[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p11 391fd1153(truenas/12.0-stable) TRUENAS amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.03-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16398327808 (15638 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1197015604 Hz quality 1000 [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] padlock0: No ACE support. [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL PE_SC3> on motherboard [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] ipmi0: <IPMI System Interface> port 0xca8,0xcac on acpi0 [...] ipmi0: KCS mode found at io 0xca8 on acpi [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf0fc000-0xdf0fc3ff irq 22 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 16 at device 0.0 on pci3 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: [...] bce0: link state changed to DOWN [...] ASIC (0x57092008); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 17 at device 0.1 on pci3 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: [...] bce1: link state changed to DOWN [...] ASIC (0x57092008); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci6 [...] miibus2: <MII bus> on bce2 [...] brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce2: Using defaults for TSO: 65518/35/2048 [...] bce2: Ethernet address: ... [...] bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci6 [...] miibus3: <MII bus> on bce3 [...] brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce3: Using defaults for TSO: 65518/35/2048 [...] bce3: Ethernet address: ... [...] bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf0fe000-0xdf0fe3ff irq 22 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] vgapci0: <VGA-compatible display> mem 0xd5800000-0xd5ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci7 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Ibex Peak SATA300 controller> port 0xfca0-0xfca7,0xfc90-0xfc93,0xfca8-0xfcaf,0xfc94-0xfc97,0xfcc0-0xfccf,0xfcd0-0xfcdf irq 20 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Ibex Peak SATA300 controller> port 0xfcb0-0xfcb7,0xfc98-0xfc9b,0xfcb8-0xfcbf,0xfc9c-0xfc9f,0xfce0-0xfcef,0xfcf0-0xfcff irq 21 at device 31.5 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] ichwd0: <Intel 3420 watchdog timer> on isa0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 12 [...] device_attach: est3 attach returned 6 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled [...] ipmi0: IPMI device rev. 0, firmware rev. 1.70, version 2.0, device support mask 0xdf [...] ipmi0: Number of channels 5 [...] ipmi0: Attached watchdog [...] ipmi0: Establishing power cycle handler [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:boot-pool/ROOT/12.0-CUSTOM-NAS-113356_02 []... [...] Root mount waiting for: usbus0 usbus1 CAM [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ada0 at ata2 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 3815447MB (7814037168 512 byte sectors) [...] ada1 at ata2 bus 0 scbus0 target 1 lun 0 [...] ada1: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: 3815447MB (7814037168 512 byte sectors) [...] ada2 at ata3 bus 0 scbus1 target 0 lun 0 [...] ada2: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada2: 3815447MB (7814037168 512 byte sectors) [...] ada3 at ata3 bus 0 scbus1 target 1 lun 0 [...] ada3: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: 3815447MB (7814037168 512 byte sectors) [...] cd0 at ata5 bus 0 scbus3 target 0 lun 0 [...] cd0: <HL-DT-ST DVD-ROM DH40N A100> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Kingston DataTraveler 2.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29568MB (60555264 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.5: <Kingston DataTraveler 2.0> at usbus0 [...] umass1 on uhub2 [...] umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0xc101 [...] umass1:6:1: Attached to scbus6 [...] da1 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] da1: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 29568MB (60555264 512 byte sectors) [...] da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] lo0: link state changed to UP [...] GEOM_MIRROR: Device mirror/swap0 launched (2/2). [...] GEOM_MIRROR: Device mirror/swap1 launched (2/2). [...] GEOM_ELI: Device mirror/swap0.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] GEOM_ELI: Device mirror/swap1.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI> [...] bce0: Gigabit link up! [...] bce0: link state changed to UP [...] bce0: Gigabit link up! [...] bce0: Gigabit link up! [...] CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2394.03-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] bridge0: Ethernet address: ... [...] bridge0: link state changed to UP [...] bce0: promiscuous mode enabled [...] epair0a: Ethernet address: ... [...] epair0b: Ethernet address: ... [...] epair0a: link state changed to UP [...] epair0b: link state changed to UP [...] epair0a: changing name to 'vnet0.1' [...] vnet0.1: promiscuous mode enabled [...] lo0: link state changed to UP [...] epair1a: Ethernet address: ... [...] epair1b: Ethernet address: ... [...] epair1a: link state changed to UP [...] epair1b: link state changed to UP [...] epair1a: changing name to 'vnet0.2' [...] epair1b: changing name to 'epair0b' [...] vnet0.2: promiscuous mode enabled [...] lo0: link state changed to UP