[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 8154136576 (7776 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] [1] ioapic0 <Version 2.0> irqs 0-86 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] vtvga0: <VT VGA driver> [...] [1] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.7 [...] [1] aesni0: No AES or SHA support. [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] unknown: I/O range not supported [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 450 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xc8000000-0xc83fffff,0xc0000000-0xc7ffffff irq 16 at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xc8906000-0xc89067ff irq 19 at device 19.0 on pci0 [...] [1] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] [1] hdac0: <Intel BayTrail HDA Controller> mem 0xc8900000-0xc8903fff irq 22 at device 27.0 on pci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] ath0: <Atheros AR938x> mem 0xc8800000-0xc881ffff irq 16 at device 0.0 on pci1 [...] [1] ar9300_flash_map: unimplemented for now [...] [1] Restoring Cal data from DRAM [...] [1] Restoring Cal data from EEPROM [...] [1] Restoring Cal data from Flash [...] [1] Restoring Cal data from Flash [...] [1] Restoring Cal data from OTP [...] [1] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] [1] ath0: [HT] enabling HT modes [...] [1] ath0: [HT] enabling short-GI in 20MHz mode [...] [1] ath0: [HT] 1 stream STBC receive enabled [...] [1] ath0: [HT] 1 stream STBC transmit enabled [...] [1] ath0: [HT] LDPC transmit/receive enabled [...] [1] ath0: [HT] 2 RX streams; 2 TX streams [...] [1] ath0: AR9380 mac 448.3 RF5110 phy 1388.12 [...] [1] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xc8704000-0xc8704fff,0xc8700000-0xc8703fff irq 18 at device 0.0 on pci3 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: ASPM disabled [...] [1] re0: Chip rev. 0x2c800000 [...] [1] re0: MAC rev. 0x00100000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xc8604000-0xc8604fff,0xc8600000-0xc8603fff irq 19 at device 0.0 on pci4 [...] [1] re1: Using 1 MSI-X message [...] [1] re1: ASPM disabled [...] [1] re1: Chip rev. 0x2c800000 [...] [1] re1: MAC rev. 0x00100000 [...] [1] miibus1: <MII bus> on re1 [...] [1] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] [1] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xc8905000-0xc89053ff irq 23 at device 29.0 on pci0 [...] [1] usbus0: EHCI version 1.0 [...] [1] usbus0 on ehci0 [...] [1] usbus0: 480Mbps High Speed USB v2.0 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1999999321 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] [1] ZFS filesystem version: 5 [...] [1] ZFS storage pool version: features support (5000) [...] [1] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] [1] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] [1] pcm0: <Realtek ALC662 rev3 (Analog)> at nid 20 and 25 on hdaa0 [...] [1] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] [1] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] [1] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] [1] Trying to mount root from zfs:zroot/ROOT/default []... [...] [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Vi550 S3 HP3418C5> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 4096bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] [1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <LITEONIT LMT-128M6M mSATA 128GB DM7110F> ATA8-ACS SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 122104MB (250069680 512 byte sectors) [...] [1] GEOM: ada0: the secondary GPT header is not in the last LBA. [...] [2] Root mount waiting for: usbus0 [...] [3] Root mount waiting for: usbus0 [...] [4] Root mount waiting for: usbus0 [...] [4] uhub0: 8 ports with 8 removable, self powered [...] [5] ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0 [...] [5] uhub1 on uhub0 [...] [5] uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0 [...] [5] uhub1: 4 ports with 4 removable, self powered [...] [6] Root mount waiting for: usbus0 [...] [6] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [6] uhub2 on uhub1 [...] [6] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 3> on usbus0 [...] [6] uhub2: 4 ports with 4 removable, self powered