[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (3200.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbee3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 21474836480 (20480 MB) [...] avail memory = 20743217152 (19782 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 5 11 10 3 6 9 4 2 8 7 [...] Timecounter "TSC-low" frequency 1600049240 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf8000000-0xf9ffffff,0xd0000000-0xd7ffffff,0xd8000000-0xdbffffff irq 16 at device 0.0 on pci2 [...] nvidia0: <GeForce GTX 560 Ti> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF110 HDA Controller> mem 0xfa080000-0xfa083fff irq 17 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xfa500000-0xfa51ffff,0xfa544000-0xfa544fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfa543000-0xfa5433ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfa410000-0xfa4101ff irq 16 at device 0.0 on pci5 [...] ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] ahci1: <Marvell 88SE9172 AHCI SATA controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xfa310000-0xfa3101ff irq 17 at device 0.0 on pci6 [...] ahci1: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] ahci2: <Marvell 88SE9172 AHCI SATA controller> port 0xb040-0xb047,0xb030-0xb033,0xb020-0xb027,0xb010-0xb013,0xb000-0xb00f mem 0xfa210000-0xfa2101ff irq 18 at device 0.0 on pci7 [...] ahci2: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci2 [...] ahcich5: <AHCI channel> at channel 1 on ahci2 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfa100000-0xfa10ffff,0xfa111000-0xfa111fff,0xfa110000-0xfa110fff irq 18 at device 0.0 on pci10 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfa542000-0xfa5423ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] emu10kx0: <Creative SBLive! 5.1 [SB????]> port 0xa000-0xa01f irq 16 at device 0.0 on pci12 [...] pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 [...] pcm0: <SigmaTel STAC9708/11 AC97 Codec> [...] pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 [...] pci12: <input device> at device 0.1 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci3: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfa541000-0xfa5417ff irq 19 at device 31.2 on pci0 [...] ahci3: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich6: <AHCI channel> at channel 0 on ahci3 [...] ahcich7: <AHCI channel> at channel 1 on ahci3 [...] ahcich8: <AHCI channel> at channel 2 on ahci3 [...] ahcich9: <AHCI channel> at channel 3 on ahci3 [...] ahcich10: <AHCI channel> at channel 4 on ahci3 [...] ahcich11: <AHCI channel> at channel 5 on ahci3 [...] ahciem0: <AHCI enclosure management bridge> on ahci3 [...] pcib13: <ACPI Host-PCI bridge> on acpi0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pci13: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.4 (no driver attached) [...] pci13: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0016) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc0 [...] pcm2: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <NVIDIA (0x0016) HDA CODEC> at cad 1 on hdac0 [...] hdaa1: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA (0x0016) HDA CODEC> at cad 2 on hdac0 [...] hdaa2: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc2 [...] pcm4: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA (0x0016) HDA CODEC> at cad 3 on hdac0 [...] hdaa3: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc3 [...] pcm5: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] ugen1.1: <0x1b73 XHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 CAM usbus1 usbus2 [...] uhub0: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus12 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] ada0: <CT1000BX500SSD1 M6CR030> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus7 target 0 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen1.2: <PixArt USB Optical Mouse> at usbus1 [...] uhub2: 2 ports with 2 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen2.3: <Logitech USB Keyboard> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <USB Keyboard> on usbus2 [...] kbd2 at ukbd0 [...] ioat0: <SNB IOAT Ch0> mem 0xfa53c000-0xfa53ffff at device 4.0 on pci0 [...] ioat0: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat1: <SNB IOAT Ch1> mem 0xfa538000-0xfa53bfff at device 4.1 on pci0 [...] ioat1: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat2: <SNB IOAT Ch2> mem 0xfa534000-0xfa537fff at device 4.2 on pci0 [...] ioat2: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat3: <SNB IOAT Ch3> mem 0xfa530000-0xfa533fff at device 4.3 on pci0 [...] ioat3: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat4: <SNB IOAT Ch4> mem 0xfa52c000-0xfa52ffff at device 4.4 on pci0 [...] ioat4: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat5: <SNB IOAT Ch5> mem 0xfa528000-0xfa52bfff at device 4.5 on pci0 [...] ioat5: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat6: <SNB IOAT Ch6> mem 0xfa524000-0xfa527fff at device 4.6 on pci0 [...] ioat6: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] ioat7: <SNB IOAT Ch7> mem 0xfa520000-0xfa523fff at device 4.7 on pci0 [...] ioat7: Capabilities: e7<Extended_APIC_ID,Block_Fill,Move_CRC,Marker_Skipping,CRC,Page_Break> [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <USB Keyboard> on usbus2 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 1741 (colmap), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 1886 (colmap), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 1904 (colmap), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 1955 (colmap), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 1961 (colmap), jid 0, uid 1001: exited on signal 11 (core dumped)