[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p7 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz (3399.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16555687936 (15788 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1699542288 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf2000000-0xf2ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf3080000-0xf3083fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf3200000-0xf320ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf3218000-0xf32183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf3210000-0xf3213fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf3104000-0xf3104fff,0xf3100000-0xf3103fff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf3217000-0xf32173ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf3216000-0xf32167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0 [...] ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc1: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Crucial CT512MX100SSD1 MU01> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] cd0 at ahcich5 bus 0 scbus3 target 0 lun 0 [...] cd0: <ATAPI iHAS324 F CL8N> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WDS100T1B0A-00H9H0 X41100WD> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada2: <ADATA SP550 P0330AA> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada2: Command Queueing enabled [...] ada2: 457862MB (937703088 512 byte sectors) [...] Trying to mount root from ufs:/dev/ada2p2 [rw]... [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] uhub1: 17 ports with 17 removable, self powered [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] uhub3: 4 ports with 4 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.3: <vendor 0x1a86 USB2.0-Print> at usbus0 [...] ugen0.4: <vendor 0x046a product 0x0023> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub1 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub1 [...] uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0 [...] ulpt0 on uhub1 [...] ulpt0: <vendor 0x1a86 USB2.0-Print, class 0/0, rev 1.10/2.54, addr 2> on usbus0 [...] ulpt0: using bi-directional mode [...] ulpt0: out of paper [...] re0: link state changed to UP [...] uhub2: at usbus2, port 1, addr 1 (disconnected) [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 (disconnected) [...] uhub4: at uhub2, port 1, addr 2 (disconnected) [...] uhub4: detached [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] uhub0: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 (disconnected) [...] uhub3: at uhub0, port 1, addr 2 (disconnected) [...] uhub3: detached [...] uhub1: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 (disconnected) [...] ums0: at uhub1, port 5, addr 1 (disconnected) [...] ums0: detached [...] ugen0.3: <vendor 0x1a86 USB2.0-Print> at usbus0 (disconnected) [...] ulpt0: at uhub1, port 9, addr 2 (disconnected) [...] ulpt0: detached [...] ugen0.4: <vendor 0x046a product 0x0023> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 10, addr 3 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub1, port 10, addr 3 (disconnected) [...] uhid0: detached [...] acpi0: cleared fixed power button status [...] re0: link state changed to DOWN [...] NVRM: GPU at PCI:0000:01:00: GPU-HASH_654-EFBB-E020-D279-71BDA7C1A623 [...] NVRM: Xid (PCI:0000:01:00): 13, pid=997, Graphics SM Warp Exception on (GPC 0, TPC 0): Illegal Instruction Encoding [...] NVRM: Xid (PCI:0000:01:00): 13, pid=997, Graphics Exception: ESR 0x504648=0x3e0009 0x504650=0x0 0x504644=0x13eff2 0x50464c=0x7f [...] NVRM: Xid (PCI:0000:01:00): 13, pid=997, Graphics Exception: ChID 0008, Class 0000a197, Offset 00001614, Data 00000000 [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: 17 ports with 17 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] re0: link state changed to UP [...] ugen0.3: <vendor 0x1a86 USB2.0-Print> at usbus0 [...] ulpt0 on uhub0 [...] ulpt0: <vendor 0x1a86 USB2.0-Print, class 0/0, rev 1.10/2.54, addr 2> on usbus0 [...] ulpt0: using bi-directional mode [...] ulpt0: out of paper [...] ugen0.4: <vendor 0x046a product 0x0023> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0