[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x2> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc980000-0xfc99ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <network> at device 0.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc707fff at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xfc600000-0xfc61ffff,0xfc620000-0xfc623fff at device 0.0 on pci9 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> at device 9.0 on pci3 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0x7e00000000-0x7effffffff,0x7f00000000-0x7f001fffff,0xfce00000-0xfce3ffff at device 0.0 on pci11 [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfce60000-0xfce63fff at device 0.1 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pci12: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci12 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfcd08000-0xfcd08fff at device 0.2 on pci13 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] hdac1: <AMD X370 HDA Controller> mem 0xfcd00000-0xfcd07fff at device 0.3 on pci13 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1999999080 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvd0: <Samsung SSD 970 EVO Plus 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC1220 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM035-1RK172 LCM2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM048-2E7172 SDM1> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen2.2: <Dell Dell USB Entry Keyboard> at usbus2 [...] ukbd0 on uhub2 [...] ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] uhub0: 22 ports with 22 removable, self powered [...] ugen2.3: <Cooler Master Technology Inc. MM711 Gaming Mouse> at usbus2 [...] ukbd1 on uhub2 [...] ukbd1: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] ugen1.2: <SanDisk Cruzer Glide> at usbus1 [...] umass0 on uhub1 [...] umass0: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.27, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:9:0: Attached to scbus9 [...] da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] da0: <SanDisk Cruzer Glide 1.27> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14803MB (30316544 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.4: <vendor 0x8087 product 0x0029> at usbus0 [...] CPU: AMD Ryzen 7 2700 Eight-Core Processor (4000.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F9 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xFCE00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: xxx-xxx-xxx [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: could not load firmware image 'amdgpu/polaris10_mc.bin' [...] amdgpu: mc: Failed to load firmware "amdgpu/polaris10_mc.bin" [...] [drm ERROR :gmc_v8_0_sw_init] Failed to load mc firmware! [...] [drm ERROR :amdgpu_device_ip_init] sw_init of IP block <gmc_v8_0> failed -2 [...] drmn0: amdgpu_device_ip_init failed [...] drmn0: Fatal error during GPU init [...] drmn0: amdgpu: finishing device. [...] device_attach: drmn0 attach returned 2 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] iwlwifi0: <iwlwifi> mem 0xfc800000-0xfc803fff at device 0.0 on pci6 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-73.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 73.35c0a2c6.0 cc-a0-73.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ums0 on uhub2 [...] ums0: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub0 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/2.00, addr 2> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <CY040402014C0300> on usbus2 [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0029, class 224/1, rev 2.01/0.01, addr 3> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x11 status 0x6a0 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6a0 [...] usbd_setup_device_desc: getting device descriptor at addr 17 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 20 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=20, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 20 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 23 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_req_re_enumerate: addr=34, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 34 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=34, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 34 failed, USB_ERR_IOERROR [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 16, addr 34 (ignored) [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_req_re_enumerate: addr=38, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 38 failed, USB_ERR_IOERROR [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_req_re_enumerate: addr=49, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 49 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_req_re_enumerate: addr=54, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 54 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=54, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 54 failed, USB_ERR_IOERROR [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 16, addr 54 (ignored) [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 55 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6a0 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 59 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 60 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 61 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 62 (disconnected) [...] urndis0: detached [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_setup_device_desc: getting device descriptor at addr 63 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_setup_device_desc: getting device descriptor at addr 67 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=67, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 67 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=67, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 67 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=67, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 67 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=67, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 67 failed, USB_ERR_IOERROR [...] ugen0.2: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 72 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 73 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] pid 34612 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) [...] pid 22142 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 74 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x11 status 0x6a0 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 80 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] pid 39375 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 81 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 82 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 83 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 84 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 85 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 86 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 87 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 88 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 89 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 90 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 91 (disconnected) [...] urndis0: detached [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] pid 58660 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 100 (disconnected) [...] urndis0: detached [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub0, port 16, addr 102 (disconnected) [...] urndis0: detached [...] usbd_setup_device_desc: getting device descriptor at addr 103 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=103, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 103 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=103, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 103 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=103, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 