[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p2 stable/24.7-n267758-4ad7ad40bc77 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.45-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28000800<SYSCALL,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16608931840 (15839 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 3 2 7 6 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0ce0-0xf0cfe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <GBT GBTUACPI> [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xfaffc000-0xfaffffff irq 17 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfbefe000-0xfbefffff irq 17 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfbdff000-0xfbdfffff,0xfbdf8000-0xfbdfbfff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <PCI bus> on pcib6 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xce00-0xceff mem 0xfbcfc000-0xfbcfffff irq 19 at device 0.0 on pci5 [...] skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus1: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696147076 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <(0x1033) XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC889 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST95005620AS SD24> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.3: <Dell Dell USB Keyboard> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.50, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.4: <PixArt USB Optical Mouse> at usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] re0: link state changed to UP [...] sk0: link state changed to UP [...] ichsmb0: <Intel Cougar Point SMBus controller> port 0x500-0x51f mem 0xfbffb000-0xfbffb0ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub3 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] sk0: link state changed to DOWN [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] sk0: link state changed to UP [...] sk0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 7m3s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.50-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28000800<SYSCALL,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16610717696 (15841 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 2 4 3 7 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0ce0-0xf0cfe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <GBT GBTUACPI> [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xfaffc000-0xfaffffff irq 17 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfbefe000-0xfbefffff irq 17 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfbdff000-0xfbdfffff,0xfbdf8000-0xfbdfbfff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <PCI bus> on pcib6 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xce00-0xceff mem 0xfbcfc000-0xfbcfffff irq 19 at device 0.0 on pci5 [...] skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus1: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696148619 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <(0x1033) XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC889 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST95005620AS SD24> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen2.3: <Dell Dell USB Keyboard> at usbus2 [...] ukbd0 on uhub4 [...] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.50, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus2 [...] ugen2.4: <PixArt USB Optical Mouse> at usbus2 [...] re0: link state changed to UP [...] sk0: link state changed to DOWN [...] ichsmb0: <Intel Cougar Point SMBus controller> port 0x500-0x51f mem 0xfbffb000-0xfbffb0ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub4 [...] ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] 883.257398 [1167] generic_netmap_attach Emulated adapter for sk0 created (prev was NULL) [...] 883.257420 [1072] generic_netmap_dtor Emulated netmap adapter for sk0 destroyed [...] 883.257437 [1167] generic_netmap_attach Emulated adapter for sk0 created (prev was NULL) [...] 883.257447 [1072] generic_netmap_dtor Emulated netmap adapter for sk0 destroyed [...] 883.257460 [1167] generic_netmap_attach Emulated adapter for sk0 created (prev was NULL) [...] 883.257470 [1072] generic_netmap_dtor Emulated netmap adapter for sk0 destroyed [...] 883.259164 [1167] generic_netmap_attach Emulated adapter for sk0 created (prev was NULL) [...] 883.259227 [ 319] generic_netmap_register Emulated adapter for sk0 activated [...] re0: link state changed to UP [...] 501.680180 [ 294] generic_netmap_unregister Emulated adapter for sk0 deactivated [...] 501.680245 [1072] generic_netmap_dtor Emulated netmap adapter for sk0 destroyed [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2h25m43s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.44-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28000800<SYSCALL,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16610713600 (15841 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 7 2 4 6 3 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0ce0-0xf0cfe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <GBT GBTUACPI> [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20221020/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xfaffc000-0xfaffffff irq 17 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfbefe000-0xfbefffff irq 17 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 32-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfbdff000-0xfbdfffff,0xfbdf8000-0xfbdfbfff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <PCI bus> on pcib6 [...] skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xce00-0xceff mem 0xfbcfc000-0xfbcfffff irq 19 at device 0.0 on pci5 [...] skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus1: <MII bus> on sk0 [...] e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696146791 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <(0x1033) XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC889 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST95005620AS SD24> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] ugen2.3: <Dell Dell USB Keyboard> at usbus2 [...] ukbd0 on uhub4 [...] ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.50, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus2 [...] ugen2.4: <PixArt USB Optical Mouse> at usbus2