0xaa800000-0xaabfffff,0xaac04000-0xaac07fff at device 0.0 numa-domain 0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix0: Option ROM V0-b386-p50 eTrack 0x80001516 PHY FW V523 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X550-T2> mem 0xaa400000-0xaa7fffff,0xaac00000-0xaac03fff at device 0.1 numa-domain 0 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 8.0GT/s Width x4 [...] ix1: Option ROM V0-b386-p50 eTrack 0x80001516 PHY FW V523 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> mem 0xa9900000-0xa9900fff at device 0.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] vgapci0: <VGA-compatible display> mem 0xa8000000-0xa8ffffff,0xa9810000-0xa9813fff,0xa9000000-0xa97fffff at device 0.0 numa-domain 0 on pci3 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] pcib4: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mrsas0: <AVAGO Harpoon SAS Controller> port 0x7000-0x70ff mem 0xc5c00000-0xc5cfffff,0xc5b00000-0xc5bfffff,0xc5a00000-0xc5afffff at device 0.0 numa-domain 0 on pci5 [...] mrsas0: FW now in Ready state [...] mrsas0: Using MSI-X with 16 number of vectors [...] mrsas0: FW supports <128> MSIX vector,Online CPU 16 Current MSIX <16> [...] mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1fe0,sc->request_alloc_sz 0x7f60, sc->reply_alloc_sz 0xff00,sc->io_frames_alloc_sz 0xfee00 [...] mrsas0: max sge: 0x106, max chain frame size: 0x1000, max fw cmd: 0xfec sc->chain_frames_alloc_sz: 0xfec000 [...] mrsas0: Issuing IOC INIT command to FW. [...] mrsas0: IOC INIT response received from FW. [...] mrsas0: NVME page size : (4096) [...] mrsas0: FW supports SED [...] mrsas0: FW supports JBOD Map [...] mrsas0: FW supports JBOD Map Ext [...] mrsas0: Jbod map is supported [...] mrsas0: System PD created target ID: 0x40 [...] mrsas0: System PD created target ID: 0x86 [...] mrsas0: VD created target ID: 0x0 [...] mrsas0: max_fw_cmds: 4076 max_scsi_cmds: 4060 [...] mrsas0: MSI-x interrupts setup success [...] mrsas0: mrsas_ocr_thread [...] pcib6: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci4 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x6020-0x603f mem 0xc5400000-0xc54fffff,0xc5904000-0xc5907fff at device 0.0 numa-domain 0 on pci6 [...] WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 8 RX queues 8 TX queues [...] ix2: Using MSI-X interrupts with 9 vectors [...] ix2: allocated for 8 queues [...] ix2: allocated for 8 rx queues [...] ix2: Ethernet address: ... [...] WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. [...] WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules. [...] ix2: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix2: Option ROM V0-b386-p50 eTrack 0x800008a4 PHY FW V65535 [...] ix2: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x6000-0x601f mem 0xc5300000-0xc53fffff,0xc5900000-0xc5903fff at device 0.1 numa-domain 0 on pci6 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 8 RX queues 8 TX queues [...] ix3: Using MSI-X interrupts with 9 vectors [...] ix3: allocated for 8 queues [...] ix3: allocated for 8 rx queues [...] ix3: Ethernet address: ... [...] ix3: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix3: Option ROM V0-b386-p50 eTrack 0x800008a4 PHY FW V65535 [...] ix3: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pci8: <dasp, performance counters> at device 14.0 (no driver attached) [...] pci8: <dasp, performance counters> at device 15.0 (no driver attached) [...] pci8: <dasp, performance counters> at device 16.0 (no driver attached) [...] pci8: <dasp, performance counters> at device 18.0 (no driver attached) [...] pci8: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 18.4 (no driver attached) [...] pci8: <dasp, performance counters> at device 18.5 (no driver attached) [...] pci8: <dasp, performance counters> at device 21.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 22.1 (no driver attached) [...] pci8: <dasp, performance counters> at device 22.5 (no driver attached) [...] pci8: <dasp, performance counters> at device 23.1 (no driver attached) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> numa-domain 0 on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> numa-domain 0 on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> numa-domain 0 on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> numa-domain 0 on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> numa-domain 0 on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> numa-domain 0 on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> numa-domain 0 on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> numa-domain 0 on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> numa-domain 0 on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> numa-domain 0 on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> numa-domain 0 on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> numa-domain 0 on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> numa-domain 0 on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> numa-domain 0 on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> numa-domain 0 on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> numa-domain 0 on cpu15 [...] Timecounter "TSC-low" frequency 1650001433 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] mrsas0: Disestablish mrsas intr hook [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses2 at mrsas0 bus 1 scbus13 target 64 lun 0 [...] ses2: <Cisco UCS-C240-M5 0b14> Fixed Enclosure Services SPC-3 SCSI device [...] ses2: 150.000MB/s transfers [...] ses2: SES Device [...] ses3 at mrsas0 bus 1 scbus13 target 134 lun 0 [...] ses3: <LSI virtualSES 02> Fixed Enclosure Services SPC-4 SCSI device [...] ses3: Serial Number... [...] ses3: 150.000MB/s transfers [...] ses3: SES Device [...] da0 at mrsas0 bus 0 scbus12 target 0 lun 0 [...] da0: <Cisco UCSC-RAID12GP-4G 5.10> Fixed Direct Access SPC-3 SCSI device [...] da0: Serial Number... [...] da0: 150.000MB/s transfers [...] da0: 2858160MB (5853511680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <Cisco Systems, Inc. Emulex Pilot4 HighSpeed Hub> at usbus0 [...] uhub1 numa-domain 0 on uhub0 [...] uhub1: <High Speed Hub> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 7 ports with 7 removable, self powered [...] usbd_set_config_index: could not read device status: USB_ERR_STALLED [...] ugen0.3: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub1 [...] ukbd0: <Keyboard> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 3> on usbus0 [...] uhub2: 4 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <Cypress RAID> at usbus0 [...] umass0 numa-domain 0 on uhub0 [...] umass0: <Cypress RAID, class 0/0, rev 3.00/0.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:14:0: Attached to scbus14 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] da1 at umass-sim0 bus 0 scbus14 target 0 lun 0 [...] da1: <CiscoVD Hypervisor > Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 60901MB (124727295 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE>