Probe #aa96dcf9dd of ONDA B550SD4-ITX Ver:1.00 Desktop Computer (B550SD4-ITX)
Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(vga): resolution 640x480
[...] CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.45-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
[...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
[...] TSC: P-state invariant, performance statistics
[...] real memory = 17179869184 (16384 MB)
[...] avail memory = 14413664256 (13745 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <ALASKA A M I >
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 2 1 3
[...] random: entropy device external interface
[...] wlan: mac acl policy registered
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] vtvga0: <VT VGA driver>
[...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
[...] smbios0: Version: 3.3, BCD Revision: 3.3
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 450
[...] Event timer "HPET1" frequency 14318180 Hz quality 450
[...] Event timer "HPET2" frequency 14318180 Hz quality 450
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
[...] pci2: <ACPI PCI bus> on pcib2
[...] pcib3: <PCI-PCI bridge> irq 25 at device 1.0 on pci2
[...] pci3: <PCI bus> on pcib3
[...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xfc700000-0xfc7fffff,0xfc800000-0xfc803fff irq 25 at device 0.0 on pci3
[...] igc0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igc0: Using 4 RX queues 4 TX queues
[...] igc0: Using MSI-X interrupts with 5 vectors
[...] igc0: Ethernet address: ...
[...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib4: <PCI-PCI bridge> irq 26 at device 2.0 on pci2
[...] pci4: <PCI bus> on pcib4
[...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xfc400000-0xfc4fffff,0xfc500000-0xfc503fff irq 26 at device 0.0 on pci4
[...] igc1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igc1: Using 4 RX queues 4 TX queues
[...] igc1: Using MSI-X interrupts with 5 vectors
[...] igc1: Ethernet address: ...
[...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib5: <PCI-PCI bridge> irq 27 at device 3.0 on pci2
[...] pci5: <PCI bus> on pcib5
[...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xfc100000-0xfc1fffff,0xfc200000-0xfc203fff irq 27 at device 0.0 on pci5
[...] igc2: Using 1024 TX descriptors and 1024 RX descriptors
[...] igc2: Using 4 RX queues 4 TX queues
[...] igc2: Using MSI-X interrupts with 5 vectors
[...] igc2: Ethernet address: ...
[...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib6: <PCI-PCI bridge> irq 24 at device 4.0 on pci2
[...] pci6: <PCI bus> on pcib6
[...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xfbe00000-0xfbefffff,0xfbf00000-0xfbf03fff irq 24 at device 0.0 on pci6
[...] igc3: Using 1024 TX descriptors and 1024 RX descriptors
[...] igc3: Using 4 RX queues 4 TX queues
[...] igc3: Using MSI-X interrupts with 5 vectors
[...] igc3: Ethernet address: ...
[...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib7: <ACPI PCI-PCI bridge> at device 1.2 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcea0000-0xfcea7fff irq 28 at device 0.0 on pci7
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] ahci0: <AHCI SATA controller> mem 0xfce80000-0xfce9ffff irq 29 at device 0.1 on pci7
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] pcib8: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci7
[...] pci8: <ACPI PCI bus> on pcib8
[...] pcib9: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci8
[...] pci9: <ACPI PCI bus> on pcib9
[...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfcd04000-0xfcd04fff,0xfcd00000-0xfcd03fff irq 28 at device 0.0 on pci9
[...] re0: Using 1 MSI-X message
[...] re0: turning off MSI enable bit.
[...] re0: Chip rev. 0x54000000
[...] re0: MAC rev. 0x00100000
[...] miibus0: <MII bus> on re0
[...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
[...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re0: Using defaults for TSO: 65518/35/2048
[...] re0: Ethernet address: ...
[...] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib10: <ACPI PCI-PCI bridge> at device 1.4 on pci0
[...] pci10: <ACPI PCI bus> on pcib10
[...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff irq 36 at device 0.0 on pci10
[...] pcib11: <ACPI PCI-PCI bridge> at device 8.1 on pci0
[...] pci11: <ACPI PCI bus> on pcib11
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcc00000-0xfcc7ffff irq 52 at device 0.0 on pci11
[...] vgapci0: Boot video device
[...] hdac0: <ATI (0x15de) HDA Controller> mem 0xfcc88000-0xfcc8bfff irq 53 at device 0.1 on pci11
[...] pci11: <encrypt/decrypt> at device 0.2 (no driver attached)
[...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff irq 55 at device 0.3 on pci11
[...] xhci1: 64 bytes context size, 64-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff irq 52 at device 0.4 on pci11
[...] xhci2: 64 bytes context size, 64-bit DMA
[...] usbus2 on xhci2
[...] usbus2: 5.0Gbps Super Speed USB v3.0
[...] hdac1: <AMD Raven HDA Controller> mem 0xfcc80000-0xfcc87fff irq 54 at device 0.6 on pci11
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_syscontainer0: <System Container> on acpi0
[...] cpu0: <ACPI CPU> on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 1796622857 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] ZFS filesystem version: 5
[...] ZFS storage pool version: features support (5000)
[...] ugen0.1: <AMD XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] ugen1.1: <AMD XHCI root HUB> at usbus1
[...] ugen2.1: <AMD XHCI root HUB> at usbus2
[...] uhub1 on usbus1
[...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub2 on usbus2
[...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
[...] nvd0: <ADATA SX8600 PRO> NVMe namespace
[...] nvd0: 976762MB (2000409264 512 byte sectors)
[...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
[...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
[...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
[...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
[...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
[...] pcm3: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24,26 on hdaa1
[...] pcm4: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa1
[...] Trying to mount root from zfs:zroot/ROOT/default []...
[...] uhub2: 2 ports with 2 removable, self powered
[...] uhub1: 8 ports with 8 removable, self powered
[...] uhub0: 14 ports with 14 removable, self powered