103 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=103, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 103 failed, USB_ERR_IOERROR [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 16, addr 103 (ignored) [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 106 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=106, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 106 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=106, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 106 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=106, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 106 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=106, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 106 failed, USB_ERR_IOERROR [...] ugen0.2: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 114 failed, USB_ERR_IOERROR [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 16, addr 114 (ignored) [...] ugen0.2: <Google product 0x4ee1> at usbus0 [...] ugen0.2: <Google product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 119 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 124 failed, USB_ERR_IOERROR [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] usbd_setup_device_desc: getting device descriptor at addr 9 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=9, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 9 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_req_re_enumerate: addr=11, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=11, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_IOERROR [...] usb_alloc_device: Failure selecting configuration index 0:USB_ERR_IOERROR, port 16, addr 11 (ignored) [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.2: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_setup_device_desc: getting device descriptor at addr 20 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=20, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 20 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_setup_device_desc: getting device descriptor at addr 27 failed, USB_ERR_IOERROR [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.2: <Google Pixel 2> at usbus0 [...] pid 8626 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] ugen0.2: <Google Pixel 2> at usbus0 (disconnected) [...] pid 9604 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 9605 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2h55m38s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-STABLE #0 stable/13-n253206-c6ec1b441ad3: Fri Dec 2 18:27:28 CST 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 7 2700 Eight-Core Processor (4000.30-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16530845696 (15765 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 13 12 6 3 2 7 11 4 5 10 15 1 14 9 8 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcba0d000-0xcba0d01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x2> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc980000-0xfc99ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <network> at device 0.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc707fff at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xfc600000-0xfc61ffff,0xfc620000-0xfc623fff at device 0.0 on pci9 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> at device 9.0 on pci3 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0x7e00000000-0x7effffffff,0x7f00000000-0x7f001fffff,0xfce00000-0xfce3ffff at device 0.0 on pci11 [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfce60000-0xfce63fff at device 0.1 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pci12: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci12 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfcd08000-0xfcd08fff at device 0.2 on pci13 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] hdac1: <AMD X370 HDA Controller> mem 0xfcd00000-0xfcd07fff at device 0.3 on pci13 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1999999005 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub1 on usbus2 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] nvd0: <Samsung SSD 970 EVO Plus 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC1220 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM035-1RK172 LCM2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM048-2E7172 SDM1> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] ugen2.2: <Dell Dell USB Entry Keyboard> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] uhub2: 22 ports with 22 removable, self powered [...] ugen2.3: <Cooler Master Technology Inc. MM711 Gaming Mouse> at usbus2 [...] ukbd1 on uhub1 [...] ukbd1: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] ugen1.2: <SanDisk Cruzer Glide> at usbus1 [...] umass0 on uhub0 [...] umass0: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.27, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:9:0: Attached to scbus9 [...] da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] da0: <SanDisk Cruzer Glide 1.27> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14803MB (30316544 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <vendor 0x8087 product 0x0029> at usbus0 [...] CPU: AMD Ryzen 7 2700 Eight-Core Processor (4000.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F9 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xFCE00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: xxx-xxx-xxx [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: could not load firmware image 'amdgpu/polaris10_mc.bin' [...] amdgpu: mc: Failed to load firmware "amdgpu/polaris10_mc.bin" [...] [drm ERROR :gmc_v8_0_sw_init] Failed to load mc firmware! [...] [drm ERROR :amdgpu_device_ip_init] sw_init of IP block <gmc_v8_0> failed -2 [...] drmn0: amdgpu_device_ip_init failed [...] drmn0: Fatal error during GPU init [...] drmn0: amdgpu: finishing device. [...] device_attach: drmn0 attach returned 2 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] iwlwifi0: <iwlwifi> mem 0xfc800000-0xfc803fff at device 0.0 on pci6 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-73.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 73.35c0a2c6.0 cc-a0-73.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ums0 on uhub1 [...] ums0: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] uhid1 on uhub1 [...] uhid1: <CY040402014C0300> on usbus2 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x0029, class 224/1, rev 2.01/0.01, addr 2> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 1715 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 1720 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 1998 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 2277 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 2274 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 2835 (c++), jid 0, uid 0, was killed: failed to reclaim memory [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 5 (disconnected) [...] urndis0: detached [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 6 (disconnected) [...] urndis0: detached [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_IOERROR [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 11 (disconnected) [...] urndis0: detached [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 12 (disconnected) [...] urndis0: detached [...] usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_IOERROR [...] ugen0.4: <vendor 0x18d1 product 0x4ee3> at usbus0 [...] ugen0.4: <vendor 0x18d1 product 0x4ee3> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_setup_device_desc: getting device descriptor at addr 19 failed, USB_ERR_IOERROR [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] usbd_req_re_enumerate: addr=26, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 26 failed, USB_ERR_IOERROR [...] ugen0.4: <vendor 0x18d1 product 0x4ee3> at usbus0 [...] ugen0.4: <vendor 0x18d1 product 0x4ee3> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 28 (disconnected) [...] urndis0: detached [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 29 (disconnected) [...] urndis0: detached [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] usbd_setup_device_desc: getting device descriptor at addr 30 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=30, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 30 failed, USB_ERR_IOERROR [...] ugen0.4: <vendor 0x18d1 Pixel 2> at usbus0 [...] ugen0.4: <vendor 0x18d1 Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 32 (disconnected) [...] urndis0: detached [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x403 [...] usbd_setup_device_desc: getting device descriptor at addr 33 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=33, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 33 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=33, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 33 failed, USB_ERR_IOERROR [...] usbd_setup_device_desc: getting device descriptor at addr 33 failed, USB_ERR_IOERROR [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] uhub_reattach_port: giving up port 16 reset - device vanished: change 0x1 status 0x6e1 [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <vendor 0x18d1 product 0x4ee1> at usbus0 [...] ugen0.4: <vendor 0x18d1 product 0x4ee1> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] ugen0.4: <Google Pixel 2> at usbus0 (disconnected) [...] urndis0: at uhub2, port 16, addr 40 (disconnected) [...] urndis0: detached [...] ugen0.4: <Google Pixel 2> at usbus0 [...] urndis0 on uhub2 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1h14m51s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-STABLE #0 stable/13-n253206-c6ec1b441ad3: Fri Dec 2 18:27:28 CST 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 7 2700 Eight-Core Processor (4001.87-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16530845696 (15765 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 13 14 11 10 3 12 15 5 4 7 9 2 6 1 8 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcba0d000-0xcba0d01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x2> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfc980000-0xfc99ffff at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <network> at device 0.0 (no driver attached) [...] pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc700000-0xfc707fff at device 0.0 on pci7 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci3 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xfc600000-0xfc61ffff,0xfc620000-0xfc623fff at device 0.0 on pci9 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> at device 9.0 on pci3 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0x7e00000000-0x7effffffff,0x7f00000000-0x7f001fffff,0xfce00000-0xfce3ffff at device 0.0 on pci11 [...] hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfce60000-0xfce63fff at device 0.1 on pci11 [...] pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pci12: <unknown> at device 0.0 (no driver attached) [...] pci12: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci12 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <unknown> at device 0.0 (no driver attached) [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfcd08000-0xfcd08fff at device 0.2 on pci13 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] hdac1: <AMD X370 HDA Controller> mem 0xfcd00000-0xfcd07fff at device 0.3 on pci13 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1999999032 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 250GB> NVMe namespace [...] nvd0: 238475MB (488397168 512 byte sectors) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 [...] hdacc1: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc1 [...] pcm6: <Realtek ALC1220 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 [...] pcm7: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm8: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM035-1RK172 LCM2> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST1000LM048-2E7172 SDM1> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 8 ports with 8 removable, self powered [...] ugen2.2: <Dell Dell USB Entry Keyboard> at usbus2 [...] ukbd0 on uhub0 [...] ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 1> on usbus2 [...] kbd2 at ukbd0 [...] uhub2: 22 ports with 22 removable, self powered [...] ugen2.3: <Cooler Master Technology Inc. MM711 Gaming Mouse> at usbus2 [...] ukbd1 on uhub0 [...] ukbd1: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <Google Pixel 2> at usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Glide (0x0781:0x5575) [...] ugen1.2: <SanDisk Cruzer Glide> at usbus1 [...] umass0 on uhub1 [...] umass0: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.27, addr 1> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:9:0: Attached to scbus9 [...] da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 [...] da0: <SanDisk Cruzer Glide 1.27> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14803MB (30316544 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.3: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.4: <vendor 0x8087 product 0x0029> at usbus0 [...] CPU: AMD Ryzen 7 2700 Eight-Core Processor (4000.00-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F9 0xE7). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0xFCE00000 [...] [drm] register mmio size: 262144 [...] [drm] add ip block number 0 <vi_common> [...] [drm] add ip block number 1 <gmc_v8_0> [...] [drm] add ip block number 2 <tonga_ih> [...] [drm] add ip block number 3 <gfx_v8_0> [...] [drm] add ip block number 4 <sdma_v3_0> [...] [drm] add ip block number 5 <powerplay> [...] [drm] add ip block number 6 <dm> [...] [drm] add ip block number 7 <uvd_v6_0> [...] [drm] add ip block number 8 <vce_v3_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: xxx-xxx-xxx [...] [drm] UVD is enabled in VM mode [...] [drm] UVD ENC is enabled in VM mode [...] [drm] VCE enabled in VM mode [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' [...] drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [...] drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [...] [drm] Detected VRAM RAM=4096M, BAR=4096M [...] [drm] RAM width 256bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 8323100 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 4096M of VRAM memory ready [...] [drm] amdgpu: 4096M of GTT memory ready. [...] [drm] GART: num cpu pages 65536, num gpu pages 65536 [...] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [...] [drm] Chained IB support enabled! [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' [...] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [...] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [...] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [...] drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] UVD and UVD ENC initialized successfully. [...] [drm] VCE initialized successfully. [...] drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [...] [drm] fb mappable at 0x7E00830000 [...] [drm] vram apper at 0x7E00000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x7e00830000 vbase=0xfffffe0115430000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] iwlwifi0: <iwlwifi> mem 0xfc800000-0xfc803fff at device 0.0 on pci6 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-73.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwlwifi0: loaded firmware version 73.35c0a2c6.0 cc-a0-73.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [...] iwlwifi0: Detected RF HR B3, rfid=0x10a100 [...] iwlwifi0: base HW address: XXX [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Cooler Master Technology Inc. MM711 Gaming Mouse, class 0/0, rev 2.00/3.10, addr 2> on usbus2 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/2.00, addr 2> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <CY040402014C0300> on usbus2 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x0029, class 224/1, rev 2.01/0.01, addr 3> on usbus0 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize()