[...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan02' [...] vlan2: changing name to 'vlan03' [...] vlan3: changing name to 'vlan04' [...] vlan4: changing name to 'vlan05' [...] vlan5: changing name to 'vlan06' [...] vlan6: changing name to 'vlan07' [...] vlan7: changing name to 'vlan08' [...] vlan8: changing name to 'vlan09' [...] vlan9: changing name to 'vlan010' [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] ng0: changing name to 'pppoe1' [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on mlxen0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 27m26s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: 12th Gen Intel(R) Core(TM) i5-12500 (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x90675 Family=0x6 Model=0x97 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027ac<UMIP,PKU,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16315461632 (15559 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 9 8 4 5 11 6 7 10 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75a7f000-0x75a7f01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6004000000-0x6004ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0x86000000-0x86003fff at device 0.0 on pci2 [...] pcib3: <Intel Volume Management Device> mem 0x6002000000-0x6003ffffff,0x82000000-0x83ffffff,0x6005100000-0x60051fffff at device 14.0 on pci0 [...] pci3: <PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6005200000-0x600520ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x86120000-0x86121fff,0x86123000-0x861230ff,0x86122000-0x861227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 26.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x7a50) HDA Controller> mem 0x6005220000-0x6005223fff,0x6005000000-0x60050fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] pci0: <network, ethernet> at device 31.6 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC-low" frequency 1497620839 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] mlx4_core0: <mlx4_core> mem 0x85f00000-0x85ffffff,0x6000000000-0x60007fffff at device 0.0 on pci1 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing mlx4_core [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 12 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 12 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] uhub0: 25 ports with 25 removable, self powered [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 12 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 12 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.3: <vendor 0x03f0 HP USB Slim Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x03f0 HP USB Slim Keyboard, class 0/0, rev 1.10/1.22, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AWW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134ATW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134ABAW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134RMTW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] uhid0 on uhub0 [...] uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhid1 on uhub0 [...] uhid1: <vendor 0x03f0 HP USB Slim Keyboard, class 0/0, rev 1.10/1.22, addr 2> on usbus0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] mlxen0: tso4 disabled due to -txcsum. [...] mlxen0: tso6 disabled due to -txcsum6. [...] mlxen1: tso4 disabled due to -txcsum. [...] mlxen1: tso6 disabled due to -txcsum6. [...] mlxen1: link state changed to UP [...] vlan0: changing name to 'vlan01' [...] mlxen0: link state changed to UP [...] vlan1: changing name to 'vlan010' [...] vlan2: changing name to 'vlan02' [...] vlan3: changing name to 'vlan03' [...] vlan4: changing name to 'vlan04' [...] vlan5: changing name to 'vlan05' [...] vlan6: changing name to 'vlan06' [...] vlan7: changing name to 'vlan07' [...] vlan8: changing name to 'vlan08' [...] vlan9: changing name to 'vlan09' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe1' [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] ugen0.3: <vendor 0x03f0 HP USB Slim Keyboard> at usbus0 (disconnected) [...] ukbd0: at uhub0, port 8, addr 2 (disconnected) [...] ukbd0: detached [...] uhid1: at uhub0, port 8, addr 2 (disconnected) [...] uhid1: detached [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] arp: packet with unknown hardware format 0x06 received on vlan06 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 43m6s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: 12th Gen Intel(R) Core(TM) i5-12500 (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x90675 Family=0x6 Model=0x97 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16315559936 (15559 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 5 6 7 8 9 11 2 3 10 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75a7f000-0x75a7f01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6004000000-0x6004ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0x86000000-0x86003fff at device 0.0 on pci2 [...] pcib3: <Intel Volume Management Device> mem 0x6002000000-0x6003ffffff,0x82000000-0x83ffffff,0x6005100000-0x60051fffff at device 14.0 on pci0 [...] pci3: <PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6005200000-0x600520ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x86120000-0x86121fff,0x86123000-0x861230ff,0x86122000-0x861227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 26.