[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x60c to 0x60f [...] CPU: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (2527.06-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 3221225472 (3072 MB) [...] avail memory = 3080359936 (2937 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <PTLTD APIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1263530604 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <DELL M09 > on motherboard [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xdfffffff,0xfc000000-0xfc00ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV620 HDA Controller> mem 0xfc010000-0xfc013fff irq 17 at device 0.1 on pci1 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 16 at device 26.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 21 at device 26.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 19 at device 26.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc504800-0xfc504bff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801I HDA Controller> mem 0xfc500000-0xfc503fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros 9285> mem 0xf8000000-0xf800ffff irq 17 at device 0.0 on pci2 [...] [ath] AR9285E_20 detected; using XE TX gain tables [...] [ath] AR9285 Main LNA config: LNA2 [...] [ath] AR9285 Alt LNA config: LNA1 [...] [ath] LNA diversity enabled, Diversity enabled [...] [ath] Enabling diversity for Kite [...] ath0: [HT] enabling HT modes [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9285 mac 192.2 RF5133 phy 14.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib4: [GIANT-LOCKED] [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pcib5: [GIANT-LOCKED] [...] pci3: <ACPI PCI bus> on pcib5 [...] bge0: <Broadcom NetLink Gigabit Ethernet Controller , ASIC rev. 0x5784100> mem 0xfc100000-0xfc10ffff irq 17 at device 0.0 on pci3 [...] bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0 [...] usbus4 on uhci3 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0 [...] usbus5 on uhci4 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 [...] usbus6 on uhci5 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc504c00-0xfc504fff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] pci4: <serial bus, FireWire> at device 1.0 (no driver attached) [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xfc200800-0xfc2008ff irq 18 at device 1.1 on pci4 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem 0xfc504000-0xfc5047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <IDT 92HD73C1 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <IDT 92HD73C1 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <IDT 92HD73C1 (Analog 2.0+HP/2.0)> at nid 13,10 and 14 on hdaa1 [...] pcm2: <IDT 92HD73C1 (Analog)> at nid 15 and 19 on hdaa1 [...] usbus5: usbus4: 12Mbps Full Speed USB v1.0 [...] 12Mbps Full Speed USB v1.0 [...] usbus6: usbus7: 12Mbps Full Speed USB v1.0 [...] 480Mbps High Speed USB v2.0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/ada0p2 [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST9250320AS DE04> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <TSSTcorp DVD+-RW TS-T633A DW20> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open [...] uhub3: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus3 [...] Root mount waiting for: usbus3 [...] ugen0.2: <Broadcom BCM2046B1> at usbus0 [...] uhub8 on uhub3 [...] uhub8: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2> on usbus0 [...] uhub8: 3 ports with 0 removable, self powered [...] ugen3.2: <SONiX Technology Inc. LaptopIntegratedWebcam2M> at usbus3 [...] mountroot: waiting for device /dev/ada0p2... [...] ugen0.3: <vendor 0x413c product 0x8157> at usbus0 [...] ukbd0 on uhub8 [...] ukbd0: <vendor 0x413c product 0x8157, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x413c product 0x8158> at usbus0 [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (RV620 0x1002:0x95C4 0x1028:0x029F 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: Dell_HepburnFM6 [...] drmn0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [...] drmn0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [...] Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [...] [drm] Detected VRAM RAM=256M, BAR=256M [...] [drm] RAM width 64bits DDR [...] [TTM] Zone kernel: Available graphics memory: 1551248 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 256M of VRAM memory ready [...] [drm] radeon: 512M of GTT memory ready. [...] [drm] Loading RV620 Microcode [...] radeon/RV620_pfp.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/RV620_pfp.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_RV620_pfp_bin [...] radeon/RV620_me.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/RV620_me.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_RV620_me_bin [...] radeon/R600_rlc.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/R600_rlc.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_R600_rlc_bin [...] [drm] radeon: power management initialized [...] radeon/R600_uvd.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/R600_uvd.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_R600_uvd_bin [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0x0xfffff80030502c00 [...] drmn0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0x0xfffff800d00521d0 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] radeon atom DIG backlight initialized [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] VGA-1 [...] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 1: [...] [drm] LVDS-1 [...] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [...] [drm] Encoders: [...] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [...] [drm] Connector 2: [...] [drm] HDMI-A-1 [...] [drm] HPD1 [...] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY [...] [drm] fb mappable at 0xD0243000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 4096000 [...] [drm] fb depth is 24 [...] [drm] pitch is 5120 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=800 width=1280 depth=32 [...] cmsize=16 size=4096000 [...] pbase=0xd0243000 vbase=0xfffff800d0243000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] wlan0: link state changed to UP [...] ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0, final_rix=0 [...] ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 [...] ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0, final_rix=0 [...] ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 [...] ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0, final_rix=0 [...] ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 [...] ums0 on uhub8 [...] ums0: <vendor 0x413c product 0x8158, class 0/0, rev 2.00/1.00, addr 4> on usbus0 [...] ums0: 3 buttons and [XY] coordinates ID=2 [...] ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0, final_rix=0 [...] ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0