[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16283164672 (15528 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 1 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x71cb4000-0x71cb4017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.5 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] [1] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] [1] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] [1] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] [1] acpi0: Power Button (fixed) [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80b00000-0x80b01fff,0x80b03000-0x80b030ff,0x80b02000-0x80b027ff at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] sdhci_pci0: <Generic SD HCI> mem 0x600112b000-0x600112bfff at device 26.0 on pci0 [...] [1] sdhci_pci0: 1 slot(s) allocated [...] [1] mmc0: <MMC/SD bus> on sdhci_pci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <network> at device 0.0 (no driver attached) [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0x80904000-0x80904fff,0x80900000-0x80903fff at device 0.0 on pci2 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: turning off MSI enable bit. [...] [1] re0: ASPM disabled [...] [1] re0: Chip rev. 0x54000000 [...] [1] re0: MAC rev. 0x00100000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80804000-0x80804fff,0x80800000-0x80803fff at device 0.0 on pci3 [...] [1] re1: Using 1 MSI-X message [...] [1] re1: turning off MSI enable bit. [...] [1] re1: ASPM disabled [...] [1] re1: Chip rev. 0x54000000 [...] [1] re1: MAC rev. 0x00100000 [...] [1] miibus1: <MII bus> on re1 [...] [1] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] [1] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pci0: <simple comms> at device 30.0 (no driver attached) [...] [1] pci0: <serial bus> at device 30.3 (no driver attached) [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1689603284 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] mmc0: No compatible cards found on bus [...] [2] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <Realtek ALC897 (Internal Analog)> at nid 26 and 18 on hdaa0 [...] [2] pcm1: <Realtek ALC897 (Analog)> at nid 27 and 24 on hdaa0 [...] [2] pcm2: <Realtek ALC897 (Front Analog Mic)> at nid 25 on hdaa0 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ADATA SU800 Q0125A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <NS256GSSD340 V0823A0> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 244198MB (500118192 512 byte sectors) [...] [3] uhub0: 16 ports with 16 removable, self powered [...] [4] Root mount waiting for: usbus0 [...] [4] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] [4] uhub1 on uhub0 [...] [4] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] [4] uhub1: 4 ports with 4 removable, self powered [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.3: <Realtek Bluetooth Radio> at usbus0 [...] [8] re0: link state changed to UP [...] [8] re1: link state changed to UP [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [9] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001128000-0x60011280ff at device 31.4 on pci0 [...] [9] smbus0: <System Management Bus> on ichsmb0 [...] [9] rtw880: <rtw_8821ce> port 0x5000-0x50ff mem 0x80a00000-0x80a0ffff at device 0.0 on pci1 [...] [9] rtw88/rtw8821c_fw.bin: could not load binary firmware /boot/firmware/rtw88/rtw8821c_fw.bin either [...] [9] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] [9] rtw880: Firmware version 24.8.0, H2C version 12 [...] [9] rtw880: failed to init rx buffer [...] [9] rtw880: failed to allocate pci resources [...] [9] rtw880: failed to setup pci resources [...] [9] device_attach: rtw880 attach returned 16 [...] [10] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] [10] acpi_wmi0: cannot find EC device [...] [10] acpi_wmi0: Embedded MOF found [...] [10] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [10] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] [10] acpi_wmi1: cannot find EC device [...] [10] acpi_wmi1: Embedded MOF found [...] [10] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [12] lo0: link state changed to UP [...] [14] pflog0: permanently promiscuous mode enabled [...] [14] re1: link state changed to DOWN [...] [14] re0: link state changed to DOWN [...] [17] re1: link state changed to UP [...] [18] re0: link state changed to UP [...] [45] re1: link state changed to DOWN [...] [48] re1: link state changed to UP [...] [51] re1: link state changed to DOWN [...] [53] re1: link state changed to UP [...] [71] re1: link state changed to DOWN [...] [75] re1: link state changed to UP [...] [413] re1: link state changed to DOWN [...] [416] re1: link state changed to UP [...] [3053] re1: link state changed to DOWN [...] [3055] re1: link state changed to UP [...] [3402] wg0: link state changed to UP [...] [4397] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [4397] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [4397] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] [4402] All buffers synced. [...] [4402] Uptime: 1h13m22s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16283152384 (15528 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 1 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x71cb4000-0x71cb4017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.5 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] [1] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] [1] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] [1] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] [1] acpi0: Power Button (fixed) [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80b00000-0x80b01fff,0x80b03000-0x80b030ff,0x80b02000-0x80b027ff at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] sdhci_pci0: <Generic SD HCI> mem 0x600112b000-0x600112bfff at device 26.0 on pci0 [...] [1] sdhci_pci0: 1 slot(s) allocated [...] [1] mmc0: <MMC/SD bus> on sdhci_pci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <network> at device 0.0 (no driver attached) [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0x80904000-0x80904fff,0x80900000-0x80903fff at device 0.0 on pci2 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: ASPM disabled [...] [1] re0: Chip rev. 0x54000000 [...] [1] re0: MAC rev. 0x00100000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80804000-0x80804fff,0x80800000-0x80803fff at device 0.0 on pci3 [...] [1] re1: Using 1 MSI-X message [...] [1] re1: ASPM disabled [...] [1] re1: Chip rev. 0x54000000 [...] [1] re1: MAC rev. 0x00100000 [...] [1] miibus1: <MII bus> on re1 [...] [1] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] [1] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pci0: <simple comms> at device 30.0 (no driver attached) [...] [1] pci0: <serial bus> at device 30.3 (no driver attached) [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1689606743 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] mmc0: No compatible cards found on bus [...] [2] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <Realtek ALC897 (Internal Analog)> at nid 26 and 18 on hdaa0 [...] [2] pcm1: <Realtek ALC897 (Analog)> at nid 27 and 24 on hdaa0 [...] [2] pcm2: <Realtek ALC897 (Front Analog Mic)> at nid 25 on hdaa0 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ADATA SU800 Q0125A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] [2] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <NS256GSSD340 V0823A0> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 244198MB (500118192 512 byte sectors) [...] [3] uhub0: 16 ports with 16 removable, self powered [...] [4] Root mount waiting for: usbus0 [...] [4] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] [4] uhub1 on uhub0 [...] [4] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] [4] uhub1: 4 ports with 4 removable, self powered [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.3: <Realtek Bluetooth Radio> at usbus0