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x7a50) HDA Controller> mem 0x6005220000-0x6005223fff,0x6005000000-0x60050fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC-low" frequency 1497622199 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] mlx4_core0: <mlx4_core> mem 0x85f00000-0x85ffffff,0x6000000000-0x60007fffff at device 0.0 on pci1 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing 0000:01:00.0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] uhub0: 25 ports with 25 removable, self powered [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 12 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 12 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 12 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 12 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 34s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: 12th Gen Intel(R) Core(TM) i5-12500 (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x90675 Family=0x6 Model=0x97 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16315559936 (15559 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 10 7 8 11 9 5 4 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75a7f000-0x75a7f01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6004000000-0x6004ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0x86000000-0x86003fff at device 0.0 on pci2 [...] pcib3: <Intel Volume Management Device> mem 0x6002000000-0x6003ffffff,0x82000000-0x83ffffff,0x6005100000-0x60051fffff at device 14.0 on pci0 [...] pci3: <PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6005200000-0x600520ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x86120000-0x86121fff,0x86123000-0x861230ff,0x86122000-0x861227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 26.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x7a50) HDA Controller> mem 0x6005220000-0x6005223fff,0x6005000000-0x60050fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC-low" frequency 1497622369 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] mlx4_core0: <mlx4_core> mem 0x85f00000-0x85ffffff,0x6000000000-0x60007fffff at device 0.0 on pci1 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing 0000:01:00.0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] uhub0: 25 ports with 25 removable, self powered [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 12 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 12 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 12 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 12 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 39s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: 12th Gen Intel(R) Core(TM) i5-12500 (2995.20-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x90675 Family=0x6 Model=0x97 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16315564032 (15559 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 7 6 5 4 8 9 10 2 11 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75a7f000-0x75a7f01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6004000000-0x6004ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0x86000000-0x86003fff at device 0.0 on pci2 [...] pcib3: <Intel Volume Management Device> mem 0x6002000000-0x6003ffffff,0x82000000-0x83ffffff,0x6005100000-0x60051fffff at device 14.0 on pci0 [...] pci3: <PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6005200000-0x600520ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x86120000-0x86121fff,0x86123000-0x861230ff,0x86122000-0x861227ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 26.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x7a50) HDA Controller> mem 0x6005220000-0x6005223fff,0x6005000000-0x60050fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] Timecounter "TSC-low" frequency 1497621608 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 500GB> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] mlx4_core0: <mlx4_core> mem 0x85f00000-0x85ffffff,0x6000000000-0x60007fffff at device 0.0 on pci1 [...] mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) [...] mlx4_core: Initializing 0000:01:00.0 [...] mlx4_core0: Unable to determine PCI device chain minimum BW [...] em0: <Intel(R) I219-V RPL(22)> mem 0x86100000-0x8611ffff at device 31.6 on pci0 [...] em0: Setup init failure [...] em0: Setup of Shared code failed, error -5 [...] em0: IFDI_ATTACH_PRE failed 6 [...] device_attach: em0 attach returned 6 [...] mlx4_en mlx4_core0: Activating port:1 [...] mlxen0: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 1: Using 12 TX rings [...] mlxen0: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 1: Using 8 RX rings [...] mlx4_en: mlxen0: Using 12 TX rings [...] mlx4_en: mlxen0: Using 8 RX rings [...] mlx4_en: mlxen0: Initializing port [...] mlx4_en mlx4_core0: Activating port:2 [...] mlxen1: Ethernet address: ... [...] mlx4_en: mlx4_core0: Port 2: Using 12 TX rings [...] mlxen1: link state changed to DOWN [...] mlx4_en: mlx4_core0: Port 2: Using 8 RX rings [...] mlx4_en: mlxen1: Using 12 TX rings [...] mlx4_en: mlxen1: Using 8 RX rings [...] mlx4_en: mlxen1: Initializing port [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 25 ports with 25 removable, self powered [...] ugen0.2: <AsusTek Computer Inc. AURA LED Controller> at usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered