[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 1920x1080 [...] CPU microcode: updated from 0x3c to 0x49 [...] CPU: Intel(R) Xeon(R) CPU E5-2683 v3 @ 2.00GHz (1999.50-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 240510828544 (229369 MB) [...] avail memory = 234111332352 (223265 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 28 CPUs [...] FreeBSD/SMP: 1 package(s) x 14 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 22 2 23 10 7 20 6 24 12 13 16 15 3 26 25 27 18 4 17 14 8 5 11 9 19 21 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5ce0ff18-0x5ce0ff36 [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.5 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] acpi_syscontainer2: <System Container> on acpi0 [...] acpi_syscontainer3: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xf8200000-0xf8203fff at device 0.0 numa-domain 0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf7000000-0xf7ffffff,0x13ff0000000-0x13ff7ffffff,0x13ff8000000-0x13ff9ffffff at device 0.0 numa-domain 0 on pci3 [...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf8080000-0xf8083fff at device 0.1 numa-domain 0 on pci3 [...] pci1: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf040-0xf05f mem 0xf6123000-0xf61237ff at device 17.4 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x13ffff00000-0x13ffff0ffff at device 20.0 numa-domain 0 on pci1 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) I218-V (2)> port 0xf020-0xf03f mem 0xf6100000-0xf611ffff,0xf6121000-0xf6121fff at device 25.0 numa-domain 0 on pci1 [...] em0: EEPROM V0.1-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci1 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xe0180000-0xe01fffff,0xe020c000-0xe020ffff at device 0.0 numa-domain 0 on pci5 [...] igb0: EEPROM V3.29-0 eTrack 0x8000027a [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xe0100000-0xe017ffff,0xe0208000-0xe020bfff at device 0.1 numa-domain 0 on pci5 [...] igb1: EEPROM V3.29-0 eTrack 0x8000027a [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xe0080000-0xe00fffff,0xe0204000-0xe0207fff at device 0.2 numa-domain 0 on pci5 [...] igb2: EEPROM V3.29-0 eTrack 0x8000027a [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xe0000000-0xe007ffff,0xe0200000-0xe0203fff at device 0.3 numa-domain 0 on pci5 [...] igb3: EEPROM V3.29-0 eTrack 0x8000027a [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf000-0xf01f mem 0xf6120000-0xf61207ff at device 31.2 numa-domain 0 on pci1 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1999419997 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] nda0 at nvme0 bus 0 scbus7 target 0 lun 1 [...] nda0: <CX2-8B512-Q11 NVMe LITEON 512GB 48911QD TW02345GLOH006BN03R6> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 1TB RVT04B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1907729MB (3907029168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ahcich4 bus 0 scbus3 target 0 lun 0 [...] ada2: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] ada3 at ahcich5 bus 0 scbus4 target 0 lun 0 [...] ada3: <Samsung SSD 860 EVO 1TB RVT04B6Q> ACS-4 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 953869MB (1953525168 512 byte sectors) [...] ada3: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada4 at ahcich6 bus 0 scbus5 target 0 lun 0 [...] ada4: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device [...] ada4: Serial Number... [...] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada4: Command Queueing enabled [...] ada4: 1907729MB (3907029168 512 byte sectors) [...] ada4: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus6 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses1: ada2,pass3 in 'Slot 00', SATA Slot: scbus3 target 0 [...] ses0: ada1,pass1 in 'Slot 02', SATA Slot: scbus1 target 0 [...] ses1: ada3,pass4 in 'Slot 01', SATA Slot: scbus4 target 0 [...] ses1: ada4,pass5 in 'Slot 02', SATA Slot: scbus5 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 21 ports with 21 removable, self powered [...] ichsmb0: <Intel Wellsburg SMBus controller> port 0x580-0x59f mem 0x13ffff11000-0x13ffff110ff at device 31.3 numa-domain 0 on pci1 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] CPU: Intel(R) Xeon(R) CPU E5-2683 v3 @ 2.00GHz (1999.42-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] bridge1: Ethernet address: ... [...] em0: link state changed to UP [...] lo1: changing name to 'bastille0' [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] igb3: link state changed to UP