[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3392.36-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 21474836480 (20480 MB) [...] avail memory = 20724195328 (19764 MB) [...] CPU microcode: updated from 0x17 to 0x21 [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1696179788 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000024 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d18000-0xf7d183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros 9227> mem 0xf7c00000-0xf7c0ffff irq 19 at device 1.0 on pci3 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: Enabling register serialisation [...] ath0: AR9227 mac 384.2 RF5133 phy 15.15 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xf7c10000-0xf7c100ff irq 18 at device 2.0 on pci3 [...] miibus1: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d16000-0xf7d167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/ada0s3a [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 250GB RVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HTS541010B7E610 04.01A04> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ses0: ada1 in 'Slot 02', SATA Slot: scbus1 target 0 [...] ada2 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada2: <HGST HTS541010B7E610 04.01A04> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 953869MB (1953525168 512 byte sectors) [...] ses0: ada2 in 'Slot 04', SATA Slot: scbus2 target 0 [...] GEOM_MIRROR: Device mirror/gm0 launched (2/2). [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x090c product 0x1000> at usbus0 [...] umass0 on uhub0 [...] umass0: <vendor 0x090c product 0x1000, class 0/0, rev 2.00/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:4:0: Attached to scbus4 [...] Root mount waiting for: usbus1 usbus2 CAM [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: < 1100> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7720MB (15810560 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen1.3: <Logitech Inc. Logitech USB Headset H340> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Dell Dell USB Entry Keyboard> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.5: <Genius Optical Mouse> at usbus1 [...] mountroot: waiting for device /dev/ada0s3a... [...] info: [drm] Initialized drm 1.1.0 20060810 [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: <Intel IvyBridge> on vgapci0 [...] info: [drm] Memory usable by graphics device = 2048M [...] info: [drm] MTRR allocation failed. Graphics performance may suffer. [...] intel_iicbb0 on drmn0 [...] iicbus0: <Philips I2C bus> on iicbb_nostop0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] iicbus1: <Philips I2C bus> on intel_gmbus0 [...] iic1: <I2C generic I/O> on iicbus1 [...] intel_iicbb1 on drmn0 [...] iicbus2: <Philips I2C bus> on iicbb_nostop1 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] iicbus3: <Philips I2C bus> on intel_gmbus1 [...] iic3: <I2C generic I/O> on iicbus3 [...] intel_iicbb2 on drmn0 [...] iicbus4: <Philips I2C bus> on iicbb_nostop2 addr 0xff [...] iic4: <I2C generic I/O> on iicbus4 [...] iicbus5: <Philips I2C bus> on intel_gmbus2 [...] iic5: <I2C generic I/O> on iicbus5 [...] intel_iicbb3 on drmn0 [...] iicbus6: <Philips I2C bus> on iicbb_nostop3 addr 0xff [...] iic6: <I2C generic I/O> on iicbus6 [...] iicbus7: <Philips I2C bus> on intel_gmbus3 [...] iic7: <I2C generic I/O> on iicbus7 [...] intel_iicbb4 on drmn0 [...] iicbus8: <Philips I2C bus> on iicbb_nostop4 addr 0xff [...] iic8: <I2C generic I/O> on iicbus8 [...] iicbus9: <Philips I2C bus> on intel_gmbus4 [...] iic9: <I2C generic I/O> on iicbus9 [...] intel_iicbb5 on drmn0 [...] iicbus10: <Philips I2C bus> on iicbb_nostop5 addr 0xff [...] iic10: <I2C generic I/O> on iicbus10 [...] iicbus11: <Philips I2C bus> on intel_gmbus5 [...] iic11: <I2C generic I/O> on iicbus11 [...] info: [drm] MSI enabled 1 message(s) [...] info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [...] info: [drm] Driver supports precise vblank timestamp query. [...] intel_sdvo_ddc_proxy921920 on drmn0 [...] intel_sdvo_ddc_proxy921920: detached [...] drm_iic_dp_aux0 on drmn0 [...] drm_iic_dp_aux1 on drmn0 [...] drmn0: taking over the fictitious range 0xe0000000-0xf0000000 [...] info: [drm] Connector VGA-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.VGA-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector HDMI-A-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.HDMI-A-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector DP-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.DP-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector HDMI-A-2: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.HDMI-A-2 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector DP-2: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.DP-2 [...] info: [drm] - kern.vt.fb.default_mode [...] fbd0 on drmn0 [...] VT: Replacing driver "vga" with new "fb". [...] info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 [...] info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [...] lo0: link state changed to UP [...] rl0: link state changed to DOWN [...] re0: link state changed to DOWN [...] rl0: link state changed to UP [...] uaudio0 on uhub3 [...] uaudio0: <Logitech Inc. Logitech USB Headset H340, class 0/0, rev 2.00/1.15, addr 3> on usbus1 [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm4: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] ums0 on uhub3 [...] ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] info: [drm] capturing error event; look for more information in sysctl hw.dri.0.info.i915_error_state [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] VT: Switching back from "fb" to "vga". [...] vgapci0: REPOSTing [...] fbd0: detached [...] drm_iic_dp_aux0: detached [...] drm_iic_dp_aux1: detached [...] error: [drm:pid57927:drm_mm_takedown] *ERROR* Memory manager not clean. Delaying takedown [...] iic1: detached [...] iicbus1: detached [...] iic0: detached [...] iicbus0: detached [...] intel_iicbb0: detached [...] iic3: detached [...] iicbus3: detached [...] iic2: detached [...] iicbus2: detached [...] intel_iicbb1: detached [...] iic5: detached [...] iicbus5: detached [...] iic4: detached [...] iicbus4: detached [...] intel_iicbb2: detached [...] iic7: detached [...] iicbus7: detached [...] iic6: detached [...] iicbus6: detached [...] intel_iicbb3: detached [...] iic9: detached [...] iicbus9: detached [...] iic8: detached [...] iicbus8: detached [...] intel_iicbb4: detached [...] iic11: detached [...] iicbus11: detached [...] iic10: detached [...] iicbus10: detached [...] intel_iicbb5: detached [...] drmn0: detached [...] Warning: memory type drm_sman leaked memory on destroy (4 allocations, 512 bytes leaked). [...] Warning: memory type drm_kms leaked memory on destroy (1 allocations, 256 bytes leaked). [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3392.36-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 21474836480 (20480 MB) [...] avail memory = 20724195328 (19764 MB) [...] CPU microcode: updated from 0x17 to 0x21 [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 2 1 [...] Timecounter "TSC-low" frequency 1696180814 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000024 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d18000-0xf7d183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros 9227> mem 0xf7c00000-0xf7c0ffff irq 19 at device 1.0 on pci3 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: Enabling register serialisation [...] ath0: AR9227 mac 384.2 RF5133 phy 15.15 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 [...] rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xf7c10000-0xf7c100ff irq 18 at device 2.0 on pci3 [...] miibus1: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d16000-0xf7d167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] Trying to mount root from ufs:/dev/ada0s3a [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 250GB RVT01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HTS541010B7E610 04.01A04> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada2: <HGST HTS541010B7E610 04.01A04> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 953869MB (1953525168 512 byte sectors) [...] ses0: ada1 in 'Slot 02', SATA Slot: scbus1 target 0 [...] ses0: ada2,pass2 in 'Slot 04', SATA Slot: scbus2 target 0 [...] GEOM_MIRROR: Device mirror/gm0 launched (2/2). [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x090c product 0x1000> at usbus0 [...] umass0 on uhub0 [...] umass0: <vendor 0x090c product 0x1000, class 0/0, rev 2.00/11.