[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p10-HBSD #0 517e44a00df(stable/20.7)-dirty: Mon Sep 21 16:21:17 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1280x1024 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3972550656 (3788 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <JetWay Em10xcPo> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20181213/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC" frequency 2000048400 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812507c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <JetWay Em10xcPo> on motherboard [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd1012000-0xd10127ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd1000000-0xd100ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xd0f00000-0xd0f1ffff,0xd0f20000-0xd0f23fff irq 17 at device 0.0 on pci3 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 18 at device 2.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 4.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xd0e00000-0xd0e1ffff,0xd0e20000-0xd0e23fff irq 17 at device 0.0 on pci7 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 1.0 on pci9 [...] pci10: <PCI bus> on pcib10 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xd0d00000-0xd0d1ffff,0xd0d20000-0xd0d23fff irq 19 at device 0.0 on pci10 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <PCI-PCI bridge> irq 16 at device 2.0 on pci9 [...] pci11: <PCI bus> on pcib11 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb000-0xb01f mem 0xd0c00000-0xd0c1ffff,0xd0c20000-0xd0c23fff irq 16 at device 0.0 on pci11 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <PCI-PCI bridge> irq 17 at device 3.0 on pci9 [...] pci12: <PCI bus> on pcib12 [...] igb4: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xa000-0xa01f mem 0xd0b00000-0xd0b1ffff,0xd0b20000-0xd0b23fff irq 17 at device 0.0 on pci12 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 18 at device 4.0 on pci9 [...] pci13: <PCI bus> on pcib13 [...] igb5: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x9000-0x901f mem 0xd0a00000-0xd0a1ffff,0xd0a20000-0xd0a23fff irq 18 at device 0.0 on pci13 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] pcib15: <ACPI PCI-PCI bridge> at device 0.0 on pci14 [...] pci15: <ACPI PCI bus> on pcib15 [...] pcib16: <PCI-PCI bridge> irq 16 at device 1.0 on pci15 [...] pci16: <PCI bus> on pcib16 [...] igb6: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x8000-0x801f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci16 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib17: <PCI-PCI bridge> irq 17 at device 2.0 on pci15 [...] pci17: <PCI bus> on pcib17 [...] igb7: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7000-0x701f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci17 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib18: <PCI-PCI bridge> irq 18 at device 3.0 on pci15 [...] pci18: <PCI bus> on pcib18 [...] igb8: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x6000-0x601f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci18 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib19: <PCI-PCI bridge> irq 19 at device 4.0 on pci15 [...] pci19: <PCI bus> on pcib19 [...] igb9: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x5000-0x501f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci19 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS32GMSA370 P1225CH1> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]... [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] igb1: link state changed to UP [...] igb9: link state changed to UP [...] lo0: link state changed to UP [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] igb9: link state changed to DOWN [...] vlan0: changing name to 'igb9_vlan7' [...] igb1: link state changed to DOWN [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] tun1: changing name to 'ovpnc1' [...] igb9: link state changed to UP [...] igb9_vlan7: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpnc1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] DUMMYNET 0xfffff800030612c0 with IPv6 initialized (100409) [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled