[...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xa1c60000-0xa1c7ffff,0xa1c8c000-0xa1c8ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xa1c40000-0xa1c5ffff,0xa1c88000-0xa1c8bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xa1c20000-0xa1c3ffff,0xa1c84000-0xa1c87fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xa1c00000-0xa1c1ffff,0xa1c80000-0xa1c83fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xa1b00000-0xa1b1ffff,0xa1b20000-0xa1b23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xa1a00000-0xa1a1ffff,0xa1a20000-0xa1a23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xa1900000-0xa191ffff,0xa1920000-0xa1923fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xa1800000-0xa181ffff,0xa1820000-0xa1823fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xa1700000-0xa171ffff,0xa1720000-0xa1723fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xa1600000-0xa161ffff,0xa1620000-0xa1623fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xa1500000-0xa151ffff,0xa1520000-0xa1523fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb11: <Intel(R) I211 (Copper)> mem 0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 19 at device 0.0 on pci10 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb12: <Intel(R) I211 (Copper)> mem 0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 16 at device 0.0 on pci11 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb13: <Intel(R) I211 (Copper)> mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 17 at device 0.0 on pci12 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 29.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa0ffffff,0xa1020000-0xa103ffff irq 18 at device 0.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1100000-0xa11fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996519 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB240G8 XCV10120> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] Dual Console: Serial Primary, Video Secondary [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b:0xff20) [...] ugen0.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] igb4: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen0.5: <American Megatrends Inc. Virtual Floppy Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb11: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen0.6: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass2 on uhub1 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xa1d18000-0xa1d180ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb4: link state changed to DOWN [...] vlan0: changing name to 'igb4_vlan500' [...] vlan1: changing name to 'igb4_vlan77' [...] igb11: link state changed to DOWN [...] igb4: link state changed to UP [...] igb4_vlan77: link state changed to UP [...] igb4_vlan500: link state changed to UP [...] igb11: link state changed to UP [...] pid 47312 (suricata), jid 0, uid 0, was killed: failed to reclaim memory [...] pid 85512 (unbound), jid 0, uid 59, was killed: failed to reclaim memory [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 3 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2946687<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,INVPCID,NFPUSG,MPX,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16547733504 (15781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xa1c60000-0xa1c7ffff,0xa1c8c000-0xa1c8ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xa1c40000-0xa1c5ffff,0xa1c88000-0xa1c8bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xa1c20000-0xa1c3ffff,0xa1c84000-0xa1c87fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xa1c00000-0xa1c1ffff,0xa1c80000-0xa1c83fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xa1b00000-0xa1b1ffff,0xa1b20000-0xa1b23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xa1a00000-0xa1a1ffff,0xa1a20000-0xa1a23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xa1900000-0xa191ffff,0xa1920000-0xa1923fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xa1800000-0xa181ffff,0xa1820000-0xa1823fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xa1700000-0xa171ffff,0xa1720000-0xa1723fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xa1600000-0xa161ffff,0xa1620000-0xa1623fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xa1500000-0xa151ffff,0xa1520000-0xa1523fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb11: <Intel(R) I211 (Copper)> mem 0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 19 at device 0.0 on pci10 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb12: <Intel(R) I211 (Copper)> mem 0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 16 at device 0.0 on pci11 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb13: <Intel(R) I211 (Copper)> mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 17 at device 0.0 on pci12 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 29.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa0ffffff,0xa1020000-0xa103ffff irq 18 at device 0.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1100000-0xa11fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996894 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB240G8 XCV10120> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw,noatime]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Dual Console: Serial Primary, Video Secondary [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b:0xff20) [...] ugen0.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] igb4: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen0.5: <American Megatrends Inc. Virtual Floppy Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb11: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen0.6: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass2 on uhub1 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xa1d18000-0xa1d180ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb4: link state changed to DOWN [...] vlan0: changing name to 'igb4_vlan500' [...] vlan1: changing name to 'igb4_vlan77' [...] igb11: link state changed to DOWN [...] igb4: link state changed to UP [...] igb4_vlan77: link state changed to UP [...] igb4_vlan500: link state changed to UP [...] igb11: link state changed to UP [...] igb12: link state changed to UP [...] igb13: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2946687<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,INVPCID,NFPUSG,MPX,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16547733504 (15781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xa1c60000-0xa1c7ffff,0xa1c8c000-0xa1c8ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xa1c40000-0xa1c5ffff,0xa1c88000-0xa1c8bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xa1c20000-0xa1c3ffff,0xa1c84000-0xa1c87fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xa1c00000-0xa1c1ffff,0xa1c80000-0xa1c83fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xa1b00000-0xa1b1ffff,0xa1b20000-0xa1b23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xa1a00000-0xa1a1ffff,0xa1a20000-0xa1a23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xa1900000-0xa191ffff,0xa1920000-0xa1923fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xa1800000-0xa181ffff,0xa1820000-0xa1823fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xa1700000-0xa171ffff,0xa1720000-0xa1723fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xa1600000-0xa161ffff,0xa1620000-0xa1623fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xa1500000-0xa151ffff,0xa1520000-0xa1523fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb11: <Intel(R) I211 (Copper)> mem 0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 19 at device 0.0 on pci10 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb12: <Intel(R) I211 (Copper)> mem 0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 16 at device 0.0 on pci11 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb13: <Intel(R) I211 (Copper)> mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 17 at device 0.0 on pci12 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 29.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa0ffffff,0xa1020000-0xa103ffff irq 18 at device 0.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1100000-0xa11fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996728 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB240G8 XCV10120> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Dual Console: Serial Primary, Video Secondary [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b: [...] 0xff20) [...] ugen0.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] igb4: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen0.5: <American Megatrends Inc. Virtual Floppy Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb11: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen0.6: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass2 on uhub1 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] igb12: link state changed to UP [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xa1d18000-0xa1d180ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb4: link state changed to DOWN [...] vlan0: changing name to 'igb4_vlan500' [...] vlan1: changing name to 'igb4_vlan77' [...] igb11: link state changed to DOWN [...] igb4: link state changed to UP [...] igb4_vlan77: link state changed to UP [...] igb4_vlan500: link state changed to UP [...] igb11: link state changed to UP [...] igb12: link state changed to DOWN [...] igb12: link state changed to UP [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: demoted by -240 to 0 (pfsync bulk fail) [...] igb12: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 8 0 0 done [...] All buffers synced. [...] igb12: link state changed to UP [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2946687<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,INVPCID,NFPUSG,MPX,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16547733504 (15781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xa1c60000-0xa1c7ffff,0xa1c8c000-0xa1c8ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xa1c40000-0xa1c5ffff,0xa1c88000-0xa1c8bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xa1c20000-0xa1c3ffff,0xa1c84000-0xa1c87fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xa1c00000-0xa1c1ffff,0xa1c80000-0xa1c83fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xa1b00000-0xa1b1ffff,0xa1b20000-0xa1b23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xa1a00000-0xa1a1ffff,0xa1a20000-0xa1a23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xa1900000-0xa191ffff,0xa1920000-0xa1923fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xa1800000-0xa181ffff,0xa1820000-0xa1823fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xa1700000-0xa171ffff,0xa1720000-0xa1723fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xa1600000-0xa161ffff,0xa1620000-0xa1623fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xa1500000-0xa151ffff,0xa1520000-0xa1523fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb11: <Intel(R) I211 (Copper)> mem 0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 19 at device 0.0 on pci10 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb12: <Intel(R) I211 (Copper)> mem 0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 16 at device 0.0 on pci11 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb13: <Intel(R) I211 (Copper)> mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 17 at device 0.0 on pci12 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 29.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa0ffffff,0xa1020000-0xa103ffff irq 18 at device 0.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1100000-0xa11fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996609 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB240G8 XCV10120> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] Dual Console: Serial Primary, Video Secondary [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: 5 ports with 5 removable, self powered [...] ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b:0xff20) [...] ugen0.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus0 [...] umass0 on uhub1 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] igb4: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen0.5: <American Megatrends Inc. Virtual Floppy Device> at usbus0 [...] umass1 on uhub1 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb11: link state changed to UP [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] igb12: link state changed to UP [...] ugen0.6: <American Megatrends Inc. Virtual HardDisk Device> at usbus0 [...] umass2 on uhub1 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xa1d1d000-0xa1d1dfff irq 16 at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xa1d18000-0xa1d180ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb4: link state changed to DOWN [...] vlan0: changing name to 'igb4_vlan500' [...] vlan1: changing name to 'igb4_vlan77' [...] igb12: link state changed to DOWN [...] igb11: link state changed to DOWN [...] igb4: link state changed to UP [...] igb4_vlan77: link state changed to UP [...] igb4_vlan500: link state changed to UP [...] igb12: link state changed to UP [...] igb11: link state changed to UP [...] igb4: promiscuous mode enabled [...] igb4_vlan500: promiscuous mode enabled [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] igb11: promiscuous mode enabled [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] igb4_vlan77: promiscuous mode enabled [...] carp: XXX@XXX: INIT -> BACKUP (initialization complete) [...] carp: demoted by 240 to 240 (pfsync bulk start) [...] carp: demoted by -240 to 0 (pfsync bulk fail) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: BACKUP -> MASTER (preempting a slower master) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] igb12: link state changed to DOWN [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] carp: XXX@XXX: BACKUP -> MASTER (master timed out) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] igb12: link state changed to UP [...] igb12: link state changed to DOWN [...] igb12: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb4_vlan77 [...] igb12: link state changed to DOWN [...] igb12: link state changed to UP [...] igb12: link state changed to DOWN [...] igb12: link state changed to UP [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] carp: XXX@XXX: MASTER -> BACKUP (more frequent advertisement received) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 5 5 0 0 0 done [...] All buffers synced. [...] Uptime: 7d6h20m45s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267992-a8a728bd015 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2946687<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,INVPCID,NFPUSG,MPX,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16547733504 (15781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xa1c60000-0xa1c7ffff,0xa1c8c000-0xa1c8ffff irq 16 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xa1c40000-0xa1c5ffff,0xa1c88000-0xa1c8bfff irq 17 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xa1c20000-0xa1c3ffff,0xa1c84000-0xa1c87fff irq 18 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xa1c00000-0xa1c1ffff,0xa1c80000-0xa1c83fff irq 19 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1d00000-0xa1d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem 0xa1d14000-0xa1d15fff,0xa1d1a000-0xa1d1a0ff,0xa1d19000-0xa1d197ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xa1b00000-0xa1b1ffff,0xa1b20000-0xa1b23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xa1a00000-0xa1a1ffff,0xa1a20000-0xa1a23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xa1900000-0xa191ffff,0xa1920000-0xa1923fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xa1800000-0xa181ffff,0xa1820000-0xa1823fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xa1700000-0xa171ffff,0xa1720000-0xa1723fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xa1600000-0xa161ffff,0xa1620000-0xa1623fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xa1500000-0xa151ffff,0xa1520000-0xa1523fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] igb11: <Intel(R) I211 (Copper)> mem 0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 19 at device 0.0 on pci10 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igb12: <Intel(R) I211 (Copper)> mem 0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 16 at device 0.0 on pci11 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] igb13: <Intel(R) I211 (Copper)> mem 0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 17 at device 0.0 on pci12 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 18 at device 29.6 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa0000000-0xa0ffffff,0xa1020000-0xa103ffff irq 18 at device 0.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1d10000-0xa1d13fff,0xa1100000-0xa11fffff irq 16 at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847995571 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB240G8 XCV10120> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw,noatime]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] Dual Console: Serial Primary, Video Secondary [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0