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:4:0: Attached to scbus4 [...] Root mount waiting for: usbus1 usbus2 CAM [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: < 1100> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7720MB (15810560 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen1.3: <Logitech Inc. Logitech USB Headset H340> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Dell Dell USB Entry Keyboard> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.15, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.5: <Genius Optical Mouse> at usbus1 [...] mountroot: waiting for device /dev/ada0s3a... [...] info: [drm] Initialized drm 1.1.0 20060810 [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: <Intel IvyBridge> on vgapci0 [...] info: [drm] Memory usable by graphics device = 2048M [...] info: [drm] MTRR allocation failed. Graphics performance may suffer. [...] intel_iicbb0 on drmn0 [...] iicbus0: <Philips I2C bus> on iicbb_nostop0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] iicbus1: <Philips I2C bus> on intel_gmbus0 [...] iic1: <I2C generic I/O> on iicbus1 [...] intel_iicbb1 on drmn0 [...] iicbus2: <Philips I2C bus> on iicbb_nostop1 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] iicbus3: <Philips I2C bus> on intel_gmbus1 [...] iic3: <I2C generic I/O> on iicbus3 [...] intel_iicbb2 on drmn0 [...] iicbus4: <Philips I2C bus> on iicbb_nostop2 addr 0xff [...] iic4: <I2C generic I/O> on iicbus4 [...] iicbus5: <Philips I2C bus> on intel_gmbus2 [...] iic5: <I2C generic I/O> on iicbus5 [...] intel_iicbb3 on drmn0 [...] iicbus6: <Philips I2C bus> on iicbb_nostop3 addr 0xff [...] iic6: <I2C generic I/O> on iicbus6 [...] iicbus7: <Philips I2C bus> on intel_gmbus3 [...] iic7: <I2C generic I/O> on iicbus7 [...] intel_iicbb4 on drmn0 [...] iicbus8: <Philips I2C bus> on iicbb_nostop4 addr 0xff [...] iic8: <I2C generic I/O> on iicbus8 [...] iicbus9: <Philips I2C bus> on intel_gmbus4 [...] iic9: <I2C generic I/O> on iicbus9 [...] intel_iicbb5 on drmn0 [...] iicbus10: <Philips I2C bus> on iicbb_nostop5 addr 0xff [...] iic10: <I2C generic I/O> on iicbus10 [...] iicbus11: <Philips I2C bus> on intel_gmbus5 [...] iic11: <I2C generic I/O> on iicbus11 [...] info: [drm] MSI enabled 1 message(s) [...] info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [...] info: [drm] Driver supports precise vblank timestamp query. [...] intel_sdvo_ddc_proxy921920 on drmn0 [...] intel_sdvo_ddc_proxy921920: detached [...] drm_iic_dp_aux0 on drmn0 [...] drm_iic_dp_aux1 on drmn0 [...] drmn0: taking over the fictitious range 0xe0000000-0xf0000000 [...] info: [drm] Connector VGA-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.VGA-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector HDMI-A-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.HDMI-A-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector DP-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.DP-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector HDMI-A-2: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.HDMI-A-2 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector DP-2: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.DP-2 [...] info: [drm] - kern.vt.fb.default_mode [...] fbd0 on drmn0 [...] VT: Replacing driver "vga" with new "fb". [...] info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 [...] lo0: link state changed to UP [...] rl0: link state changed to DOWN [...] info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [...] rl0: link state changed to UP [...] re0: link state changed to DOWN [...] uaudio0 on uhub3 [...] uaudio0: <Logitech Inc. Logitech USB Headset H340, class 0/0, rev 2.00/1.15, addr 3> on usbus1 [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm4: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] ums0 on uhub3 [...] ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] info: [drm] capturing error event; look for more information in sysctl hw.dri.0.info.i915_error_state [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] ugen0.2: <vendor 0x090c product 0x1000> at usbus0 (disconnected) [...] umass0: at uhub0, port 4, addr 1 (disconnected) [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: < 1100> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [...] pid 99352 (gltron), jid 0, uid 1001: exited on signal 11 (core dumped)