[...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1356044621 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] ums0 on uhub2 [...] ums0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em2: link state changed to DOWN [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to UP [...] em2: link state changed to UP [...] em1: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 13m35s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1356049018 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] ums0 on uhub2 [...] ums0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 3m53s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1356060006 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] ums0 on uhub2 [...] ums0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] pid 98986 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 33652 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 65998 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 69177 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 66547 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (66547)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 66547 ppid: 92479 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (92479)] Preventing execution due to repeated segfaults. [...] -> pid: 92479 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 19m34s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1356045156 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] ums0 on uhub2 [...] ums0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 40m3s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1356045085 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 3> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] ums0 on uhub2 [...] ums0: <MOSART Semi. 2.4G INPUT DEVICE, class 0/0, rev 1.10/1.17, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em2: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] wg0: link state changed to DOWN [...] em1: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] em1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] ugen0.3: <MOSART Semi. 2.4G INPUT DEVICE> at usbus0 (disconnected) [...] ukbd0: at uhub2, port 3, addr 2 (disconnected) [...] ukbd0: detached [...] ums0: at uhub2, port 3, addr 2 (disconnected) [...] ums0: detached [...] em2: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] vlan0: changing name to 'em1_vlan7' [...] em1: link state changed to DOWN [...] em1_vlan7: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] em1: link state changed to UP [...] em1_vlan7: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] vlan1: changing name to 'em2_vlan7' [...] em2: link state changed to DOWN [...] em2_vlan7: link state changed to DOWN [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to UP [...] em2_vlan7: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: DAD detected duplicate IPv6 address fe80:XXXX::XXX:XXX:XXX:XXX: NS in/out/loopback=0/1/0, NA in=1 [...] em2: DAD complete for fe80:XXXX::XXX:XXX:XXX:XXX - duplicate found [...] em2: manual intervention required [...] em1: DAD detected duplicate IPv6 address fe80:XXXX::XXX:XXX:XXX:XXX: NS in/out/loopback=0/1/0, NA in=1 [...] em1: DAD complete for fe80:XXXX::XXX:XXX:XXX:XXX - duplicate found [...] em1: manual intervention required [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif em2, outif em1 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to DOWN [...] em1_vlan7: link state changed to DOWN [...] em1: link state changed to UP [...] em1_vlan7: link state changed to UP [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to DOWN [...] em2_vlan7: link state changed to DOWN [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] em2: link state changed to UP [...] em2_vlan7: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em2 [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em1 [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] nd6_na_input: duplicate IP6 address fe80:XXXX::XXX:XXX:XXX:XXX [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 6d1h51m31s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2712.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7909666816 (7543 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1356065948 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xdf4a0000-0xdf4bffff,0xdf480000-0xdf49ffff irq 16 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xdf440000-0xdf45ffff,0xdf420000-0xdf43ffff irq 17 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf520000-0xdf52ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf534000-0xdf535fff,0xdf537000-0xdf5370ff,0xdf536000-0xdf5367ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf300000-0xdf307fff irq 17 at device 0.0 on pci3 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 1.0 on pci5 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> irq 18 at device 4.0 on pci5 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 19 at device 5.0 on pci5 [...] pci8: <PCI bus> on pcib8 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf100000-0xdf1001ff irq 19 at device 0.0 on pci8 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich6: <AHCI channel> at channel 0 on ahci1 [...] ahcich7: <AHCI channel> at channel 1 on ahci1 [...] pcib9: <PCI-PCI bridge> irq 16 at device 6.0 on pci5 [...] pci9: <PCI bus> on pcib9 [...] ahci2: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xdf000000-0xdf0001ff irq 16 at device 0.0 on pci9 [...] ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci2: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich8: <AHCI channel> at channel 0 on ahci2 [...] ahcich9: <AHCI channel> at channel 1 on ahci2 [...] pcib10: <PCI-PCI bridge> irq 17 at device 7.0 on pci5 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] nvme0: <Generic NVMe Device> mem 0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2ffff10000-0x2ffff13fff,0x2ffff00000-0x2ffff0ffff irq 16 at device 31.3 on pci0 [...] em2: <Intel(R) I219-V SPT-H(2)> mem 0xdf500000-0xdf51ffff irq 16 at device 31.6 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1b21 XHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 26 ports with 26 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <ASRock ASM107x> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <ASRock ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <ASRock ASM107x> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <ASRock ASM107x, class 9/0, rev 3.00/1.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em1: link state changed to DOWN [...] vlan0: changing name to 'em1_vlan7' [...] em2: link state changed to DOWN [...] vlan1: changing name to 'em2_vlan7' [...] em1: link state changed to UP [...] em1_vlan7: link state changed to UP [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em1_vlan7: link state changed to DOWN [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em1_vlan7: link state changed to UP [...] em2: link state changed to UP [...] em2_vlan7: link state changed to UP [...] em2: link state changed to DOWN [...] em2_vlan7: link state changed to DOWN [...] em2: link state changed to UP [...] em2_vlan7: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize()